User manual
12
Note: When playing music on some cell phones, the music will be transmitted to the cell phone’s
speaker instead of the headset. You have to select “transmit the sound via Bluetooth” in the settings
menu and then choose “BT-HP1” as speaker device. The music will then be transmitted to the headset.
Please refer to your cell phone’s documentation further information. If you want to remote control
previous/next track, pause/play, the stereo headset requires your Bluetooth® cell phone or Bluetooth®
transmitter to be paired with the headset and support AVRCP prole. Please refer to your cell phone’s
documentation further information.
Stereo Headset LED Status Indicator
When the stereo headset is connected to a Bluetooth® device the LED will provide the following
status indications on the headset.
LED Indicator Headset Status
LED ashes red and blue alternately Pairing mode
Blue LED ashes once every 3 seconds Not connected to a Bluetooth® device
Blue LED ashes twice every 5 seconds Connected to a HFP device or A2DP device
Blue LED ashes 3 times every 5 seconds Connected simultaneously to a HFP device and
A2DP device
Blue LED ashes twice or 3 times every 5
seconds
Calling in process
Blue LED ashes twice every 4 seconds Incoming call
Blue LED ashes once every 5 seconds Call in process
Red LED ashes twice every 20 seconds Battery charge is low