AVXMTGHR1M 7” LCD MONITOR FOR REAR SEAT ENTERTAINMENT OPERATION MANUAL / INSTALLATION GUIDE 128-8945B
Important Notice Installation of headrest products require careful planning and preparation. Be extremely careful of seats that have airbags built into them. Keep wiring away from any air bag wiring (usually identified by yellow connectors and yellow wire jackets). Damage to air bag wiring can result in personal injury to vehicle occupants. If you have any questions regarding wire routing or installation in a vehicle, please contact Audiovox Technical Support at 1-800-225-6074.
FEATURES • 7” Digital TFT (Thin Film Transistor) Active Matrix LCD (Liquid Crystal Display) Monitor • OSD (On Screen Display) for control of picture quality and functions • Two Audio / Video Source inputs (AV and AUX).
MATERIAL TO USE IN THIS PACKAGE: 1) AVXMTGHR1M System Monitor (AVXMTGHR1M ) NOTE: The AVXMTGHR1M monitor has been designed to be interchangeable from one headrest to the other. The headrests will still have the Red Din cables on them and should be connected to their respective connectors. The headrest cover from the manufacturer is covered with shale colored vinyl. NOTE: Headrest cable is included with the monitor.
HEADREST COVER REPLACEMENT: NOTE: If desired, replace the headrest cover before installing the headrest in the vehicle. 1. Using a Philips screwdriver, unscrew the two Philips screws and lift the bottom edge of the monitor upward. Unscrew Philips Screws 2. Remove the velcro tabs securing the headrest cover. Remove Velcro Tabs 3. Replace the headrest cover with the desired color and secure the headrest cover by re-attaching the velcro tabs. 4.
VEHICLE PREPARATION 1) Decide on the system configuration and the options that will be installed. 2) Read the manuals and get familiar with the electrical requirements and connections. 3) Decide on the mounting locations and methods of mounting the products that will be connected to the AVXMTGHR1M. 4) Prepare the vehicle by removing any interior trim necessary to gain access to the vehicle's wiring as well as all areas where interconnecting wire harnesses will be located.
AVXMTGHR1M WIRING DIAGRAM Headrest Monitor 12V+VDC Ground Video In Yellow RED (P/N.
CONTROLS AND INDICATORS DIAGRAM (FRONT VIEW) POWER - MUTE SOURCE + VOLUME MENU VOLUME MUTE IR HEADPHONE TRANSMITTER LENS COVER IR SENSOR OPEN AUX IN HEADPHONE JACK REMOTE CONTROL OPERATION NOTE: The remote control has a battery installed with a pull tab to prevent battery discharge. Remove the pull tab before attempting to use the remote. Battery Replacement 1. Remove the battery holder. 2. Insert the battery (CR2025) into the battery holder and insert the battery holder into the remote.
Remote Control Function Description 1 MUTE SOURCE - SYSTEM MENU DISPLAY 2 3 4 5 8 + 7 LEVEL IR ON/OFF 6 1. POWER ( ) Button* Press this button to turn the unit ON and OFF. 2. MUTE Button Press this button to mute all the audio. Pressing the button again restores the sound to the previously set level. 3. SOURCE Button Each time the button is pressed, the audio / video source will change in the following sequence: AV1 > AUX 4.
MENU ADJUSTMENT The System Menu contains features and options that allow you to customize your system. 1) Press the “ ” button on unit or press the TV button and the SYSTEM MENU button on the remote control, the menu display below will appear on screen. 2) Use the “+” “-” buttons to change the setting . 3) To select the next menu press the “ ” button or the SYSTEM MENU button on the remote control. MENU DISPLAY The first adjustment to appear is the volume adjustment.
The IRT can be set to Channel A or Channel B for use with optional wireless headphones. The default channel is Channel B. The IRT function can also be set to off. IRT B The OSD Language feature allows the user to select the language for the on-screen display. The user can either select English, Dutch, French, Spanish, Russian or Chinese for the OSD language. OSD LANGUAGE ENGLISH The RESET function allows all setting options to be reset to factory settings.
Applies to Movies To Go Mobile Video Products AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workman ship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.
NOTES AVXMTGHR1M 13
NOTES 14 AVXMTGHR1M
NOTES AVXMTGHR1M 15
© 2011 Audiovox Electronics Corp.
