Specifications

Exterior compartment construction – continued:
• All interior corners of the compartments shall be constructed with mitered and angled 1” wide full
height or width composite gussets for waterproof construction and compartment reinforcement
• Exterior corners shall be wrapped with glass fiber and resin for seamless construction and additional
strength
Interior compartment construction:
• Interior compartment wall dividers of the boy construction shall be single laminate composite material
not less than 3/8” wall thickness
• Compartment ceiling and floors shall be a single laminate not less than ½” thickness
• All interior corners of the compartments shall be constructed with mitered and angled 1” wide full
height or width composite gussets
Body lifting and tie-off provisions:
• Body shall have four (4) removable screw-in lifting and tie-off points for attachment of eyebolts
Equipment attachment:
• Threaded inserts shall be utilized to attach various bolt-on components and equipment to the surface of
the body
• Inserts shall be mechanically secured to allow for any attachment to exterior panels on the body
Energy absorption:
• Body construction shall have “shock absorbing” capabilities
Electrolysis:
• The body shall be of totally composite construction to provide total resistance to electrolysis.
Body weight consideration:
• Specified body and compartments shall be of the lightest weight material available
Thermal resistance:
• Body material shall not be subject to severe expansion and contraction
• Body material shall be self-extinguishing
Compartment ventilation provisions:
• Body compartments shall have louver provisions in walls for ventilation