Specifications

Proposal Number PSDF #P09-0004
SIDE MOUNTED TURN SIGNAL LIGHTS
Two (2) Whelen, model RSA02ZCR, linear amber LED turn signal lights shall be provided mounted one
each side in the front wheel well area. The lights shall be mounted in a chrome flange.
REAR STOP/TAIL/TURN/BACKUP LIGHTS
The rear of the apparatus shall be equipped with 6"x4" LED lights. The top light in the assembly shall be a
red LED stop/tail light. The middle light set shall be an amber LED lamp with a populated arrow shape,
and the lower lights shall be clear LED backup lights.
A one-piece polished aluminum trim casting shall be mounted around the rear stop/tail/turn and backup lights
on each side of the apparatus.
SIDE MOUNTED TURN SIGNAL LIGHTS
Two (2) Whelen, model RSA02ZCR, linear amber LED turn signal lights shall be provided mounted one
each side in the rear wheel well area. The lights shall be mounted in a chrome flange.
BACK-UP ALARM
A solid state electronic backup alarm shall be installed on the rear of the apparatus and wired to the backup
light circuit.
Additionally the backup lights shall be activated when the parking brake is set.
One (1) license plate mounting bracket and incandescent light shall be provided. The light and bracket shall
be located on the rear of the apparatus.
BACKUP CAMERA
There shall be an ASA Audiovox, or equal, video system provided on the apparatus.
The color monitor shall be an ASA AOM713WP. The 7 inch color LCD monitor contains a water proof
housing, circuit protection, backlit controls, integrated audio speaker, NTSC and PAL video signal
compatible, 3-camera inputs, manual (pushbutton) or automatic (trigger) source selection, auto power on
(standby) day / night brightness modes, on screen display (OSD) for AV source, picture adjustment and
volume level, non volatile memory for picture and volume adjustment settings, anti-glare / anti-scratch
protective lens, detachable sunshield.
The monitor for the back-up camera shall be mounted on top of the engine doghouse within view of the
driver to aide in backing up the apparatus.
The back up camera system shall be powered with the ignition power in the cab. Operation of the camera
will be by the driver with the monitor controls.
There shall be supplied a black & white, heavy duty high resolution observation camera, ASA Model
VBCS150B. The camera shall have a black housing, built-in microphone, enhanced low light performance
(0.5 LUX LED assisted), image orientation selector switch, and locking waterproof cable connector. The
camera shall have a non corrosive mounting bracket and stainless steel hardware.
Page 83