Specifications

Hooksett Fire –Rescue Department

Specifications for Stainless Steel Pumper Tanker Bid # 11-05

Bidder

Complies

Yes No

FOLDING TANK

Note: the department will supply a new portable 3000 US gallon Fol-Da-Tank brand, model FDTA-

3000-ALUM,

HOSEBED FLOODLIGHT

One (1) Unity AG hosebed floodlight shall be mounted at the front right corner of the hosebed. The

light shall be controlled from a water proof switch on the lamp head.

BODY SIDE SCENE LIGHTS

There shall be body side scene lights installed as high as possible and spread out as far as possible

on both sides of the apparatus body.

There shall be Four (4) Whelen Pioneer Series model PFA2 LED floodlight lamphead(s) provided.

The scene light(s) shall be mounted with a stainless steel housing. The housing shall protect the light

from the top and the two sides and shall incorporate a pivot mounting to allow the light to be adjusted

inside the housing. The scene lights shall be operated by a switch located in the driver's area of the

cab.

Additionally the (2) most rear lights shall come on when the transmission is placed in reverse.

BODY REAR SCENE LIGHTS

There shall be rear scene lights installed as high as possible on both sides of the rear of the apparatus

body.

The lighting positions shall have two (2) Whelen M6ZC white LED Scene lights mounted on Whelen

M6P15C 15° angled bright finished housings.

The rear scene lights shall be operated by a switch located beneath the left rear step. If the scene

light is left in the 'ON' position the lights shall automatically turn off when the truck’s parking brake is

released. There shall also be a switch in the driver's area to turn on the rear scene lights.

Additionally, the rear scene lights shall come on to supplement the back-up lights when the

transmission is placed into reverse.

ALUMINUM TRAYS - PULL OUT

Two (2) heavy duty pullout trays shall be installed and shall be equipped with stainless slides and a

gas shock to hold the tray in both the in and out positions and shall be made from 3/16" aluminum with

a maximum capacity of 250 pounds.

Each heavy duty pullout tray shall be installed as follows:

Exact location to be determined at preconstruction conference