Specifications

Hooksett Fire –Rescue Department
Specifications for Stainless Steel Pumper Tanker Bid # 11-05
28
Bidder
Complies
Yes No
100" and shall be completely modular in design, allowing transfer of body components to a new
chassis in the event of an accident or wear. Body components shall be removable from the chassis
without cutting or bending.
The entire apparatus body shall be precision machined fabricated bolted construction, properly
reinforced with integral flanges eliminating the need for add-on structural shapes. Stainless button
head recessed alien head bolts and stainless aircraft style "ESNA" nuts shall be applied with proper
torque rating for each fastener. Wherever possible, body bolts shall be hidden from plain view for
appearance and ease of apparatus cleaning.
BODY MOUNTING
The entire Body shall be mounted with rubber isolators so as to allow chassis flex under the body as
well as to eliminate vibration. All Bidders shall describe in detail the means in which the body is
attached. Ubolt style body mounting is unacceptable
REAR OF BODY TOW EYES
Two (2) tow eyes with an eye diameter of not less than 3.5" shall be attached to the frame assembly.
The tow eyes shall be fabricated of .625" thick steel. Which extend through the rear of the apparatus.
TOP OF BODY CONSTRUCTION
The upper body shall be constructed of 12 and 14-gauge prime stainless steel. Exterior stainless steel
parts that are visible shall have #4B finish.
MODULAR BODY REQUIREMENTS
All body panels are to be laser cut on a CAM controlled laser to ensure accuracy (+/- .010"). T The
entire body shall be fabricated using precision holding fixtures to ensure accurate dimensions. The
body assembly shall be securely bolted to the sub-frame utilizing steel certified Grade 8 bolts.
The sub-frame shall be bolted to the chassis frame utilizing 2" certified Grade 8 bolts. A minimum of
four (4) bolts shall be used per sub-frame member. There shall be no welding of components to the
chassis frame.
Pop rivets or metal screws shall not be used in any part of the structural body build up. All fasteners
shall be stainless steel bolts with self-locking nuts of the proper size and strength for the required
application.
Major body components shall consist of right and left body sides, and rear facing compartments. The
pump module is to be completely separate from the main body to prevent damage due to flexing.
COMPARTMENT INTERIOR FINISH
For better interior visibility, to reflect light better, ease of maintenance and prevent the masking of poor
welds and questionable workmanship the interior of the body compartments shall remain uncoated.
COMPARTMENT EXTERIOR ROOF FINISH
The top of the compartments shall be brushed stainless steel. The roof shall contain 'Not a Stepping
Surface' labeling.