CDM-9100 for Bell Mobility OWNER’S OPERATING MANUAL 1
AUDIOVOX AUDIOVOX CDM-9100 CDM-9100 Tri-Mode CDMA/AMPS Handheld Portable Cellular Telephone In today’s fast paced world, it has become a necessity to have access to real-time information. Your communications tools must provide you with this access from anywhere at anytime. With that in mind, Audiovox developed the CDM-9100, our next generation tri-mode web browsing wireless handset. The CDM-9100 operates on the 800 MHz Amps/CDMA and 1900 MHz PCS frequencies allowing for seamless nationwide coverage.
TABLE TABLE OF OF CONTENTS CONTENTS SAFETY INSTRUCTIONS ........................................ 7 SAFETY INFORMATION FOR WIRELESS HANDHELD PHONES ........................ 14 SAR Information .................................................... 17 SYSTEM CONFIGURATION ................................... 18 BATTERY INSTALLATION AND RECHARGING .. 19 To Attach the Battery Pack ..................................... 19 To Detach the Battery Pack ................................... 19 To Recharge Battery .........
End to End Signaling .......................................... 31 Touch Tone™ from Display .................................... 31 Touch Tone™ from Memory ................................... 31 Entering Letters and Symbols ........................... 32 T9 Mode T9 (T9) .................................................... 32 Alpha Mode abc (abc) ............................................ 32 Numeric Mode Num (Num) .................................... 33 Symbol Mode Sym (Sym1 to 4) ........................
Messaging Feature Settings .............................. 61 Default Call Back # ................................................ Default Delivery Ack ............................................... New Message Alert ................................................ Voice Mail Alert ...................................................... Text Entry Mode ..................................................... Save Sent Message ............................................... Erase All Text Messages ..............
Call Timers .......................................................... 76 Last Call Timer (F41-1) ........................................... 76 Outgoing Call Timer (F41-2) .................................. 76 All Calls Timer (F41-3) ........................................... 77 Lifetime Timer (F41-4) ............................................ 77 Web Total Timer (F41-5) ........................................ 77 Clock Indicator (F42) ...............................................
SAFETY INSTRUCTIONS WARNING : Always read and understand all of the Warnings and Safety Instructions contained in this Manual before attempting to use this Audiovox CDM9100 Cellular Phone, to help avoid potential hazards that could result in bodily injury or property damage. Always keep this Manual conveniently available for future reference, as it contains important information that will help effect the safe operation and maintenance of this instrument.
Safe Operation of Your Phone WARNING • Never attempt to disassemble the phone or any of its accessories. If service or repair is required, return the unit to an Audiovox authorized service center. If the unit should be disassembled, a risk of electric shock or fire may result. • Always use authorized Audiovox accessories and optional devices when operating this cellular phone, as the use of incompatible auxiliary equipment could result in fire, electric shock or other bodily injury.
Safe Operation of Your Phone (continued) CAUTION • Never expose this phone to high temperatures, such as those found near a heater or in a closed car parked in the sun. This can cause heat-damage to the plastic parts, the electronic components and the battery. • Never drop this phone or subject it to violent impact or shock. This can cause mechanical damage. • Never allow any liquids to spill on this phone or expose it to rain, water or moisture. This can cause corrosion damage.
Safe Operation of Battery Pack WARNING • Never short-circuit a battery pack by either accidentally or intentionally bringing the terminals in contact with another metal object. That could result in burns, other bodily injury or a fire, and could also damage the battery pack. • Never expose the terminals of the battery pack to any other metal object. Always wrap it or place it in a plastic bag, whenever transporting it.
Safe Operation of Battery Pack (continued) WARNING Safe Disposal of Used Battery Packs • Never discard a used battery pack with ordinary solid wastes, since it contains toxic substances. • Always dispose of a used battery pack in accordance with prevailing community regulations relating to the disposal of household toxic wastes. Always cover the metal terminals with insulating tape first, to prevent accidental short-circuiting.
Safe Operation of AC Adapter The AC Adapter and the Desktop Charger that were designed by Audiovox for this unit both require the use of a standard 120 V AC power source for their operation. DANGER • Never attempt to disassemble or repair an AC adapter or desktop charger, as exposure to electric shock hazards may result. Always contact an Audiovox authorized service center, if repair or replacement is required. • Never alter the AC cord or plug on your AC adapter or desktop charger.
Safe Operation of AC Adapter (continued) WARNING • Always unplug the AC adapter or desktop charger from the power source before attempting any cleaning in order to avoid the risk of electric shock. Always use a soft cloth dampened with water to clean the equipment, after it has been unplugged. • Never attempt to use an unauthorized AC adapter or desktop charger with your phone in order to avoid any risk of bodily injury or property damage.
SAFETY SAFETY INFORMATION INFORMATION FOR FOR WIRELESS WIRELESS HANDHELD HANDHELD PHONES PHONES Read this information before using your handheld portable Cellular Telephone. Your wireless handheld portable telephone is a low power radio transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) signals.
Tips on Efficient Operation: For your phone to operate most efficiently: • Extend your antenna fully. • Do not touch the antenna unnecessarily when the phone is in use. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed. DRIVING Check the laws and regulations on the use of wireless telephones in the areas where you drive. Always obey them.
Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if they are adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Turn your phone OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
SAR SAR Information Information THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
SYSTEM SYSTEM CONFIGURATION CONFIGURATION System configuration and the equipment list are as shown below. Retractable Whip Antenna 1 Handheld Portable Telephone 2 Lithium Ion Battery Pack 3 AC Adapter List of Equipment No.
