Satellite Radio Receiver User Guide

Exit Menu

To exit the menu options mode, rotate the scroll wheel CW, or press

the down button on the remote control to highlight -Exit Menu-. Press

the Select button to confirm the selection.

Preset / Direct (p/d)

The p/d button determines whether the numbered buttons 0 through 9

will operate as a keypad for entering channel numbers directly, or as

presets (A, B, C) used to select and store favorite channels. The unit

informs the operator by displaying the selected mode (PRESET A,

PRESET B, PRESET C, or DIRECT ) in the left corner of the display. The

word PRESET lasts for 2 seconds, leaving only the bank letter; DIRECT,

when selected remains displayed.

Numbered Buttons 0-9: The numbered buttons (0 through 9) pro-

vide the operator with a means of selecting channels by entering the

channel number when the unit is set to DIRECT, or selecting pre-

assigned channels when the unit is set to operate in PRESET (A, B, C).

Direct: When the unit is set to operate in this mode, channel selec

tion can be accomplished by entering its number directly. (e.g., to

select #25, press 25.) The unit will display the following screen and

change to the desired channel 2 seconds later. (See Figure 62.)

Menu Options/Exit Menu/Preset/Direct