Specifications

Proposal Number PSDF #P09-0004
The gauge panel door shall be designed as an opening pump house service door on the street (left) side of the
pump house. This gauge panel door shall provide an opening minimum size of 41 inches wide by 14 inches
in height.
The lower section of the panel shall contain all inlets, outlets, and drains. All push-pull valve controls shall
have quarter turn locking control rods with chrome plated zinc tee handles. Guides for the push-pull control
rods shall be chrome plated zinc castings securely mounted to the pump panel. Push-pull valve controls shall
be capable of locking in any position. The control rods shall pull straight out of the panel and shall be
equipped with universal joints to eliminate binding.
There shall be an opening pump house service door on the curb (right) side of the pump house. This door
shall provide an opening minimum size of 41 inches wide by 14 inches in height.
PUMP PANEL IDENTIFICATION TAGS
The identification tag for each valve shall be recessed in the face of the control handle. All discharges shall
have color-coded plastic identification tags, with each discharge having its own unique color. Color-coding
shall include the labeling of the outlet and the drain for each corresponding discharge.
PUMP PANEL FINISH
All stainless panels used in the construction of the pump house shall have a brushed finish.
CONTROLS AND GAUGES
The following shall be provided on the pump and gauge panels in a neat and orderly fashion. The gauge
panel shall include the following:
ENFO-III ENGINE MESSAGE CENTER
The apparatus shall be equipped with the Class1 ENFO III Engine Information Display for the pump panel.
The ENFO III shall provide engine RPM, system voltage display and alarm, engine oil pressure display and
alarm, and engine temperature display and alarm. The ENFO III uses the SAE J-1587 data bus for its
information and does not require any additional sensors to be mounted. The message center shall provide the
following:
Engine Oil Pressure: With visual LED message and audible warning.
Engine Water Temperature: With visual LED message and audible warning.
Voltmeter: With visual LED message and audible warning.
Tachometer: With visual LED message.
CLASS 1 PRESSURE GOVERNOR - ELECTRONIC ENGINE CONTROL
An electronic control for engine speed based upon a preselect for "RPM" or pump "Pressure". The electronic
control for the engine is to operate as a pressure sensor (regulating) governor (PSG) eliminating any need for
a relief valve on the discharge side of the pump. The control shall have the following controls and display:
Mode select button for "RPM" or pump "Pressure"
Green light to indicate when "RPM" mode is selected.
Page 45