Installation Manual

MATERIALS INCLUDED IN THIS PACKAGE

1� 13�3” LCD Overhead Monitor with DVD player (1 pc)

2� 12 Pin Power Harness (P/N 112-4216) (1 pc)

3� 2 Pin Power / Wire Harness with Choke(P/N 112-4129)(1 pc)

4� Hardware Package (P/N 150-1830) (1 pkg)

a�)M2�6 x 6mm Self-Tapping Screws (P/N 100-2568) (10 pcs)

b�)M4 x 15mm Self-Drilling Screws (P/N 100-2567) (4 pcs)

c�)M5 x 15mm Phillips Screws (P/N 100-2604) (4 pcs)

d�)M5 x 25mm Phillips Screws (P/N 100-2605) (4 pcs)

e�)M5 x 40mm Phillips Screws (P/N 100-2582) (4 pcs)

CAUTION: The 15mm, 25mm and 40mm screws in the

hardware kit are provided to facilitate installation� Use extreme

caution when using these screws to avoid damage to vehicle

roof or other components, wiring, etc�

5� Remote Control (P/N 136-5185) (1 pc)

6� Mounting Bracket (P/N 108-4087) (1 pc)

7� Snap-on Shroud - Pewter (P/N 172-0191) (1 pc)

- Shale (P/N 172-0190) (1 pc)

8� Snap-on Screen Cover - Pewter (P/N 172-0189) (1 pc)

- Shale (P/N 172-0188) (1 pc)

9� Pry Tool (P/N 100-2565) (1 pc)

10� 3�5mm/3RCA Jack pigtail(P/N 112-4143) (1 pc)

11� Trim Ring - Black (P/N 172-0185) (1 pc)

- Pewter (P/N 172-0186) (1 pc)

- Shale (P/N 172-0187) (1 pc)

*Note: The AVXMTG13UA is supplied with a black snap-on shroud and screen cover� To install the pewter or shale snap-on shroud or screen cover, the

black snap-on shroud and screen cover must be removed rst� See the following page for the removal process�

Hardware Package