Satellite Radio Receiver User Guide

Menu Options/Direct Tune

NOTE: To prevent distortion caused by overdriving the audio playback

device input, it is recommended that you adjust the audio output

level at mid-range (level 3).

Direct Tune

The direct tune menu option, when on or active, allows you to

select and play a desired channel without having to press the

Select button. In the off state, direct tune is disabled; in this mode,

to select and play a channel, the Select button must be pressed

to confirm and play the desired channel. Otherwise, the receiver

will revert to the currently active channel.

Direct Tune On/Off Enable: Upon entering this menu option,

the direct tune screen appears as shown in Figure 19, with

Direct Tune On highlighted. The screen prompts you to rotate

the scroll wheel or press the channel up/down buttons on the

remote control to activate or deactivate the direct tune mode.

Once the desired state is achieved, press the Select button.

Figure 19. Direct Tune Menu Option Display

ROTATE DIAL TO CHANGE

Direct Tune Off

Direct Tune On