User Guide

During playback, press EQ button to select different music mode.
Each time the EQ button is pressed, the music mode will be changed
to the next one as follows:
Normal -> Rock -> Classic -> Jazz -> Bass
The Digital Skip Protection System incorporates a special electronic
circuit that prevents sound from skipping when the unit is subject
to shocks and vibration during play.
When the unit receives a physical shock which prevents the laser
pick-up from "reading" the CD, this system immediately starts playing
the sound stored in its memory and continues until the laser pick-up
recovers.
• When you start playback, the ELECTRONIC SKIP PROTECTION
turns on and “ ” is shown on the display and the protection is
activated.
• When turn on the power, the ESP function is automatically activated.
To play MP3-CDs
• This set can read CD, MP3 disc.
1. Place a MP3 CD-ROM with the label side
up, and push the CD centre lightly to set it
in position.
2. Press “ ” to start playback.
The “ ” icon, current album and
track number and its elapsed playing time
appear on the display.
3. Press “ ” button to stop playback.
Searching a track/album
• You can search a track/album in playback mode.
• In stop mode, the total number of files (tracks) and albums appear
on the display.
1. Press “ ” or “ ” to search a track/album.
2. In stop mode, press “ ” to start playback. During playback, it
starts play automatically.
Searching a file
Basically this system supports two kinds of file search mode to
search a file at high-speed.
One is to search a directory level; the other is to search a file
number.
1. Press DIR button to make directory search
mode (default is file search mode). The “
DIR ” icon appears in the left upper corner
of the display.
2. Press “ ” or “ ” to search a directory
and then directory number is displayed.
3. Press DIR button again, the “DIR” icon
disappears. It goes back to the default
mode.
4. Press “ ” or “ ” to search a file and
then the file number is displayed.
Smart find function
1. Press SMART FIND button, and the
directory of the current playing disc
appears on the display. Then press MODE
or “ ” button to select the desired
directory.
2. Press “ ” button and the files of the
selected directory appears on the display.
(Pressing “ ” button will go back to the
directory display.)
3. Press MODE or “ ” button to select the
desired file, then press EQ/ENTER button
to start play.
Printed in China
811-823391-010
During play
The track number of the current selection appears.
When “
” is pressed during play, total number of tracks on the disc
will be displayed and the unit is still on. The unit will be returned to full
stop mode automatically after approximately 60 seconds if no button
is pressed again. Or press “ ” for few seconds to stop the unit.
During pause
The current track will flash.
When no disc is inserted into the player and when “ ” is pressed,
the display window shows “ No Disc”.
The unit can not be operated when the message is displayed. After
approx. 60 seconds the unit will return to full stop mode, or reset the
player by pressing and holding “ ” and then insert a disc to start
playing.
During playback, each time the MODE button is pressed, the mode
will be changed to the next one as follows:
NORMAL play -> ( ) Repeat One -> ( ) Repeat All ->
( )Repeat Dir (for MP3 play mode only) -> (INTRO) Intro
Scan -> Random -> ( ALL )Random All -> Random Dir (for MP3
play mode only) -> Repeat Off
NORMAL Play - Playing the whole disc
The CD is played once from beginning to end.
Repeat Play (Repeat One/Repeat All/Repeat Dir)
• To repeat the same track
Press MODE button during play until
Repeat One “ ” appears in the
display window. Select the desired track
to be played by pressing “ ” or “ ”
button.
• To repeat the whole disc
Press MODE button during play until
Repeat All “ ” appears in the display
window.
• To repeat the directory of MP3 disc
Press MODE button during play until
Repeat Dir “ ” appears in the display
window.
INTRO Play - Playing the First Ten seconds of each track
1. Press MODE button during play until
INTRO appears in the display window.
2. It starts intro play automatically (play each
track for approx 10 second).
• Automatically INTRO play always
starts from the track that immediately
follows the current running one.
• By pressing “ ” or “ ” button,
you may start intro play from the
selected track.
RANDOM Play - Playing the selections in random order
1. To random
Press MODE button during play until
“ Random ” appears in the display
window. After all files are played, the
system will stop automatically.
