Specifications

Proposal Number PSDF #P09-0004
flow. The outlet shall be equipped with a 2" polished stainless steel 90 degree swivel with 1-1/2" male NST
thread located in the hosebed.
This speedlay bed shall be capable of carrying two hundred fifty feet (250') of 1-3/4" double jacketed hose.
The speedlay hosebed shall have inside dimensions of 10" wide x 10-1/2" tall x 72" wide.
The bottom speedlay shall be equipped with a 1-1/2" male NST outlet. The speedlay shall be plumbed with
2" Schedule 40 stainless steel high pressure pipe. A 2" quarter turn ball valve shall be used to control water
flow. The outlet shall be equipped with a 2" polished stainless steel 90 degree swivel with 1-1/2" male NST
thread located in the hosebed.
This speedlay bed shall be capable of carrying two hundred fifty feet (250') of 1-3/4" double jacketed hose.
The speedlay hosebed shall have inside dimensions of 10" wide x 10-1/2" tall x 72" wide.
The speedlay valve controls shall be mounted on the operator's panel.
A 1/4 turn drain valve shall be installed on each speedlay. The valve shall be nickel plated with 3/4” NPT
female inlet and outlet thread.
Two (2) removable aluminum hose trays shall be provided for the speedlay hose beds.
Poly guides shall be provided at the sides, upper and lower edges of each speedlay opening on both sides of
the apparatus body to protect the hose and couplings.
DOUBLE SPEEDLAY HOSEBED WEBBING
Black webbing shall be provided over each side opening of the speedlay hosebeds, complete with Quick
release fasteners.
The walkway side of the speedlay assembly shall have a bright finished aluminum front cover.
LEFT SIDE DISCHARGES
The discharges on the left (street) side of the pump panel shall contain:
Two (2) 2-1/2" discharge shall be provided. The discharge outlet shall have a 2-1/2" quarter-turn swing-out
valve. The discharge shall be provided with chrome plated 30-degree discharge elbow with 2-1/2" NST male
threads that extends through the pump panel.
A chrome plated 2-1/2" NSTF to 1-1/2" NSTM rocker lug reducer with cap and chain shall be furnished
RIGHT SIDE DISCHARGES
The discharges on the right (curb) side of the pump panel shall contain:
A 2-1/2" discharge shall be provided. The discharge outlet shall have a 2-1/2" quarter-turn swing-out valve.
The discharge shall be provided with chrome plated 30-degree discharge elbow with 2-1/2" NST male
threads that extends through the pump panel.
Page 140