AWM930/AWM930W Owner’s Manual HIGH POWER AM/FM STEREO/CD PLAYER DESIGNED SPECIFICALLY FOR THE VAN AND RV INDUSTRIES
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (ON BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash and arrowhead within the triangle is a warning sign alerting you of "dangerous voltage" inside the product. The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IDENTIFICATION OF CONTROLS / CONNECTIONS 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15) 16) 17) 18) 19) 20) 21) 22) 23) 1 Tuning Up / Track Up / Seek / Minute Set Button Tuning Down / Track Down / Seek / Hour Set Button Mute / AS/PS / Loud Buttons Time Set Button Display Window Alarm Set / Alarm On/Off Buttons Button Reset Preset / Repeat Button Preset / Shuffle Button Preset / Scan Button Preset Buttons CD Player CD Eject Button Speaker Selector 1/8” Auxiliary Input Jack Stereo Headphone Jack Audio A
INSTALLATION AND HOOK UP 1) Cut mounting hole in desired location using mounting hole diagram (right) 2) Route power, speaker, and antenna cables through hole, and connect to unit as shown in hook up diagram below. 3) After making sure connections are correct, test unit operation as described in the operation section (Do not mount until AM antenna trimmer adjustment has been made. NOTES: - Speakers must have a minimum of four Ω impedance each. - Either antenna may be used.
OPERATING INSTRUCTIONS NOTE: Number in parenthesis (#) corresponds with “Identification of Controls / Connections” on page 1 of this manual. LIQUID CRYSTAL DISPLAY PANEL The liquid crystal display (LCD) panel displays the frequency, time, and activated functions. Note: It is a characteristic of LCD panels that if subjected to cold temperatures for an extended period of time, they will take longer to illuminate than under normal conditions.
CD CONTROL BUTTONS The RPT button (8) repeats the current track The SHF button (9) randomly shuffles the tracks. The SCN button (10) scans the first 5 seconds of each track. Note: Power can be turned on by pushing any button on the front of the AWM930. AUXILIARY INPUT 1) Push Power Switch (18) “on”. 2) Using the Source Selectors (19), choose the button labeled “AUX”. 3) If there is an external source (ie.
USING THE AUDIO ADJUST BUTTON 1) You can toggle between volume, treble, bass, and balance control by pressing the Audio Adjust button (17). 2) Once at the desired function, you can use the volume knob to adjust. SETTING THE ALARM 1) Hold the Alarm Set button (6). 2) Use the H and M buttons (1 and 2) to adjust hours and minutes. 3) The Alarm On /Off button (6) activates or deactivates the alarm. BEEP FEATURE 1) Hold the Audio Adjust button to enable the beep feature (17).
SPECIFICATIONS Size: Overall Size 10.43” (W) x 7” (H) x 6.25” (D) 265mm (W) x 178mm (H) x 159mm (D) 9.25” (W) x 6.05” (H) x 5.25” (D) 235mm (W) x 154mm (H) x 133mm (D) 11 to 16 Volts DC 50 Watts Total (25 Watts per Channel) 2/4 Speaker and Headphone System Compatible with 4 to 8Ω Speakers, 4Ω load minimum (AM) 530 -1720 KHz (FM) 87.5 – 107.9 MHz (AM) less than 15uv (FM) less than 2.5uv More than 30dB 20 – 20,000 Hz 60dB 70dB 0.
ACCESSORY LIST Description AVT-988 9” Color Television with Remote (12V) AVT-597 5” Color Television with Remote (12V) AVT-1498 13” Color Television with Remote (12V) AVP-7285 Video Cassette Player (12V) Wireless Headphone Kit: Includes 2 Sets Wireless Headphones and Transmitter AVP-7000 Video Cassette Player (12V) BPA-501-12 4 Amp Adapter for use with AVT-988 9” and AVT-1498 13” Televisions AC2A- 2 Amp Adapter for use with AVT-597 5” TV and AVP-7000 Video Cassette Player Unified Remote Control VAC-21- 12
23319 Cooper Drive Elkhart, IN 46514 (219) 264-3135 FAX (219) 264-3007