Specifications

Proposal Number PSDF #P09-0004
Two (2) Fire Com Headset plug-in modules for interior mounting in apparatus. Single plug.
Two (2) cables will be required for the headset installation.
PUMP PANEL POSITION
Two (2) FireCom wireless headsets shall be furnished, One for pump operator and one for turntable operator.
They shall have minimum range of 100 feet.
Secure Red PTT button on the dome requires a solid push to activate and deactivate, eliminating the chance
of accidental transmissions. This headset will activate the radio as a transmit.
RADIO INTERFACECABLES
Two (2) radio interface cable will be provided for the following radio:
The intercom control shall be mounted on top of the engine enclosure within reach of the driver and officer.
RADIO ANTENNA MOUNTS
Two (2) NMO mount shall be roof mounted, on the officer's side of the cab.
The antenna mount shall be located 34 inches from the front face of the cab and 18 inches from the cab side.
The unterminated coax is to be routed in the cab to the radio power circuit termination.
The antenna wiring shall terminate in the center of the cab on top of the engine enclosure.
12VDC TRIPLE POWER POINT
A triple outlet 12 volt, socket (cigarette lighter) type, receptacle shall be provided.
The power point shall be wired to switched battery power with the appropriate wire size and fuse.
The power point socket shall be provided, centered on the front area of the engine doghouse for use by the
driver and/or officer.
12VDC POWER CIRCUIT
A circuit protected 30 amp battery "hot" circuit, a circuit protected 30 amp battery switched circuit, and a
ground circuit with the proper wire size to handle the current shall be provided. These circuits are provided
for two-way radio and/or accessory wiring.
The radio / accessory power circuit shall terminate in the center of the cab on top of the engine doghouse.
Page 121