Operation and Setup Quick Start Guide

OPERATION AND SETUP QUICK START GUIDE

Console Menu

When entering the Navigation setup menu the screen will have two options.

Navigation - To run the navigation mode.

Setup

- To enter the system settings.

Please note - Changing system settings can possibly interfere with the proper

operation of your navigation unit. If you are not familiar with the selection do

not make any changes. See you're installing dealer if you have further

questions.

Setup Menu: Allows personal configuration of the navigation unit as well as

provides information for diagnosis of any possible problems or issues.

PAGE 1
OPERATION AND SETUP QUICK START GUIDE Console Menu When entering the Navigation setup menu the screen will have two options. Navigation - To run the navigation mode. Setup - To enter the system settings. Please note - Changing system settings can possibly interfere with the proper operation of your navigation unit. If you are not familiar with the selection do not make any changes. See you're installing dealer if you have further questions.
PAGE 2
Navigation Setup Navigation Setup allows you to locate the Navigation software on the built in memory. CAUTION - DO NOT CHANGE THIS UNLESS INSTRUCTED BY TECHNICAL SUPPORT. Changing this setting could stop your navigation from loading properly. GPS Monitor This screen supplies information on the GPS Antenna reception. System Setup Language allows you to select one of 18 choices for setup menu language. This does not affect the mapping only the system menus.
PAGE 3
System Volume System Volume: Adjusts the overall output volume for the navigation voice. Key-stroke volume: Adjusts the click sound when touching the screen. System Time Adjust the time in the system menus. NOTE: The mapping GPS time is set automatically by the GPS data. This does not affect the GPS System time. System Information This screen provides data on the operation of the GPS Navigation device. Initial Setup: Reset's the GPS unit to factory default settings.