• To locate the next track: press “ ”.
However, you can not locate a previous
track even if you keep “ ” pressed.
2. To random all
Press MODE during play until
“ Random All ” appears in the display
window. All tracks will play without
sequence repeatedly.
• To locate the next track: press “ ”.
However, you can not locate a previous
track even if you keep “ ” pressed.
3. To random dir (only for MP3 )
Press MODE button during play until
“ Random Dir ” appears in the display
window. It can play all tracks of a directory
on MP3 disc without sequence
repeatedly.
• To locate the next track: press “ ”.
However, you can not locate a previous
track even if you keep “ ” pressed.
NOTES:
• In any play mode, it runs automatically after few seconds without
pressing “ ” button.
• To cancel current play mode
1. Press MODE button during play to change play mode.
2. Press MODE button during play until “Repeat Off ” appears in
the display window. It goes back to normal play.
Program Play - Playing the selections in the desired order
1. During playback, press PROGRAM button
and the “ Cdda ” icon appears on the
display.
2. Press “ ” button and the first two tracks
appears on the display.
3. Press “ ” or MODE button to select the
desired track, then press EQ/ENTER button
to store this track in memory and the “P”
icon will appear on the left of the selected
track.
4. Repeat step 3 to register other tracks.
5. Press PROGRAM button to start play and
PGM icon appears on the display.
6. To stop program play, press “ ” button.
Notes:
• Repeat play can be performed during program play.
• The program is also erased when the disc compartment is opened
or the auto power off function turns the power off.
• To cancel program operation, press “ ” button once.
Pause mode of the first track
DIGITAL SKIP PROTECTION SYSTEM
TROUBLE SHOOTING GUIDE
VARIOUS PLAYING MODES
EQ FUNCTION
MP3 - CD PLAYBACK
Should any problem persists after you have made the following checks,
consult your nearest service facility.
Disc play does not start:
• The disc is inserted upside down or incorrectly. Insert the disc
correctly with the label surface up.
• Dusty or defective disc.
• Dirty or dusty lens.
• The disc compartment lid is not closed.
• Moisture condensation -> Leave the unit in a warm place until the
moisture evaporates.
• The AC power adaptor is not plugged into the wall outlet.
• The unit is not placed on a level surface.
• Weak batteries.
No sound from the headsets:
• The headphones / earphones plug is not firmly connected to the
“ PHONES ” jack .
• Adjust the “ VOL ” control.
• Dirty plug.
Skipping of sound:
• Dirty or defective disc.
• Dirty lens.
• Strong vibration.
When using with batteries the battery life is short:
• Use alkaline batteries and not Manganese batteries.
The unit can not be operated:
• No disc , dirty disc or scratched disc. The unit will return to full stop
mode after approx. 60 seconds, or reset the player by pressing
and holding “ ” down for about 2 seconds and then insert a disc
to start playing.
• When recording on CD-R discs, use 74-minute (650M) discs. Do
NOT use 80-minute (700M) discs.
• The CD-R or CD-RW discs should be “finalized” in computer by
“single section format”.
Cleaning the unit
Do not use volatile chemicals on this unit. Clean by lightly wiping with
a soft cloth.
Cleaning CD
If the CD skips or will not play, the disc may need to be cleaned.
Before playing, wipe the disc from the centre out with a clean cloth.
After playing, store the disc in its case.
Handling the disc
Only touch the CD on the edge to avoid finger prints on its surface.
Do not stick paper or tape, or write anything on the surface.
Power requirements 2 “ AA ” size (LR6 or UM-3) alkaline
batteries, or DC IN 6V,
350mA power adaptor
Polarity of plug
Operating voltage AC100V 50/60Hz (Japan)
AC120V 60Hz (U.S.A, Canada)
AC220-240V 50Hz
(Singapore, Malaysia & Thailand)
AC230V 50Hz (Chile)
AC230V-240V 50Hz (Europe)
AC240V 50Hz (Middle East & Australia)
We continually strive to improve our products, specifications
may change without prior notice.
MAINTENANCE
SPECIFICATIONS