BATTERY BATTERY INSTALLATION INSTALLATION AND AND RECHARGING RECHARGING To Attach the Battery Pack 1. Press and slide the battery cover to remove it. 2. Place the BTR-9100 battery pack in the battery cavity so that it fits over the connector. Connector 3. Slide the cover back to snap it on. To Detach the Battery Pack 1. Press and hold key to turn the phone off. Then press and slide the battery cover to remove it. 2. Lift the battery pack up to take it out.
To Recharge Battery Your CDM-9100 phone has a built-in charger function. To recharge the Battery Pack, always install the Battery Pack to the phone. 1. Attach the BTR-9100 Battery Pack to the phone. 2. If the phone is on with the press and hold indicator displayed, to turn the phone off. 3. Insert the connector of the CNR-9100 AC Adapter to the phone connector. 4. Plug the AC Adapter to AC120V outlet. 5. Then the recharging starts.
To Recharge with Desktop Holder You can also recharge the phone using the CNR-9100 AC Adapter and the optional accessary DTH-9100 Desktop Holder as illustrated below. CDM-9100 AC120V AC Adapter CNR-9100 Desktop Holder DTH-9100 (Option) Battery Information • Temperature extremes will affect the ability of your Battery Pack to charge; always allow it to cool down or warm up first. Never attempt to charge the Battery Pack if the ambient room temperature is below 32°F (0°C) or above 105°F (40°C).
FUNCTIONS FUNCTIONS External View Retractable Whip Antenna Power Indicator Receiving Signal Strength Indicator Earpiece Digital Mode Indicator IN USE Indicator Incoming Call & Charging Indicator Roaming Indicator Message Indicator Vibrating Indicator Battery Level Indicator Soft Key 1 Earphone Mic Jack Tri-Mode Rm ABCDEFGHIJKL MNOPQRSTUVWX YZ1234567890 Graphic Display Send Key Soft Key 2 Message Access Key One-Touch Emergency Key Digit Keys End Key with Power On/Off Rcl F Voice Mail & Speakerp
Function of Keys Digit Keys 1 2ABC 3DEF 4 GHI 5JKL 6 MNO 7PQRS 8TUV 9WXYZ 0 To enter Telephone Numbers. To enter letters and symbols (see page 32). 1 is also used for One-Touch Emergency feature. Function Keys Rcl F Key- Board Arrangement V CLR Soft keys. To function as shown in the bottom line on the display. SEND key. To originate or receive a Call. Rcl F V CLR END key. To terminate a Call and to turn the phone ON/OFF. To recall phone numbers from memory. Also used as Left-arrow key.
GETTING GETTING STARTED STARTED Turning the Phone On/Off Press and hold . All the indicators and the display will light momentarily, and a tone will be heard. The indicator will be displayed while the phone is turned on. To turn the phone off, press and hold . Antenna Position The antenna can be used in its fully extended or fully retracted position only. It is recommended that the antenna should be fully extended for optimum performance and signal strength or while operating in poor signal areas.
BASIC BASIC OPERATION OPERATION Placing Calls To Place a Call 1. Enter the phone number. (A maximum of 32 digits will be displayed.) 123-456-7890 STO Menu . 2. Press Calling... indicator will light. The 123-456-7890 • To Correct a Number Press to clear the last digit. CLR Press and hold to erase all the digits entered. CLR • If the Call Fails to Go Through Press and to redial the number. To Terminate a Call Press . The indicator will go out. Last Number Redial 1.
Speed Dialing If you know the phonebook address of the telephone number that you want to call, you may place a call without using Rcl . 1. Enter the one or two digits of your Phonebook address (1 to 9 or 10 to 99). 2. Press The . The phone number will be displayed. indicator will light, and the call will be placed. Note: If two telephone numbers are stored in the address, the Primary Number will be dialed.
One-Touch Emergency Call This feature permits you to dial an emergency number by a single key stroke, even in the “Phone Lock” or “Restrict” mode. This feature can be turned off to prevent unintentional calls to the emergency number. See To Turn On/Off One-Touch Emergency Call Feature (F63) on page 85. 1. Press and hold 1 for more than 2 seconds. The number in emergency memory location “1” will be dialed. 2. Then the indicator will light, and the call will be placed. (The factory preset number is “911”.
Caller ID with Name This feature allows you to preview in your display the number and name of the party calling you before you answer the call. The name is as you programmed it in your phonebook. 1. When the phone rings, the Incoming Call Calling Number appears in JACK the display. 123-456-7890 2. The last 10 Caller IDs are stored in the memory for your review and redial. See Call History on page 52 for details.
To Mute a Phone Conversation There are two ways to mute the microphone during a call. 1. Press the key under Mute , or press F F . 2. Then the screen displays “Phone is muted!”. 3. To return to normal mode, press the key under Unmute , or press F F again. Note: Terminating a call cancels the muting. Speakerphone Mode (One-Way) This feature allows you to listen to the party or your voice mail through the built-in speaker, while the earpiece and microphone are muted. 1.
Three-Way Calling Your service provider may provide Three-Way Calling service. When a call is already in progress, you may call the third party. 1. Enter a number and press to call the third party. 2. Press again to connect all three parties. Ask your service provider for the detailed information. Standby Indicators on Standby Your phone displays date and time, various settings status, and soft keys in standby. May 21 Mon 3 : 15 pm Redial Web : Ringer Volume is in Silent mode. See page 73.
