Installation Manual

MATERIALS INCLUDED IN THIS PACKAGE

1. 13.3” LCD Overhead Monitor with DVD player (1 pc)

2. 12 Pin Power Harness (P/N 112-4216) (1 pc)

3. 2 Pin Power/Wire Harness with Choke (P/N 112-4129) (1 pc)

4. Hardware Package (P/N 150-1830) (1 pkg)

a. M2.6 x 6mm Self-Tapping Screws (P/N 100-2568) (10 pcs)

b. M4 x 15mm Self-Drilling Screws (P/N 100-2567) (4 pcs)

c. M5 x 15mm Phillips Screws (P/N 100-2604) (4 pcs)

d. M5 x 25mm Phillips Screws (P/N 100-2605) (4 pcs)

e. M5 x 40mm Phillips Screws (P/N 100-2582) (4 pcs)

CAUTION: The 15mm, 25mm and 40mm screws in the

hardware kit are provided to facilitate installation. Use extreme

caution when using these screws to avoid damage to vehicle

roof or other components, wiring, etc.

5. Remote Control (P/N 136-5185) (1 pc)

6. Mounting Bracket (P/N 108-4087) (1 pc)

7. Snap-on Shroud - Pewter (P/N 172-0257) (1 pc)

- Shale (P/N 172-0256) (1 pc)

8. Snap-on Screen Cover - Pewter (P/N 172-0189) (1 pc)

- Shale (P/N 172-0188) (1 pc)

9. Pry Tool (P/N 100-2565) (1 pc)

10. 3.5mm/3RCA Jack pigtail (P/N 112-4143) (1 pc)

11. Trim Ring - Black (P/N 172-0185) (1 pc)

- Pewter (P/N 172-0186) (1 pc)

- Shale (P/N 172-0187) (1 pc)

*Note: The AVXMTG13UHD is supplied with a black snap-on shroud and screen cover. To install the pewter or shale snap-on shroud or screen cover, the

black snap-on shroud and screen cover must be removed rst. See the following page for the removal process.

Hardware Package