AVD300T SLOT-IN DVD PLAYER WITH BUILT-IN TV TUNER Owner’s Manual
A . Welcome Thank you for choosing the AVD300T DVD Player. The AVD300T is designed to optimize the enjoyment of your favorite DVDs in the mobile environment. This DVD Player is constructed to provide years of reliable, trouble-free service. Please read this manual thoroughly prior to operating the player and save it for future reference. B.
SAFETY PRECAUTION For safety reasons do not allow children to unfasten seat-belts to change video media or make any adjustments to the system. Enjoy your entertainment system but always remember the safety of all passengers is the number one priority.
. DISC Do not use irregularly shaped discs such as heart or star-shaped discs as they may cause the unit to malfunction. Do not stick paper, tape or glue on the disc. Do not expose the disc to direct sunlight or heat sources. Do not touch the surface of the disc. Handle the disc by its edges. Clean the disc by wiping the disc from the center out with a soft lint free cleaning cloth. Remove the disc from the unit and store it in its case after playing.
C. Contents 1. Main Unit 2. Remote control with two AAA Batteries 3. Power Cable 4. Two (2) Brackets with four (4) Screws 5. Owner's Manual 6. Power Adaptor* (4-Pin to 2-Pin) Cable 7. DVRCA * Adaptor for connection to a second monitor 8. RCA Cables ( Red, Yellow, and White) 9. Remote IR Receiver * For use with 8010730 Accessory Cable D. Controls Main Unit (Refer to Figure 1) 1. Power Button 2. Menu Button 3. Previous Button 4. Play & Up, Down, Left, Right Button 5. Next Button 6. Stop Button 7.
E.
F. Connections Figure 3 1. Powering Your DVD Player ( Refer to Figure 3) Connect the black wire (-) to the vehicle ground. Connect the red wire (+) to a switched (Accessory) 12VDC source. Plug the other end into the 12VDC input jack on the back of the unit. 2. Remote IR Receiver ( Refer to Figure 3) Plug the 1/8” jack on the remote IR cable into the IR IN jack on the back of the DVD player. Place the IR receiver anywhere in the vehicle to allow remote control from any location.
Figure 4 3. Connecting to an Audiovox Overhead Monitor The AVD300T can be connected to Audiovox Overhead monitors with the supplied adaptors (DVRCA and 4 pin to 2 pin power adapter) when using the Audiovox accessory cable (part number 8010730). Plug in the 3 RCA jacks, white (left audio) to white, red (right audio) to red, and yellow (video) to yellow. Connect the IR jacks. Connect the 4 pin to the 2 pin power adapter, 4 pin to the accessory cable and the plug into the AVD300T power jack. 4.
Figure 5 b. Connect any of the two monitor ports on the back of the DVD player directly to the Movies 2 Go headrest hoods Model MMH56 B/T/G. Power, audio, video and IR signals are supplied through the DIN cable. c. Using the supplied adapter (Part Number DVRCA) the monitor port can be connected to any monitor. 5. Connecting an External Video Source To connect a video game or another audio/video source, plug the A/V output jacks into the matching color-coded A/V input jacks on the front of the DVD player.
1.
2. MENU A DVD is divided into sections called titles and chapters. When you play a DVD, a root menu of the disc will appear on the screen of your TV or Monitor. Contents of the menu will vary depending on the disc content. Press MENU during playback to display the root menu. Some DVDs only allow you to select disc playback options using the DVD root menu. 3. DISPLAY 1). PLAYING TIME AND REMAINING TIME a.
c. Press ‘DISPLAY’ a 3rd time to display the Elapsed Time for the chapter. The heading will disappear automatically in 3 seconds. Chapter Elapsed Time Screen Display d. Press ‘DISPLAY’ a 4th time to display the Remaining Time for the chapter. The heading will disappear automatically in 3 seconds. Chapter Remaining Time Screen Display e. Press ‘DISPLAY’ a 5th time to exit, ‘DISPLAY OFF’ will be displayed and will disappear automatically in 3 seconds. 2).
Angle Screen Display 3). SUBTITLE During disc playback press ‘SUBTITLE’ to select the desired subtitle language* current Subtitle Language Number (1) and the total Number of Subtitle Languages (2) will be displayed. If there are multiple languages press ‘SUBTITLE’ again to select another subtitle language. To turn subtitles OFF, press the ‘SUBTITLE’ button until ‘SUBTITLE OFF’ is displayed. The Subtitle display will disappear automatically if the ‘SUBTITLE’ button is not pressed again within 3 seconds.
4). AUDIO During playback press ‘AUDIO’ to select the desired audio language * current Audio Channel Number (1) and the total number of Audio Channels (2) will be displayed. Press AUDIO again to select another audio language. The audio display will disappear automatically if the ‘AUDIO’ button is not pressed within for 3 seconds. Audio Language Screen Display * Some DVDs will only allow access to this function through the DVD menu. 5).
6). A-B REPEAT a. During playback press ‘A-B’ to set the Starting Point A. A-B Repeat Starting Point Screen Display b. Press ‘A-B’ a second time to set the Ending Point B and the player will repeatedly play the part between Point A and Point B. A-B Repeat Ending Point Screen Display c. Press ‘A-B’ a third time to cancel A-B repeat and resume normal playback.