End to End Signaling To utilize certain phone services, such as accessing an alternate long distance network, signaling a pager or banking by phone etc., Touch Tone™ signaling is required. The following features will make it easy to send frequently used Touch Tone™ signals. See Link Dialing on page 50 for more information. Touch Tone™ from Display When Sending DTMF (page 74) mode is on, the numbers will be sent in Touch Tone™ signals during a call as you press digit keys.
Entering Letters and Symbols The text entry mode T9 or Alpha will automatically be active when necessary to enter letters, such as names or messages. The current mode is displayed as T9 (T9) or abc (abc) at the bottom of the screen. Also numeric or symbol mode will appear by pressing the key under T9 (T9) or abc (abc). Available modes depend on the feature that you use. T9 Mode (T9) T9 The T9 mode allows you to enter text quickly by pressing one key per letter.
Assigned Alpha Characters in Alpha Mode Key 1 2 ABC 3 DEF 4 GHI 5 JKL 6 MNO 7PQRS 8 TUV 9 WXYZ 0 Key 1 2 ABC 3 DEF 4 GHI 5 JKL 6 MNO 7PQRS 8 TUV 9 WXYZ 0 English 1 @ / A B C D E F G H I J K L M N O P Q R T U V W X Y 0 Spanish - : ’ ? . , ( ) ; 2 A Á B C 3 D E É F 4 G H I Í 5 J K L 5 6 M N Ñ O S 7 P Q R S 8 T U Ü Ú Z 9 W X Y Z 0 French 1 @ / A À Â D E Ë G H I J K L M N O P Q R T U Ù W X Y 0 B È Ï 5 Ô S Û Z : C É Î 6 7 V 9 2 3 4 Ó 6 7 V 8 9 Portuguese ’ ? .
PHONEBOOK PHONEBOOK OPERATION OPERATION Your phone has an Enhanced Phonebook with 99 dualnumber memory addresses. At each address, you can store up to two telephone numbers under one name. This feature allows you to store, under one name, a person’s home and office number, office and mobile number, etc. Stored numbers can be easily recalled and dialed by pressing . An e-mail address can also be stored at each memory address. Numbers can also be marked Secret for added privacy.
To Store a Number without Name 1. Press or press and hold CLR to clear the screen, then enter the phone number (up to 32 digits). 2. Press the key under STO three times, then enter the desired memory address (01 through 99). Example: To store the phone number 1 2 3 4 5 6 7 8 9 0 in address 07. 1. Press and hold CLR 2. Enter 1 3 5 JKL 0 2 6 MNO ABC . 4 GHI DEF 7PQRS 8 TUV 9 WXYZ 123-456-7890 . STO 3. Press the key under STO three times. Address: Auto:01 STO 4. Enter an address 0 7PQRS .
Auto Hyphenation With this feature on, hyphens are automatically inserted when you enter telephone numbers and when you recall the numbers from the phonebook. See Auto Hyphenation (F23) on page 72 to activate or deactivate this feature. Length of Number 10 digits or less 11 to 21 digits 22 digits or more Display Example 123-456-7890 1-234-567-89012 No hyphens Note: When you manually insert hyphens, the “Auto Hyphenation” feature will not work for that particular number.
To Store Dual Numbers in Phonebook You can store Dual Numbers with Dual Mark “ \ ” up to 40 digits for the address 01 to 90, and up to 80 digits for the address 91 to 99 in the phonebook. Up to 40 or 80 digits Primary Number \ Secondary Number To store two telephone numbers in one phonebook address, enter the first number, select the Dual Mark “ \ ” by using the menu, then enter the second number.
To Store a Name with the Phone Number To use this procedure, you will need to refer to “Entering Letters and Symbols” on page 32. 1. Enter the phone number. 2. Press the key under STO . 3. Enter the name. 4. Press the key under STO twice, then enter the memory address (01 through 99) to store the number with the name into memory. Example: To store the phone number 1 2 3 4 5 6 7 8 9 0 with the name Jill into memory address 11. 1.
To Store E-mail Address You can store an e-mail address up to 48 characters long with phone numbers in your phonebook. Example: 1. Enter a phone number and Enter E-mail! press the key under STO twice. Enter e-mail address. STO 2. Press the key under STO . abc Address: Auto:02 STO Option 3. Press the key under STO to store it. Note: To add an e-mail address after storing numbers, see “Modify” menu on page 46.
To Store a Ringer Type with the Phone Number (Distinctive Ringing) You can choose one of 15 ringer types for each phonebook number. With this feature, you will be able to distinguish who is calling by hearing the ringing tone. The ringer type is selected under the “Option” menu before storing. Example: 1. Enter phone number(s), Address: Auto:04 and press the key under STO three times. 2. Press F STO and scroll to “Ringer Type”. 3.
Overwrite Warning When you attempt to store a number in an address where another number has already been stored, the “Overwrite” warning will appear on the screen. Example: To store the number 9 8 7 6 5 4 3 2 1 0 in the address 07, where another number 1 2 3 4 5 6 7 8 9 0 is already stored. 1. Enter 9 WXYZ 8 TUV 7PQRS 6 MNO 5 JKL 0 4 GHI 3 DEF 2 ABC 1 987-654-3210 . STO 2. Press the key under STO three times. Address: Auto:05 STO 3. Enter 0 Menu 7PQRS .
