Specifications

Proposal Number PSDF #P09-0004
One (1) Fire Com Headset plug-in modules for interior mounting in apparatus. Single plug.
One (1) cable will be required for the headset installation.
CREW INTERCOM
The headset(s) shall be installed adjacent to the crew seating positions in the cab.
Two (2) Fire Com UH-20 headsets shall be provided, one each seat. Each headset shall have a noise-
canceling electret microphone, detent-volume control, liquid-foam ear seals. The headset is specially
designed dome accommodates most helmets and will not interfere with helmet fit or comfort. The
microphone boom rotates 180° to allow headset operation with right or left hand
Secure Black PTT button on the dome requires a solid push to activate and deactivate, eliminating the chance
of accidental transmissions. This headset will NOT activate the radio as a transmit.
Appropriate for crew positions.
Two (2) Fire Com Headset plug-in modules for interior mounting in apparatus. Single plug.
Two (2) cables will be required for the headset installation.
WIRELESS INTERCOM HEADSETS
Two (2) FireCom wireless headsets shall be furnished, One for pump operator and one for turntable operator.
They shall have minimum range of 100 feet.
Secure Red PTT button on the dome requires a solid push to activate and deactivate, eliminating the chance
of accidental transmissions. This headset will activate the radio as a transmit.
RADIO INTERFACE
A radio interface cable will be provided for the following radio:
The intercom control shall be mounted on top of the engine doghouse within reach of the driver and officer.
RADIO ANTENNA MOUNTS
Two (2) NMO mount shall be roof mounted, on the officer's side of the cab.
The antenna mount shall be located 34 inches from the front face of the cab and 18 inches from the cab side.
The unterminated coax is to be routed in the cab to the radio power circuit termination.
The antenna wiring shall terminate in the center of the cab on top of the engine enclosure.
Page 33