User manual

BASIC FUNCTIONS BASIC FUNCTIONS
C
H
2
Pauses are used for automated systems (i.e., voice mail, calling cards).
Insert a pause after a phone number then enter another group of
numbers. The second set of numbers is dialed automatically after the
pause. This feature is useful for dialing into systems that require a code.
The speaker phone feature lets you listen to audio through the speaker
and talk without holding the phone.
PAUSE FEATURE
1
To insert a pause, enter a phone number then
press [OPTIONS]. Select either a Hard Pause
(“P” appears) or a Timed Pause (“T” appears).
2
Press to dial or to store.
Please refer to page 30 for more details about
storing a phone number.
23
C
H
2
SPEAKER PHONE
1
To activate the speaker phone in idle, answering
or calling modes, press and hold .
2
The phone returns to normal (speaker phone off)
after ending a call or when the phone is turned off
and back on.
22
ANSWERING A CALL
1
To answer a call, press any key except , ,
or .
2
To end the call, press .
In Auto Answer Mode a call is automatically answered after a
preset time of ring tones. See page 90 for more details.
l By pressing , you can select either “Any Key”
or “Talk Key” to answer a call. lf “Talk Key” is selected, the
phone can only be answered by pressing .
See page 89 for more information.
If one of the people you called hangs up during your call, you
and the remaining caller stay connected. If you initiated the call
and are the first to hang up, all three callers are disconnected.
With 3-Way Calling, you can talk to two people at the same time. When
using this feature, the normal airtime rates will be applied for each of the
two calls.
3 WAY CALL FUNCTION
1
Enter the number you wish to call then press .
2
Once you have established the connection,
enter the second number you wish to call then
press .
3
When you’re connected to the second party,
press again to begin your 3-Way call.