Recall Menu Press Rcl . The following “Recall” menu will prompt you to recall the number from memory.
Phonebook Recall To recall the numbers stored in your phonebook, you have three methods: Address Mode, Sort Scroll Mode and Key Word Search Mode. Phonebook Address Mode This mode is useful in finding a phone number by recalling a specific address or by scrolling the phonebook. 1. Press . Rcl Address Search History 2. Enter the two-digit Memory Address. Recall : : 3. The phone number is dis- 27 JACK played. Example: 222-222-2222 E-mail or 4. Press Menu to scroll.
Phonebook Key Word Search Mode This mode searches and displays the character string of Alpha Tags stored in the phonebook. Any part of the Alpha Tag can be used for the search. Example: To search the character string AN stored in the phonebook. 1. Press and press Rcl Recall : :A Address Search History 2 ABC for “A”. ABC 2. Press 6 6 MNO for “N”. MNO Key Word? AN ABC 3. Press F Search . 37 Albany 777-777-7777 E-mail 4. Press . 32 LOUISIANA 888-888-8888 555-555-5555 E-mail . 5.
To Dial Dual Numbers After the number is recalled in the display, it can be . easily called by pressing . • To dial the primary number, just press . • To dial the secondary number, press Primary Number Secondary Number 08 Lucas 123-456-7890 987-654-3210 E-mail Menu To Review Long Names and Numbers This feature allows you to review whole Alpha Name Tags or long numbers stored in your phonebook. 1. Use any of the previously described phonebook search modes to recall a number. 2.
Phonebook Edit This section guides you on how to modify, move, change priority and erase the phonebook contents. To Modify Numbers and Names You can modify any of the phonebook contents you have stored, including Phone Numbers, Names, E-mail Addresses, Icons, Ringer Types, Secret and Phonebook Addresses. To Modify Phone Numbers Recall the number from the phonebook. Press F to select “Menu”, then scroll to “Modify” and press F . Enter the new digit(s) and delete the old digit(s) by pressing CLR .
4. Press the key under Menu and scroll to “Dual Entry”. Menu Link Mark Dual Entry Manual Hyphen OK 5. Press Primary . F The Dual Mark “ \ ” is in- 1 23-456-7890\ STO serted. 6. Enter the second number. Menu Secondary 987-654-3210 STO 7. Press the key under STO three times. Address: Original:12 STO 8. Press the key under STO to store in the original ad- Menu 12 dress. Option Stored 90 Empty 9 Used To Move Numbers and Names You can move the phonebook contents to a new address.
To Change Priority of Dual Numbers You can interchange the primary and the secondary numbers in a phonebook address. The submenu “Priority” will only be available when two telephone numbers are stored in that address. Example: 1. Recall the number. 08 Primary Number Secondary Number 123-456-7890 987-654-3210 E-mail 2. Press Menu and scroll to F Menu Modify Move Priority “Priority”. OK 3. Press . F Priority Change 123-456-7890 987-654-3210 Change 4. Press the key under Change .
Secret Memory To Store a Secret Number This feature permits you to store a phone number or email address that you want to keep secret in your phonebook. The secret number can be accessed only by entering the Security Code (see page 69). Example: To store the phone number 1 2 3 4 5 6 7 8 9 0 in address 30 as a secret number. 1. Enter 1 5 0 6 JKL MNO 2 ABC 3 DEF 4 GHI 7 9 WXYZ PQRS 8 TUV 123-456-7890 . STO 2. Press the key under STO Address: Auto:10 three times. STO 3.
To Recall a Secret Number Example: To recall the number 1 2 3 4 5 6 7 8 9 0 stored in the address 30. 1. Use Phonebook Search 30 Mode to recall a secret number. 2. Press Secret E-mail F . Code Security Code: OK 3. Enter the four-digit security code and press F 30 . 123-456-7890 E-mail Menu Link Dialing This feature permits you to link groups of numbers to be sent in sequence. The linked numbers can be stored in memory.
Example: To link 3 numbers and store in Address 35. 1. Enter the first number. 987-654-3210 STO 2. Press . F Menu Menu Link Mark Dual Entry Manual Hyphen OK 3. Press . F Link01 9 87-654-3210 STO 4. Enter the second number. Menu Link02 456 STO 5. Press F F . Menu Link02 456 STO 6. Enter the third number. Menu Link03 1234567890 STO 7. Press the key under STO 35 three times. Enter an address 3 DEF 5 JKL .
Call History This feature recalls outgoing Call History and incoming Caller ID numbers. This is convenient for redialing recently called numbers or for returning missed calls by using the stored Caller ID. (See Caller ID with Name on page 28.) Call History Memories Memory Outgoing Description Last 10 numbers you dialed. Address 01 to 10. Last 10 numbers you answered or missed. Address 01 to 10. Last 3 numbers you wrote during calls. Address 01 to 03.
To Review Outgoing Call History Example: To recall a number from Outgoing History. 1. Press . Rcl 01 The most recent call is displayed. 123-456-7890 May 21 11:15 am Next 2. Scroll with or Menu to review other numbers. 3. You can place a call by simply pressing . When duplicate numbers are called, only the latest call is stored in the outgoing call history memory. To Review Incoming Call History Example: To recall a received Caller ID from Memory Stack. 1. Press .
