User`s guide

5
ENGLISH
Mounting to a Mast
1. Orient the antenna base.
Makesurethebaseisorientedcorrectlyfor
thedirectionyouwanttopointtheantenna.
Use the illustration on the left as a guide.
Mounting
Well
Antenna points this way...
...or this way.
Screw Cover
Clamp
Wing Nut
U-Bolt
2. Attach the clamp assemblies to the base.
FindthetwoU-Bolts,thefourwingnuts,
and the two clamps included in this
package.
 InserteachU-Boltintothebaseasshown
here.Thenpositionaclampandtwowing
nutsontheendofeachofU-Boltasshown
here.
3. Mount the base to the mast (not included).
Slidetheantennaclampassemblyoverthe
mastasshownhere,positioningthemast
between the clamp and the antenna.
 PositiontheANT800antennaashighas
possibleonthemast.Orientthebaseinthe
directionyouwant.Thentightentheclamps
andwingnutssecurelyontothemast.
4. Attach the arm to the base.
Findoneofthescrews,washers,andnuts
included in the package.
 First,setthewasherandnutinthe
mountingwell.Thenpositionthearmover
theothersideofthewell.Attachthearmto
the base as shown here.
continues on next page...