Specifications

Proposal Number PSDF #P09-0004

Standard Aerial Control Panel

The turntable shall have the control console mounted on the driver's side (when the aerial is stowed) with the

following items on the panel:

 One (1) switch for auto bedding

 One (1) turntable tracking light switch (panel lights and tracking lights shall be connected to

this switch)

 One (1) tip light switch (tip lights and telescoping lights shall be connected to this switch)

 One (1) rung alignment light

 One (1) emergency pump switch

 One (1) system pressure gauge, 0-5,000 psi minimum

 One (1) emergency stop button

 One (1) red light to indicate when outriggers are not fully extended

 One (1) switch to lock all aerial functions (high/low/off)

 Three (3) lights green, amber, and red with audible alarm for the aerial load system display

 Three (3) amber lights for left rotation disable, down disable, and right rotation disable.

 Three (3) remote monitor switches

 Three (3) handles for operation of the aerial for raise / lower, extension / retraction, and swing

left/right functions

The system shall be capable of performing simultaneous outrigger functions or simultaneous aerial functions.

Console Cover and Lighting

An aluminum treadplate hinged cover shall be provided on the turntable control console with one (1)

courtesy

light located in the cover.

Three (3) turntable work lights shall be provided on the turntable for added operator visibility and safety.

Standard Platform Control Panel

 One (1) switch for auto bedding

 One (1) platform light switch (tip lights and telescoping lights shall be connected to this

switch)