To Review Scratch Pad Example: 1. Press and scroll to “History”. Rcl 2. Press F 3. Press F and scroll to “Scratch Pad”. 01 . 123-456-7890 Menu 4. Scroll with or to review other num- bers. . 5. You can place a call by simply pressing To Save a Number to Phonebook The numbers in the Call History and Scratch Pad Memory can be stored in your phonebook. You can add a name in the same way as “Modify”. See To Modify Numbers and Names on page 46. Example: To save a received Caller ID to phonebook. 1.
MESSAGING MESSAGING FEATURES FEATURES Your CDM-9100 Audiovox Cellular Telephone features Two-way Short Message Service (SMS) that sends and receives Text Messages through your phone. The phone also supports Voice Mail Notification. Please note that operation of these features depends on the Cellular System and therefore may not be available in all areas. To inquire about availability or to subscribe to these services, please contact your service provider.
Receiving Text Messages Your phone is able to receive and display a text message of up to 255 characters. The phone saves up to 30 messages in your Inbox. When your phone receives a new text message, the indicator is displayed. The screen displays “New Message” with animation. Depending on the NewMessage 12/30 settings, the phone may also sound a short beep tone. To Check Received Messages 1. Press and hold to open “Inbox”. 2. The Inbox lists the received messages with sender name or number.
Sending Text Messages While operating in the digital mode, your phone is able to send a text message of up to 5 recipients with a cellular phone number or e-mail address. The phone saves up to 30 messages in your Outbox. To Send a Text Message 1. Press and F to en- Send To: (01) Num P-Book ter “Send Message” menu. The “Send To” appears. 2. Enter the cellular phone number or e-mail address. You can also recall it from your phonebook by pressing the key under P-Book . 3. Press the key under OK .
Send-Message Menu • Edit Send To: To correct address. • Edit Text: To correct your message. • Priority: To mark “Urgent” to your message. • Call Back # : To change your call back number temporarily for your current message. • Delivery Ack: To change acknowledgment mode temporarily for your current message. This feature is network dependent, and may not be available in all areas. • Save to Outbox: To save your message as a draft and exit from the messaging feature.
Voice Mail In order to use voice mail, you must first activate your voice mailbox. For information on how to do this, please contact your service provider. Voice Mail Notification The voice mail system sends a notification to your phone when new messages are left in your voice mailbox. Normal Voice Mail Notification Your phone notifies you when new messages are in your voice mailbox. 1. The indicator is displayed. The screen displays “Voice Mail Msg.” with animation.
To Display Number of Voice Mail Messages 1. Press , scroll to “Voice Mail”, and press F . 2. The screen displays the number of messages in Voice Mail Apr 11 10:15 am your voice mailbox. Example: 12 Waiting Option OK to view additional information. 3. Press 4. To erase the voice mail notification, press the key under Option and select “Erase”.
Messaging Feature Settings The following menu allows you to customize your phone’s Text Messages and Voice Mail Notification features. Default Call Back # Enter your callback number as default that will be added to all sending text messages. Your own phone number has been preset to the callback number for your convenience. To change it for an individual message, see Send-Message Menu on page 58.
Voice Mail Alert This feature alerts you when a new voice mail notification is received. Select one of the settings below. • Alert On: Short beep tone sounds once. • Alert Off: Alert does not sound. • Vibrate Only: Vibrating alert only. • Reminder: Short beep tone sounds at every 2 minutes while animation is displayed. Text Entry Mode This feature allows you to select a text entry mode that appears first for entering your message. • T9 Mode: “T9” appears first, then, “Abc”, “Num” and “Sym”.
WEB WEB BROWSING BROWSING Your CDM-9100 Audiovox Cellular Telephone allows you to enjoy accessing various Internet websites directly from your phone, including news, sports, travel, and weather, if you subscribe to Internet service with your service provider. Your phone also supports network services such as e-mailing with the web browser. Please contact your service provider for details of the available services. Accessing Internet Your phone is able to access the Internet while it operindicator.
Browser Menu Press V key while the browser is active to see the browser’s local menu. This menu is displayed Browser Menu 1>Reload 2 Home 3 Bookmarks Back OK in English or French. 1. Reload: To reload the current page. 2. Home: To get back to the Home page. Press and hold CLR will do the same. 3. Bookmarks: To view your bookmark list. 4. Mark Site: To store the current page in your bookmark list. 5. About Openwave: To view the browser version. 6.
Net Alert with Browser The Web Browser is able to receive an alert for a message from your service provider. This is called a Net Alert. To Receive Net Alert 1. When a Net Alert is received, the web browser starts automatically and Message from notifies you on the screen. Example: UP.link. View it now? Skip View 2. Press the key under “View” for accessing your service provider’s home page to view the message. 3. If you select “Skip”, the alert is saved in Alert Inbox for later checking.
Confirm — Connect Prompt You can turn on/off a prompt “Set up Connection?” for accessing the Internet. Connection Settings You should not use the following menus under “Connection” to change any settings in the phone, unless otherwise instructed by your carrier. Altering any of these settings may disable the Web access capability. Your phone can have up to 4 sets of the server IP (Internet Protocol) addresses and Port numbers to access your service provider’s website.
FUNCTION MENU To Access Function Menu Various phone settings can be changed through the Function Menu to customize your phone’s functions to fit your convenience. See Function Menu Tree on the following page. You can reach the Function you want to access in two ways; Scroll and Shortcut. By Scrolling 1. Press to enter Main F Menu. or 2. Scroll with key to the desired item in the Main Menu. 3. Press to enter the F submenu. or 4. Scroll with key to the desired item in the submenu. 5.