7). REPEAT a. During playback press ‘REPEAT’ once to repeatedly play the current chapter. Chapter Repeat ON Screen Display b.During playback press ‘REPEAT’ again to repeatedly play the current title. Title Repeat ON Screen Display c. During playback press ‘REPEAT’ a 3rd time to repeat all Chapters and Titles.
d. Press “REPEAT” a 4th time, to resume normal play. Repeat Off Screen Display 4. PLAYING AUDIO CDS When playing an audio CD press the DISPLAY button on the remote to view time information. The options below show you what information is available using this function. 1). The current track and playing time of that track will be displayed on the screen. SINGLE ELAPSED Screen Display 2).
3).Press ‘DISPLAY’ twice and TOTAL ELAPSED appears along with the current track playing and the total time that the CD has been playing. TOTAL ELAPSED Screen Display 4).Press ‘DISPLAY’ three times and TOTAL REMAIN appears along with the current track playing and the amount of time remaining on the CD. TOTAL REMAIN Screen Display 5).Press ‘DISPLAY’ four times and DISPLAY OFF will appear momentarily then disappear. The disc time Information will no longer be displayed.
5. PLAYING MP3 DISCS MP3 is a digital audio format. An audio CD-quality song is compressed into the MP3 format with no significant loss of audio quality. CD-R /RW discs that have been encoded in MP3 format are compatible with this device. Insert an MP3 and the DVD player will initialize the disc and the directory (folder) will be shown on the TV screen. MENU Screen Display When an MP3 disc is inserted into the unit, the menu screen appears automatically.
Use the ( NEXT ) button to move to the next song. Press the (PREVIOUS) button to move to the beginning of the song. USING THE REPEAT FEATURE The default mode for the Repeat feature is OFF. Pressing REPEAT consecutively changes the repeat options: • RANDOM(random play) • SINGLE(play single song only) • REPEAT ONE(repeat playback of a song) • REPEAT FOLDER(repeat playback of a specific folder) • FOLDER (normal playback) Press REPEAT until folder is displayed and the unit will resume normal playback.
6. Playing JPEG file 1) Insert the JPEG Disc into tray. 2) Select JPEG file by pressing “UP/DOWN” button. 3) You can preview the JPEG file by pressing “Play” or “ENTER”. 4) Pressing the left or right button will rotate the JPEG in that direction. 5) When browsing the photos, you can reverse the photo horizontally by pressing “Up” key,or you can reverse the photos vertically by pressing “Down” key. 6) When you browse the JPEG file, press “display”, there will be different refresh mode below. a.
k. Press “display” 11th time, “COMPRESS TO CENTER H” will display on the screen, the picture will refresh from top and bottom to center. l. Press “display” 12th time, “COMPRESS TO CENTER V” will display on the screen, the picture will refresh from right and left to center. m.Press “display” 13th time, “WINDOW H” will display on the screen, the picture will refresh from four window’s top side to bottom side. n.
7. SETUP Press ‘SETUP’ to display the Main screen of the SETUP Menu on the screen. Press ‘SETUP’ again to exit the SETUP Menu and the unit will resume it’s last playback mode. Figure 31. Main SETUP Menu Screen 1) Press “Setup”, the ‘GENERAL SETUP’ will display on screen. a. Select TV DISPLAY using UP/DOWN, and then press RIGHT to enter the submenu. Select the TV display mode on the screen using UP/DOWN, and press ENTER to confirm the setting. Press LEFT to return. Figure 32.
b. Select ‘TV Type’ using UP/DOWN, and then press the RIGHT button to enter the submenu. Choose TV Type using UP/DOWN and then press ENTER to confirm the setting. Press the LEFT button to return. Figure 33. TV Type Screen Display c. Select ‘ANGLE MARK’ using UP/DOWN, and then press the RIGHT button to enter the submenu. Choose Angle Mark on or off displayed on the screen using the UP/DOWN and then press ENTER to confirm the setting. Press the LEFT button to return. Figure 34.
2) When no disc inside the player, select “password” using LEFT/ RIGHT, then press ENTER. Press right to enter the submenu . Figure 42. PASSWORD CHANGE Menu Press ‘ENTER’ to enter the Password Change Page. Input the Old Password or the Default Password, the New Password, and the Confirmed New Password. Press ‘ENTER’ to confirm the change. NOTE: For 1st time use the default password is 3308. Figure 43. PASSWORD VERIFY Input Screen Display NOTE: The Default Password is 3308.
3) When no disc inside the player select “Preference Page” by using LEFT/RIGHT, press ENTER to enter the Preference page. Figure 36. Preference Page Menu Screen a. Select “Audio” using the UP/DOWN buttons, then press right to enter the submenu. You can change the Audio Language by pressing UP/DOWN buttons. After chosing the proper Audio Language, press ENTER or LEFT back to return to the root menu. Figure 37. Preference Audio Language b.
c. Select “Disc Menu” by using the UP/DOWN buttons, then press right to enter the submenu. You can change the Disc Menu Language using the UP/DOWN buttons. Figure 39. Preference Disc Menu Language After choosing the proper “Disc Menu” Setting, press Enter or LEFT return the root Menu. d. Select “Parental” using the UP/DOWN buttons, then press right to enter the submenu. You can change the Parental Rating using the UP/DOWN buttons. Figure 40.
H. Watching TV 1.With power applied to the system, select the TV mode by pressing the DVD/TV/AUX button on the remote control. 2.Press AUTO MEMORY on the remote control to automatically search and store active channels The unit will start to play the first channel automatically. 3. Press CHANNEL UP/DOWN or the number buttons to get to your desired TV channels. I.
90 DAY LIMITED WARRANTY Applies to Audiovox Video Products AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 90 days from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company’s option) without charge for parts and repair labor.
© 2004 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, N.Y.
