9-inch Roof-Mount DVD Player With DVD/CD/MP3 System AVXMTG9B/P/S OPERATION MANUAL
This page intentionally left blank.
TABLE OF CONTENTS Important Notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Congratulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Controls and Indicators Diagram . . . . . . . . . . . . . . . . . . . . . 4 Remote Control Operation . . . . . . . . . . . . . . . . . . . . . . . . . . 6 DVD Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMPORTANT NOTICES WARNING An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver only if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is in “park” or when the vehicle's parking brake is applied.
CONGRATULATIONS Congratulations on your purchase of the AUDIOUVOX AVXMTG9B/P/S DVD player with Drop-Down Video/Monitor. The AVXMTG9/B/P/S DVD player has been designed to give you and your family many years of video entertainment in the mobile environment. Please read the directions that follow in order to familiarize yourself with the product to ensure that you obtain the best results from your equipment.
CONTROLS AND INDICATORS DIAGRAM Front View 1. EJECT( ) Button - Press this button to eject discs from the disc compartment. 2. SCREEN MODE ( ) Button - Press this button to select Wide (16:9) or Normal (4:3) aspect ratios. 3. FMM Button - Used to select the frequency in sequence rotation: FM OFF, Ch1 88.1 Mhz , Ch2 88.3 Mhz , Ch3 88.5 Mhz, Ch4 88.7 Mhz , Ch5 88.9 Mhz , Ch6 89.1 Mhz , Ch7 89.3 Mhz , Ch8 89.5 Mhz , Ch9 89.7 Mhz , Ch10 89.9MHz , Ch11 90.1 Mhz , Ch12 90.3 Mhz , Ch13 90.5 Mhz , Ch14 90.
Side Views 1 3 1. DVD disc insertion slot - For loading and removing disks. Unit will turn on and load a disk when a disk is inserted. Insert a disk with the label facing up towards the headliner. 2. Disc indicator light - Illuminates green when a disk is inserted. Illuminates red when a disk is not present. 3. Three Position Dome Light Switch: ON - Turns on the dome lights. OFF - The dome lights will not turn on in this position.
REMOTE CONTROL OPERATION Battery Installation Before attempting to operate your remote control, install the battery as described below: 1. Using your finger, press the tab (1) down in the direction of the arrow. 2. Slide the battery holder (2) out in the direction of the arrow. 3. Install one CR2025 battery. Make sure that the proper polarity (+ or -) is observed. 4. Slide the battery holder into the remote control until it locks.
Remote Control Functional Description 1. 2. POWER ( ) Button - Press this button to turn the unit ON and OFF. NUMBER Buttons - Press to enter the numbers 0 to 9 for selection of CD tracks, DVD chapters or password setting. 3. PREVIOUS / CURSOR ( ) Button - Go to the previous chapter or track. The c ursor is used to select menus on the screen. 4. MENU Button - Press to access the DVD root menu (DVD MODE) . 5. OK Button - Used to implement a selected setting or menu option. 6.
Remote Control Functional Description 11. MUTE Button - Press this button to mute the audio for wireless FMM. 12. DAY/NIGHT Button- This control toggles the unit between “ DAY” and “NIGHT” LCD illumination modes. In the “DAY” mode, the LCD backlight intensity is at maximum . I n the “NIGHT” mode, the LCD backlight is dimmed to a preset level that is more suitable for low light operation. 13 . FMM ON/OFF Button - Turns the wireless FM Modulator on or off. 14.
Remote Control Functional Description 21 . STOP ( ) Button - Pr ess to stop playback. 22 SOURCE Button - Press to select the source menu (DVD/AV 1/SD/USB ) . 23 SCAN FORWARD /CURSOR ( ) Button - Scan forward at 2,4,8,16 times speed. The c ursor is used to s elect menus on the screen. 24. PIC Button - Press this button to enter the picture adjustment mode Press repeatedly to adjust in the following sequence: Brightness, Contrast, Hue, Saturation, Reset.
DVD BASICS To get the optimum use out of the DVD player, please read this section. DVD Region Code The DVD player is preset to a region code at the factory depending on where the unit is sold. DVDs are also coded by region. These region codes must match in order for the disc to play. If the region codes don’t match, the disc won’t play. This system is set to Region 1 (USA) and will not play discs that have a region code different from Region 1. The system will display “WRONG REGION.
Types of Discs Your System Will Play Your system will play the following types of discs: ! DVD disc - DVD discs that contain video. ! Audio discs - Audio CDs that contain musical or sound content only. ! MP3 discs - A disc that contains audio files (for example, a CD-R with downloaded MP3 files). This unit is capable of playing most recordable DVD formats. However, due to the variety of disc manufacturers and software, playback can not be guaranteed for every disc.
