Service manual

REVISION A - 4-29-98
B - 5-11-98
THIS INSTRUCTIONS IS PROPRIETARY PROPERTY OF ELECTRO-MOTION INC. ANY INFORMATION CONTAINED HEREIN
IS NOT TO BE USED, COPIED OR RELEASED TO THIRD PARTIES WITHOUT EXPRESS WRITTEN CONSENT OF ELECTRO-MOTION INC.
PAGE 25
ILLUSTRATED GUIDE
for 9000 SYSTEM
1. Disconnect the NEGATIVE (-) battery terminal from the battery
OR Remove both OEM fuses labled "Van Conv Batt" and
"Van Conv Ign" located in the front of the fuse panel under the hood.
2. Wait 10 seconds.
3. Reconnect the NEGATIVE (-) battery terminal to the battery.
Instructions for Resetting the DECC
DODGE