Installation Manual

14
WIRING THE AVXMTG13UA VIDEO SYSTEM
1� Make the connections to the vehicle for the 12 pin wiring harness
(P/N 112-4126)�
2� Connect the 2 Pin Power Harness (P/N 112-4129) to vehicle’s
electrical system by tapping into an accessory hot line and a good
ground�
3� To connect an external AV source, utilize the 3�5mm to RCA jack
pigtail harness�
4� To utilize the AV output feature, connect the RCA output connectors
on the 12-pin harness to the input of an optional external monitor�
5� Verify all system functions before nal mounting of the nished
assembly�
A/V Source Denitions:
• AV - Signal Harness to the 3 RCA Jack Pigtail is used for AV
input (P/N 112-4143)�
• DVD - Built in DVD�
• USB - USB Input�
• CARD - SD Card input�
10
AV output
Rear of Unit
Headphone
Jack
(112-4126)
(112-4143)
(112-4129)
Antenna for
Wireless FM Mod.
See Antenna Note
Optional Relay Box
*NOTE: The antenna has been designed for optimal performance. When installing the unit, position the antenna for best reception.