Function Menu Tree Main Menu Submenu Branch 1: Lock 1: Keypad Lock 2: Phone Lock 3: Auto Lock 4: Unlock Code (F11) (F12) (F13) (F14) 2: Display 1: My Number 2: Backlight 3: Auto Hyphen 4: Language 5: Contrast 6: Version 7: Last SID 8: PRL ID (F21) (F22) (F23) (F24) (F25) (F26) (F27) (F28) 3: Tones 1: Ring Volume 2: Ringer Type 3: Key Volume 4: DTMF Send 5: Settings (F31) (F32) (F33) (F34) (F35) 1: Key Tone 2: Beep Alert 3: Caller ID 4: Service 5: Voice Privacy 6: Minute 7: Low Battery 4: Times
Lock Features Security Code and Unlock Code Your phone is equipped with the Security Code and the Unlock Code to access various security features. You may change the preset codes for added protection. Code Preset Description Security 1234 To access Secret Number, to set Call Code Restriction, etc. Unlock 1234 To unlock the Phone Code When “Security Code:” is dis- Security Code: played, you need to enter your four-digit security code. OK See To Change the Security Code (F64) on page 85.
Phone Lock (F12) This mode is useful to prevent unauthorized use of the phone. With this feature on, the following functions are still available. • Incoming calls can be answered with . • Muting the ringer or stopping the vibrating with . • Any Key Answering • Programmed Emergency Call • One-Touch Emergency Call • Turning off the phone by . The following functions are not available when this feature is on. • Automatic Answering • Quick Dialing To Activate: 1.
Display Features Own Telephone Number Display (F21) This feature enables you to display your own telephone number and the ID number (SID) of your “Home” Cellular System. 1. Press F 2 ABC 1 2. Press F to exit. . My Number (SIDH) F21 00020 123-456-7890 OK Backlight Control (Standby) (F22-1) The LCD display and keypad are backlighted automatically after Power-On. The backlighting duration can be changed. Three modes are available. 1. Press F 2. Press F 2 ABC 2 ABC . .
Backlight Control (In-Use) (F22-2) For ease of operation, you may select to have the backlight always on while you are engaged in a conversation. When this feature is set to the “Always On” mode, the backlight is turned on as long as the call is connected. 1. Press 2 ABC 2 ABC , and Backlight F 2. Press F 3. Scroll with . or to “Normal” or “Always On”. 4. Press F F222 Control 1:Standby 2:In-Use scroll to “In–Use”. Backlight In-Use Normal Always On F222 to set.
Software Version Review (F26) This feature permits you to review the software version which is installed in your phone. 1. Press F 2. Press F 2 ABC 6 MNO . Version F26 01.23 to exit. OK Last Rescan SID Indicator (F27) This menu item permits you to view the System Identification Number (SID), which your phone is currently using. 1. Press 2. Press F F 2 ABC 7PQRS . Last Rescan F27 SID NID to exit.
Ringer Type Selection (F32) This feature permits you to select a ringer tone pattern from 15 options including melody ringers. 1. Press 3 DEF 2 ABC . F Ringer Type F32 Ringer Ringer 01 02 OK or 2. Press 3. Press to select the ringer tone. to set. F Key Tone Volume Control (F33) 1. Press 3 DEF 3 DEF . F 2. Keep pressing or Key Volume until you achieve the desired sound level, or “Silent” mode. Note: Key tone will be off in Silent mode, but tone will be heard on the other side of the line.
Single Alert Beep Tone (F35-2) This feature is used to signal an incoming call with only a single beep. This feature can only be used with the Silent alert mode. See Ringer Volume Control (F31) on page 73. 1. Press 2 ABC . F 3 DEF 5 JKL and Beep Alert F352 On Off OK 2. You can turn this feature on/off by 3. Press F or . to set. Caller ID Alert (F35-3) This feature audibly alerts you when a Caller ID is received. 1. Press F 3 DEF 5 JKL and Caller ID F353 Alert On Off 3 DEF . OK 2.
One Minute Beep Tone (F35-6) With this feature on, you will be notified during a call, once every minute by a short beep tone. In addition, two beep tones will sound every five minutes. 1. Press F 3 DEF 5 JKL and Minute F356 Alert On Off 6 MNO . OK 2. You can turn this feature on/off by 3. Press F or . to set. Low Battery Alarm (F35-7) When activated, this feature sounds an audible alarm when the battery level is low.
All Calls Timer (F41-3) 1. Press F 4 GHI 1 and 3 talk time of all incoming and outgoing calls will be displayed. Web access call DEF . The cumulative Call Timers F413 1H 23M 45S 3:All Calls 4:Lifetime OK will not be added in this timer. 2. Press F to exit. Note: The above three timers can be reset to zero by using Call Timer Reset (F65-1) on page 85. Lifetime Timer (F41-4) 1. Press F 4 GHI 1 and 4 “lifetime” talk time of all incoming and outgoing calls will be displayed. GHI .
Example: To set the time to 9:15 a.m. Apr. 21, 2001 in Manual mode. 1. Press 4 GHI 3 DEF . F Adjust 2. Scroll to “Manual” and press F . 3. Enter the year 0 month 0 1 4 , time 0 5 JKL and 1 GHI 1 , day 2 , F43 Auto Manual Adjust F43 '01 04/21 09:15am ABC 9 WXYZ 1 STO for a.m. (or 2 ABC for p.m.) 4. Press the key under STO to set. Notes: 1. In step 3 above, you can correct a digit by or , moving the cursor by Rcl or . F 2.
