Service manual

52
Soffit, Passenger, Rear
1. Remove window shades per procedures.
2. Remove front soffit.
3. Remove Map light cover and remove exposed screws. Lower light and disconnect
harness.
4. Expose hidden screw on the front and rear of soffit by untucking fabric to expose
screw, remove screw.
5. Remove upper sport top wall wood trim.
6. Gently pull at the top of the soffit to remove soffit from J-channel.
7. Remove all exposed screws and lower soffit.
Soffit, Driver
1. Remove Map light covers and remove exposed screws. Lower light and disconnect
harness.
2. Expose hidden screw on the front and rear of soffit by untucking fabric to expose
screw, remove screw.
3. Remove upper sport top wall wood trim.
4. Gently pull at the top of the soffit to remove soffit from J-channel.
5. Remove window shades.
6. Remove all exposed screws and lower soffit.
TV
1. Remove 4 exposed screws from TV trim ring, remove ring. (Exposes screws in L-
brackets remove screws).
2. Grasp TV and pull outward until connections are exposed.
3. Disconnect all connections, remove TV.
VCP
1. Remove TV (per procedures).
2. Remove VCP box from press fasteners.
3. Remove VCP box through TV opening.
4. Remove VCP from VCP box.
5. Disconnect Electrical connector.
Wall, Driver Side
1. Remove the remote storage from wall, if applicable.
2. Remove Drivers soffit (per procedures).
3. Remove shrouds and shades.
4. Remove mid seat.
5. Remove sofa.
6. Untuck fabric at driver’s doorpost and remove screws.
7. Grab wall at the bottom and tilt out ward. Remove wall.
Wall, Passenger Side
1. Remove Passenger rear soffit (per procedures).
2. Remove shroud.
3. Push the mid seat forward. Remove sofa.
4. Untuck fabric at side cargo door post and remove screws.
5. Expose screws at rear cargo doorpost and remove.
6. Grab wall at the bottom and tilt out ward. Remove wall.