Specifications

44
VEHICLE DATA RECORDER
Apparatus shall be equipped with a Class1 “Vehicle Data Recorder and Seat Belt Warning System”
(VDR/SBW) The VDR/SBW will function per NFPA requirements The VDR data shall be
downloadable by USB cable to a computer using either Microsoft™ or Apple™ Operating Systems
using Class 1/ O.E.M. supplied reporting software.
SEAT BELT WARNING SYSTEM
There shall be a seat belt indicator system supplied in the cab. The indicator system shall indicate
seat belt use for each individual seating position when the seat is occupied, the seat belt remains
unfastened and the parking brake is released. A display panel shall be supplied in the driver’s
overhead dash area. The panel shall have an audible indicators and a red light display to indicate
that a seat belt has not been fastened.
FRONT BUMPER
A 12" high heavy-duty 10 gauge, polished stainless steel, wrap around, 2-rib front bumper shall be
provided the full width of the cab. The front bumper face shall extend 6 inches ahead of the front
face of the cab skin.
TOW HOOKS
Two chromed tow hooks shall be provided and shall be attached directly to the front frame under
the bumper. These tow hooks shall be attached with two Grade 8 bolts with hardened washers and
Grade "C" distorted thread locknuts.
FRONT BUMPER UNDERBODY LIGHTING
There shall be two (2) model #40 ground lights provided at the outer front corners of the front
bumper, one (1) each side, to illuminate the area under the front bumper of the truck. All
underbody ground lights shall be switched on when the parking brake is set and the ignition & the
master battery switch in the "ON" position.
AIR HORNS
Dual stutter tone air horns shall be recessed into the front bumper, one each side.
AIR HORN IGNITION CONTROL
To eliminate inadvertent operation the air horns shall be operable only when the battery selector
and ignition switch are in the "ON" position.
AIR HORN CONTROL SWITCHES
The chassis air horns shall be controlled by a lanyard with a 'Y-chain'. The lanyard chain shall be
mounted to the center of the overhead console within reach of both the driver and officer and shall
terminate at the cab center.
The air horn and the electric horn shall be sounded simultaneously by depressing the horn button in
the steering wheel.
ELECTRONIC SIREN
A Federal Signal 100 watt electronic siren control with microphone, model #PA300, shall be
provided. The siren control shall be mounted on top of the engine doghouse within reach of the