2. The clock alarm does not ring during power off, but this feature will be activated again when you turn the power on. 3. The clock alarm may not ring in Auto mode if you skip the alarm time traveling into an area with the different local time. 4. See Ringer Volume Control (F31) on page 73 to change the alarm sound volume. 5 In place of the alarm sound, you can use Vibrating Alert (F8) on page 88. Countdown Timer (F45) This feature alerts you when the countdown timer expires.
System Features System Mode Selection (F51) This feature permits you to select which Cellular system your phone uses. Leave this setting as it has been preprogrammed unless you have a reason to alter the system selection. To alter the system selection: 1. Press 5 JKL 1 F . The System Mode F51 current mode will be displayed. Automatic Home Only OK 2. You can change the current mode by 3. Press F or . to set.
In areas where your Carrier has Roaming agreements, your phone will display a steady “ Rm ” indication. If your display indicates a flashing “ Rm ”, you are in a cellular system which is not associated with your Carrier (you can still make or receive calls). ”, you may have to If your display indicates a flashing “ change your System Mode Selection or NAM Selection in ”, you order to obtain service. If your display indicates “ are in an area where there is no cellular service.
NAM Name Display (F54-1) You can program a greeting or a name of a maximum 12 characters on your LCD display. This will be displayed when the phone is turned on or when you change the NAM. (See NAM Selection (F52) on page 81.) As you can program a different name for each NAM, you can tell which NAM is currently active when you turn the phone on. 1. Press 1 F 5 JKL 4 GHI and NAM Name F541 Tag 1 2 . 2. You can select other NAM or by Then press NAM Name F541 . F to edit.
Enhanced Voice Privacy Service (F54-4) (Digital Mode Only) This feature requests the cellular system to provide the enhanced voice privacy service. This service can only be provided in the Digital Mode, and its availability depends on the cellular system and your service provider. To Set the Enhanced Voice Privacy Mode: 1. Press F 5 JKL 4 GHI and Voice F544 Privacy Enhanced Standard 4 GHI . OK 2.
Security Features Call Restriction (F61) This feature permits you to impose various kinds of restrictions on outgoing calls. Emergency numbers can be placed even when this feature is on. To Set Call Restriction Mode 1. Press F 6 MNO 1 . 2. Enter the four-digit security code and press F . Restrict Off 11Digits OK or 3. You can select the mode by 4. Press F F61 . to set. The available Restriction modes are as follows: • 11 Digits Mode Only phone numbers of 11 digits or less are accepted.
Note: The emergency number in memory location 1 will be dialed when the One-Touch Emergency Call feature is used. To Turn On/Off One-Touch Emergency Call Feature (F63) 1. Press 6 MNO 3 DEF . F 2. Enter the four-digit security code and press F . 1 Touch Emergency On Off OK or 3. You can turn this feature on/off by 4. Press F F63 . to set. To Change the Security Code (F64) 1. Press 6 MNO 4 GHI . F New Code? F64 2. Enter the four-digit security code and press F 1234 . Set 3.
Call History All Clear (F65-3) This feature clears the call history for outgoing and incoming calls including Caller ID. 1. Press 6 MNO 5 JKL . F 2. Enter the four-digit security code and press 3. Press 3 . . F Reset History Yes No DEF 4. Press F F653 OK to clear the history. Text Message & Voice Mail All Clear (F65-4) This feature clears all Text Messages and the Voice Mail Notification. 1. Press 6 MNO 5 JKL . F 2. Enter the four-digit security code and press . F 3. Press 4 GHI . 4.
Data Communications Data/Fax Mode (F71) Your CDM-9100 will work as a wireless modem, if connected to a PC laptop or a computer with the optional data cable (DIC-9100). When operating in Digital mode, the phone can be used for Async Data or Fax at the speed of up to 14.4kbps. Your CDM-9100 also supports QNC (Quick Network Connection) for faster internet access. The data/fax features are available while the indicator is on. To Receive Data/Fax Call 1. Press F 7PQRS 1 . Data/Fax Mode Off Data F71 OK 2.
Vibrator Vibrating Alert (F8) When this feature is activated, the phone vibrates to alert you of the following items while in standby mode. The audible alerts below will be muted. • Incoming call received, even in Silent mode. • New Text Message received, even in Alert Off mode. • New Voice Mail Notification received, even in Alert Off mode. • Caller ID Alert, if activated. • Service Mode Alert, if activated. • Clock Alarm Alert, if activated. • Countdown Timer Alert, if activated.
Other Functions Quick Dialing (F01) When this feature is on, the primary number in your phonebook address 02 to 09 can be dialed with just a single press of the key. 1. Press 0 F 1 . 2. Scroll to “On” or “Off” and press F . Quick Dialing On Off F01 OK Automatic Answering (F02) With this feature on, incoming calls will be automatically answered after a preset duration of ringer tones. This feature may be convenient when your telephone is installed in the hands-free car kit. 1. Press F 0 2 ABC .
Function Reset Status By Function Reset (F65-5) on page 86, your CDM9100 will be reset as in the chart below.
Function Reset Status (continued) Messaging Feature Settings Functions Default Call Back Number Default Delivery Ack New Message Alert Voice Mail Alert Entry Mode Save Sent Message SMS Lines SMS Memory Management Reset Status Own phone number Enhanced Ack Alert On Alert On T9 Mode Auto Save 4 Lines Auto Delete See page 61 – 62. Web Browser Settings Functions Web Lock Web Backlight Web Idle Timer Connect Prompt See page 65 – 66.
