User Guide

ManualsBrandsAudiovox ManualsOtherCE249MP

1. FUNCTION selector

2. VOLUME control

3. PHONE jack

4. Handle

5. CD door

Directory/Preset + button

Directory/Preset – button

8. PROGRAME button

9. PLAY MODE button

AC POWER

You can power your portable stereo system by plugging the detachable

AC power cord into the AC inlet on the back of the unit and into a wall

AC power outlet.

Check that the rated voltage of your unit

matches your local voltage. Make sure that

the AC power cord is fully inserted into the

unit.

Caution: (for North America)

To prevent electrical shock, match wide

blade of plug to wide slot, fully insert.

Note : When not being used on mains the

AC Cord should be unplugged from the unit.

BATTERY POWER

Insert 6 "C" size batteries in the battery compartment. Be sure that the

batteries are inserted correctly to avoid damage to the unit.

• Always remove the batteries when unit will not be used for a long

period of time, as this will cause leakage of the batteries and

subsequently damage to your unit.

• Playback would automatically come to a stop when the batteries

have no more power. Replace all the batteries with new ones.

• Do not mix old and new batteries. Do not mix ALKALINE, standard

(CARBON-ZINC) or rechargeable (NICKEL-CADMIUM) batteries.

To AC inlet

To wall AC outlet

1. Slide the FUNCTION switch to CD, and then " " is shown

on the display.

2. Open the Disc door. Place a CD in the center with the label side up

and then close the Disc door gently. The total number of tracks will

show on the display.

3. Press the PLAY/PAUSE button to start play.

• Adjust the VOLUME.

TO STOP PLAYBACK

• Press the BAND button to stop disc play.

TO INTERRUPT PLAYBACK

• Press the PLAY/PAUSE button while a CD is playing to pause play

(the " " indicator will blink).

• Press the PLAY/PAUSE button again to resume play.

You can listen to your favourite radio stations by sliding the FUNCTION

switch to RADIO, and then

1. Press the BAND button to choose AM(MW) or FM.

2. Press the TUNING or button to choose a desired station.

• Adjust the VOLUME.

TO TUNE FASTER

Hold down the TUNING or button. While the button is being held,

the frequency will change faster.

TO SEARCH FOR A STATION QUICKLY (AUTO Search)

Keep the TUNING or button pressed until the tuner starts searching

for a station. After finding a station the search stops.

To stop the Auto Search manually, press the TUNING or button.

The Auto Search may not stop at stations with very weak signals.

10. DISPLAY

11. SKIP/SEARCH/TUNING

button

12. SKIP/SEARCH/TUNING

button

13. STOP/BAND button

14. PLAY/PAUSE button

15. Telescopic antenna

16. AC socket

POWERING UP

CD PLAYBACK

NAMES OF CONTROLS

RADIO OPERATION

MP3 PLAYBACK

TO PLAY MP3

This set can read MP3.

1. Slide the FUNCTION switch to CD. " " is shown on the

display.

2. Open the Disc door. Place a MP3 disc in the center with the label

side up and then close the Disc door gently. The total number of

albums and the “MP3” indicator appear on the display.

3. Press the PLAY/PAUSE button to start play.

4. Press the BAND button to stop playback.

5. In stop mode, press PLAY/PAUSE button to start playback.

TO SEARCH AN ALBUM

Basically this system supports the album search mode to search an album

at high-speed.

1. Press the DIRECTORY/PRESET +/– button to search a desired album

in play/stop mode.

2. After selected a desired album, the number of this album is displayed

2 seconds, then the number of the first track or the total tracks of this

album is displayed.

- -

-4-

- -

TO REPEAT THE SAME TRACK

• To repeat the same track, press the PLAY MODE button during play

until the " " appears on the display and the “ “ indicator will

blink.

TO REPEAT THE SAME ALBUM

• To repeat the same album, press the PLAY MODE button during play

until " ALBUM " appears on the display.

TO REPEAT THE WHOLE DISC

• Press the PLAY MODE button during play until " " appears on

the display.

TO CANCEL REPEAT PLAY

• Press the PLAY MODE button until the REPEAT indicator is disappear.

RANDOM PLAY - Only in stop mode

• Press the PLAY MODE button in stop mode until “RANDOM” indicator

appears on the display, and then press the PLAY/PAUSE button to

start play. It can play all tracks of a album without sequence.

• To locate the next track: press SKIP/SEARCH button. However,

you can not locate a previous track even if you keep SKIP/SEARCH

button pressed.

PROGRAM PLAY (IN STOP MODE)

1. For CD : Press the PGM button until “MEMORY” and “00” blink on

the display.

For MP3: Press the PGM button until “MEMORY” and “000” blink on

the display.

2. Press DIRECTORY/PRESET button to select an album (in mp3 mode).

3. Press the SKIP/SEARCH or button to select the desired track.

4. Press the PGM button to store a track.

3.0

1.5V 1.5V

PGM (Programe) PLAY

VOLUME

Adjust the VOLUME control of the stereo system to a desired level.

FOR PRIVATE LISTENING

Connect headphones (Ø 3.5 mm stereo mini-plug) to the PHONES

jack.

When headphones are connected, speakers automatically disconnected.

ADJUSTING THE SOUND

TO SEARCH A TRACK

• You can search a track in playback mode.

• In stop mode, the display will show the total number of tracks.

Press either one of the SKIP/SEARCH or button according to the

desired direction to search a track. Each press skips one track. During

play, the first press on the skip backwards

button will go to the beginning

of the current track.

REPEAT PLAY -- In play mode

This function allows one track or all tracks on a disc to be played repeatedly.

TO REPEAT THE SAME TRACK

• Press the PLAY MODE button once during playback, the repeat one

" " indicator will blink.

TO REPEAT THE WHOLE DISC

• Press the PLAY MODE button a second time to repeat all tracks, the

repeat all " " indicator appears on the display.

TO CANCEL REPEAT PLAY

• Press the PLAY MODE button until the “ ” indicator is turned off.

RANDOM PLAY - Only in stop mode

• Press the PLAY MODE button in stop mode until “RANDOM” indicator

appears on the display, and then press the PLAY/PAUSE button to

start play. It can play all tracks without sequence.

• To locate the next track: press SKIP/SEARCH button. However,

you can not locate a previous track even if you keep SKIP/SEARCH

button pressed.

3. Press SKIP/SEARCH or button to search a desired track and then

press the PLAY/PAUSE button to play the track.

4. During searching the album, the album number is shown on the display.

REPEAT PLAY- In play/stop mode

This function allows one track, all tracks or albums on a disc to be played

repeatedly.

5. Repeat steps 2 and 4 until all the desired track are programmed (up to

20 tracks).

6. Press the PLAY/PAUSE button to start play. During program playback,

“MEMORY” indicator will blink.

TO PLAY PROGRAMMED TRACKS

After storing the desired tracks, press the PLAY/PAUSE button to play

the programmed tracks.

TO CHECK THE PROGRAM

Press PGM button during programming before you press PLAY/PAUSE

button.

Each time PGM button is pressed the previously stored track number

appears on the display.

Note : In MP3 mode, will display the album number two seconds, then

display the track number of this album.

TO STOP PROGRAM PLAY

Press the BAND button to stop playback.

TO CLEAR THE PROGRAM

Press the BAND button twice, open the Disc door or slide the

FUNCTION switch to RADIO or OFF to clear the program.