Specifications

61
REFLECTIVE SHELF/TRAY STRIPING
3M brand Scotchlite red/white reflective striping shall be affixed to the front face of all shelves and
pull out trays.
MISCELLANEOUS FASTENERS
One (1) bag of assorted fasteners (bolts, nuts, screws and washers) of the type used in construction
of the apparatus shall be provided as follows.
10 YEAR BODY STRUCTURALWARRANTY
The manufacturer shall provide a body structural warranty to the Town for a period of one hundred
twenty (120) months. The warranty period shall commence on the date the vehicle is delivered to
the Town.
PRECONSTRUCTION / ORDER CONFERENCE
There shall be a preconstruction conference held at the Moultonborough public safety building with
the selected bidder. To ensure accuracy, performance, operability, & reliability of the apparatus, the
preconstruction conference shall be conducted by the Dealer principal who shall also be The Sales
& Service engineer. This person shall have the following minimum resume to discuss the complete
apparatus and accurately describe the options included within.
EVT & ASE certified in the following:
Maintenance, Inspection, & testing of fire apparatus
Design & performance standards
Fire Pumps & accessories
Fire Apparatus Electrical systems
Aerial fire Apparatus
Allison Automatic transmissions
Certified fire fighter with a minimum of twenty five years of front line & management
experience
Is factory authorized to make major & minor decisions with regards to the
manufacturing of this apparatus.
To ensure a full understanding of the apparatus, this preconstruction conference will include the
following practices without exception.
Complete page by page, line by line review of the specifications and item descriptions.
The Sales engineer & Town shall initial each page as being reviewed. Changes or
modifications shall be noted in the left margin and initialed. A change order if required
shall be generated by the sales engineer after the meeting and approved by both prior to
submission to the factory.
Drawing review
Paint codes will be confirmed and entered into the order
Paint break location (for two tone paint) & designed will be reviewed
Hose loads shall be confirmed and documented
Lettering & stripe locations, fonts, etc shall be documented
Shelves, trays, tool-board, locations shall be confirmed
Electrical outlets shall be located and receptacle type confirmed
Titling information shall be confirmed and recorded to ensure the apparatus is titled
correctly
Town information such as points of contact, person/s authorized to make decisions and
changes to the apparatus (both major & minor) shall be confirmed and recorded