Catalog

1
PSB100
4 Sensor System
(Rear Mounted Application Only)
• Four sensors detect obstacles over 4.5 feet away
from the bumper
• Rear mounted application only
• Includes 0°, 4°, 8°, and 16° angle sensor sleeves to fit most
bumpers up to 16°
• Sensors can be flush installed without the sleeves for a more
OEM look in plastic bumpers
• Adjustable buzzer volume and single color red LED warning
module helps with object range notification
• 1 year warranty
• Three detection zones give the following warnings:
1. slow beep within 4.5 – 2.5 feet, slow flashing LED indicator.
2. medium beep within 2.4 – 1.3 feet, medium flashing
LED indicator.
3. steady tone within 1.3 feet, rapid flashing LED indicator.
Ranges are approximate and will vary depending on
installation, weather conditions, and object size and shape.
REAR OBSERVATION SYSTEMS
SPC3
13/16” Hole Saw
• For installing sensors without sensor sleeves
into plastic bumpers
SPC4
26mm* Hole Saw
• 26mm* hole saw for installing sensors with the sensor
sleeves in metal bumpers
*Always use the sensor sleeve for any metal bumper.
SENSORS
ACA240
Wireless Vehicle
Rear Observation System
• Complete wireless vehicle rear observation system
• Includes: camera, monitor, and all required items
to install
• 2.4 GHz wireless transmitter eliminates the need
to run wires through the vehicle.
• Automatically turns on when the vehicle is put
into reverse.
• 110° wide angle camera for better viewing
• New smaller camera bracket won’t hide
registration stickers
• Monitor mounts on dash or windshield
*
Included components
* Included components