LOADING AND PLAYING DISCS 1. Press the Screen Release (PRESS) button to unlock the LCD screen. The LCD screen will drop down slightly. 2. Pivot the screen downward until a conformable viewing angle is reached. The hinge friction will hold the screen in position while the unit is in use. 3. Press the power ( ) button on the unit or remote control to turn the unit on. 4. Insert a disc into the disc insertion slot with the label facing up towards the headliner.
General Setup Page TV Display This function allows you to set the screen display format. Optional Settings: Normal/PS, Normal/LB, Wide The default setting is Wide . Note: This function depends on the aspect ratio with which the DVD disc is recorded. TV Type This function allows you to select TV type. Optional Settings: PAL, NTSC The default setting is NTSC. Note: For best system performance, the selected setting should remain at NTSC.
General Setup Page OSD Language This function allows you to set the OSD menu language. Optional Settings: English, Spanish, French, Italian The default setting is English. Screen Saver This function allows you to turn the screen saver on or off. Optional Settings: On, Off The default setting is On. Note: The DVD player will enter screen saver mode if the unit is inactive for approximately four minutes. Preference Page Audio This function allows an user to select an audio language for DVD playback.
Preference Page Disc Menu This function allows you to choose the menu language stored on the disc. Optional Settings: English, Spanish, French, Italian The default setting is English. Note: This function is only available for DVD playback. Parental This function prevents children from watching unsuitable DVD content. You can limit the content of movie playback from 1. Kid Safe to 8. Adult. The lower the value, the more strict the control.
PLAYING JPG FILES 1. 2. 3. 4. 5. Place a JPG disc into the disc insertion slot, the unit will start reading the disc and play. Press the “MENU” button to browse JPG files. Press the “ ” or “ ” cursor button to select a JPG file and press the “OK” button to confirm. Press the cursor button to rotate the picture counter-clockwise; press the cursor button to rotate the picture clockwise. Press the “DISPLAY” button when viewing pictures. You can select different refresh modes as follows: a.
PLAYING MP3 FILES MP3 is a format for storing digital audio. An audio CD-quality song can be compressed into the MP3 format with very little loss of quality, while taking up much less space. CD-R discs that have been encoded in MP3 format can be played on a DVD player. The DVD player plays the songs in the order they were burned on to the disc. When playback is started, the elapsed time of the track that is playing will be displayed. 1.
SOURCE FEATURES 1. Press the “SOURCE” button on the unit or remote control. The following menu will appear on the screen: DVD AV1 SD USB 2. Press the “ ” or “ ” cursor button to choose an item. 3. Press the “OK” button. DVD If a disc is loaded into the unit when the source is set to AV1, SD or USB, the unit will automatically switch the source over to DVD.
OVERHEAD DOME LIGHTS The Dome Lights integrated into the unit are controlled by a three position slide switch. Sliding the switch to the ON position will turn the light ON. The OFF position will prevent the lights from turning ON with the vehicle interior lighting. The AUTO position will allow the lights to turn ON and OFF with the vehicle interior lighting. Refer to the installation guide for wire connections.
TROUBLE SHOOTING PROBLEM SOLUTION IR remote is inoperative. 1. Verify that the batteries in the remote are fresh. 2. Verify that the infrared remote sensor is not obstructed. Disc will not play or wrong region is displayed. 1 Insert a disc with the label side facing up towards the headliner. 2. Check the type of the disc you put into the disc tray. This DVD only plays DVD, audio CD, JPEG, and MP3. 3. Both the unit and the disc are coded by region.
PROBLEM The icon ( SOLUTION ) appears on screen. The feature or action cannot be completed at this time because: 1. The disc’s software restricts it. 2. The disc’s software doesn’t support the feature (for example, angles). 3. The feature is not available at the moment. 4. You have requested a title or chapter number that is out of the range. No forward or reverse scan. 1. Some discs have sections that prohibit rapid scanning or title and chapter skip. 2.
SPECIFICATIONS Screen Type: Screen Resolution: Operation Temperature: Storage Temperature: Backlight: Power Source: Video Display System: Headphone Audio Output: Video Output: TFT Active Matrix LCD 640 x 220 32 - 122 °F (0 - 50 °C) -4 - 158 °F (-20 - 70 °C) LED 12 VDC NTSC/PAL 5 mw @ 32 ohms 1.
NOTES 23
NOTES 24
12 MONTH LIMITED WARRANTY Applies to Movies To Go Mobile Video Products AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.
© 2010 AUDIOVOX,150 Marcus Blvd.
