User manual

13
Stereo Headset Status Tones
When the stereo headset is connected to a Bluetooth® device the LED will provide the following
status indications on the headset.
Tone Headset Status
Two short tones Entering pairing mode
Two tones every 5 seconds Two tones every 5 second during a call
indicates the microphone is muted
Three tones every 20 seconds Battery charge is low
CARE AND MAINTENANCE
The following recommendations will ensure you get the maximum use and enjoyment from your
stereo headset.
• Do not expose the headset to liquid, moisture or high humidity to avoid damaging internal
circuitry.
• Don’t use abrasive cleaning solvents to clean the headset.
• Do not expose the headset to extremely high or low temperature as this can destroy the battery
or distort certain plastic parts.
• Don’t attempt to disassemble the headset.