Specifications

Proposal Number PSDF #P09-0004
EXTERIOR COMPARTMENT LIGHTING
LED lights shall be furnished on both sides and top of door opening of all compartments including ladder
compartment.
UNDERBODY LIGHTING
Underbody ground lights shall be provided under the apparatus body as required by current NFPA 1901.
Four (4) Truck-Lite model #60 ground lights shall be provided at the rear of the apparatus body, two (2) each
side, to illuminate under the rear compartments.
There shall also be two (2) model #40 ground lights provided at the outer front corners of the apparatus body,
one (1) each side, to illuminate the area under the forward compartments and pump panel areas. All
underbody ground lights shall be switched on when the parking brake is set and the apparatus is running with
the master battery switch in the "ON" position.
FOLDING STEPS
Three (3) folding steps shall be provided on each side of the front of the body per NFPA requirements.
REAR TAILBOARD
A rear tailboard 8" deep shall be provided at the rear from aluminum treadplate meeting NFPA 1901 step
requirements. The tailboard shall provide protection for the rear body compartments and shall provided
recessed mounting for the rear ICC marker lights. It shall be bolted to the rear support structure.
REAR HANDRAILS
Two (2) ribbed, 1-1/4" diameter, aluminum handrails with chrome plated stanchions shall be supplied and
installed at rear of the apparatus body, one (1) on each side adjacent to the rear compartment door.
One (1) ribbed, 1-1/4" diameter, aluminum handrails with chrome plated stanchions shall be supplied and
installed on each side at rear of the apparatus body.
REAR TOW EYES
Two (2) heavy duty fabricated painted steel tow loops shall be provided on the rear of the chassis frame rails
extending through the rear of the body below the torque box compartment. The loops shall be manufactured
from a minimum of 1-1/4" thick 50,000 psi yield material and shall have a 3" interior diameter hole to allow
for the use of a tow chain end hook. The loops shall be attached to the frame rail with a minimum of four (4)
Grade 8 fasteners on each loop.
HOSEBED FLOODLIGHT
One (1) Unity AG hosebed floodlight shall be mounted at the front right corner of the hosebed. The light
shall be controlled from a water proof switch on the lamp head.
Page 80