FACEPLATE FACEPLATE OPTIONS OPTIONS Your CDM-9100 phone’s faceplate is available in various color options. Always use and store your phone with the faceplate attached. To Replace Faceplates 1. Turn the phone off and remove 2 Screw the battery pack. Disconnect the phone from the AC Adapter or any other device. 2. Unscrew a screw with a size S Phillips-head screwdriver. The screw stays on the phone. 3. Put a coin in a slot at top of the phone and twist it. 4.
Memo Memo 93
The U.S. Food and Drug Administration’s Center for Devices and Radiological Health Consumer Update on Mobile Phones FDA has been receiving inquiries about the safety of mobile phones, including cellular phones and PCS phones. The following summarizes what is known—and what remains unknown—about whether these products can pose a hazard to health, and what can be done to minimize any potential risk. This information may be used to respond to questions.
1. In a hospital-based, case-control study, researchers looked for an association between mobile phone use and either glioma (a type of brain cancer) or acoustic neuroma (a benign tumor of the nerve sheath). No statistically significant association was found between mobile phone use and acoustic neuroma. There was also no association between mobile phone use and gliomas when all types of types of gliomas were considered together.
2. In a study of 209 brain tumor cases and 425 matched controls, there was no increased risk of brain tumors associated with mobile phone use. When tumors did exist in certain locations, however, they were more likely to be on the side of the head where the mobile phone was used. Because this occurred in only a small number of cases, the increased likelihood was too small to be statistically significant.
At the same time, FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of mobile phone safety to ensure a coordinated effort at the federal level.
OPERATING OPERATING PROCEDURES Never violate any of the following Rules and Regulations of the FCC when using your Cellular Phone. Such violations are punishable by fine, imprisonment or both. • Never use obscene, indecent, or profane language. • Never use your Cellular Phone to send false distress calls. • Never wiretap or otherwise intercept a phone call, unless you have first obtained the consent of the parties participating in the call.
INDEX INDEX A P Alpha Mode ....................... 32 Any Key Answering ......... 27 Automatic Answering ...... 89 Phone Lock ....................... 70 Automatic ....................... 70 Unlock ............................ 70 Phonebook All Clear ......................... 85 Phonebook Edit Change Priority .............. 48 Erase .............................. 48 Modify ............................ 46 Move .............................. 47 Phonebook Entry Automatic Storing ........... 35 Dual Numbers ..
The CDM-9100 is using one or more of the following US patents licensed by QUALCOMM Incorporated: 4,901,307 5,490,165 5,056,109 5,504,773 5,101,501 5,506,865 5,109,390 5,511,073 5,228,054 5,535,239 5,267,261 5,544,196 5,267,262 5,568,483 5,337,338 5,600,754 5,414,796 5,657,420 5,416,797 5,659,569 5,710,784 5,778,338 T9® Text Input is covered by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and other patents pending.
12 MONTH LIMITED WARRANTY WARRANTY AUDIOVOX COMMUNICATIONS CORP.
THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT. The Company disclaims liability for geographic coverage, inadequate signal to antenna, communications range or operation of the Cellular System as a whole. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY.
Quick Reference Basic Operation Turn On/Off Press and hold Place a Call Phone Number, Terminate a Call Receive a Call Any Key (except Clear Last Digit and Rcl F ) CLR Clear All Digits Press and hold Ear/SPK Volume or Speakerphone (One-Way) V CLR during a call during a call Convenience Features Phonebook Dialing Rcl Speed Dialing , Phonebook Address, Phonebook Address, Last Number Redial Rcl Dial last Number Received Rcl Vibrating Alert Press and hold Messaging Features Receive
Functions Mute/Unmute F Keypad Lock F 1 1 Lock the Phone F 1 2 ABC Automatic Lock F 1 3 DEF Display Own Phone Number & SID F 2 ABC 1 Backlight Control F 2 ABC 2 ABC Language Selection F 2 ABC 4 GHI Last Call Time Display F 4 GHI 1 Outgoing Call Time Display F 4 GHI 1 2 ABC All Calls Time Display F 4 GHI 1 3 DEF System Mode Selection F 5 JKL 1 Force Analog Call F 5 JKL 3 DEF Data/Fax Mode F 7PQRS 1 Vibrating Alert F 8 TUV Automatic Answering F 0 F 2 ABC Func
CDM-9100 TRI-MODE CDMA DIGITAL WIRELESS HANDSET with WEB BROWSER ACCESSORIES BTR-9100 Lithium Ion Battery BC-9100 Belt Clip DIC-9100 Data Interface Cable CNR-9100 AC Adapter Charger DTC-9100 Desktop Charger HF-9100 Hands-Free Car Kit CLC-9100 Cigarette Lighter Charger DTH-9100 Desktop Holder LB-9100 Leather Carrying Case EM-425 Earphone Microphone User Changeable Color Faceplates (actual colors may vary) Not Shown: TRC-9100 Travel Charger 105
PROTECT PROTECT YOUR YOUR WARRANTY WARRANTY Carefully read the Limited Warranty for your cellular phone, giving special consideration to paragraph seven. “Warranty does not apply to... any damage that has resulted from the connection to, or use of, any accessories not expressly approved by Audiovox”. Some companies are marketing look-alike accessories that are not compatible for use with your Audiovox product and may damage the unit or cause it to malfunction.
