Owner`s manual

6
1. Move the ON/OFF switch on the back of the
transmitter to the ON position to turn the
transmitter on.
2. Press the power button on the left headphone to
turn the headphones on.
LINK ON/OFFDC INLINE IN
3. Switch on the audio source (TV, DVD, CD player, etc.) to which the transmitter
is connected. If your audio source is a DVD or CD player, start a disc.
4. Simultaneously press the link buttons on the headphones and on the back of the
transmitter. The headphones and transmitter lock onto each other for wireless
transmission. The LED on the headphones flashes while the devices are tuning;
it stays on once the devices are tuned.
5. Adjust the volume using the volume up and down buttons on the left earphone.
Turning the Headphones Off
power
button
To turn the headphones off: Press and hold the
power button on the headphones for 2 seconds. Don't
forget to switch off the transmitter too!
To make sure that your headphones are ready to use
at all times, plug them in when you're not using them
so that they can recharge.
Using your Headphones
power
button
Resetting the Headphones
If you ever want to return the headphones to their
factory presets, simply reset the headphones by
triggering the reset button on the left headphone with
a paper clip.
Reset
button