Content A. Introduction ....................................................................... ...... 3 B. Cautons and Warnings ........................................................... 4 C. Package Contents .................................................................. 7 D. Features .................................................................................. 7 E. Powering and Installation .................................................. ...... 7 F. Using the DVD Player Travel Bag ...........
An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is in “park” or when the vehicle’s parking brake is applied.
B. Cautions and Warnings Follow Instructions -- Follow all operating and maintenance instructions and adhere to all warnings. Cleaning -- Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Accessories -- Do not use accessories not recommended in this instruction book as they may be hazardous. Water and Moisture -- Hazard of electric shock. Do not use this product near water or moist environments.
Overloading -- Do not overload wall outlets and extension cords as this can result in risk of fire or electric shock. Servicing -- Do not service this product yourself. Opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Warning A DVD player is a Class 1 laser product. This unit uses a visible laser beam, which could cause hazardous radiation exposure, if the safety interlocks are defeated. Be sure to operate the unit correctly as instructed. The following caution label is located on the rear panel of the player. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Never use this device while driving.
Note: Both the DVD player and discs are coded by region. These region codes must match in order for the disc to play. If the codes do not match, the disc won’t play. This unit’s region code is 1. DVD’s with other region codes cannot be played in this unit. C. Package Contents l 1 x 4.2’’ LCD Monitor & DVD Player l 1 x AC to DC Adapter l 1 x Owner’s Manual l 1 x AV Adapter Cable l 1 x Carry Bag l 1 x DC Power Adapter l 1 x Headphones* P/N 1363688 *Supplied only with Model Number D1420HP D.
Figure 1 Using the battery Remove the AC adapter. Switch the ON/OFF switch to the ON position. If the battery is charged, it will power the unit. 2. Charging A built-in rechargeable battery (Ni-MH) is included for portable use. A fully charged battery will provide about 2 hours of playtime. Note: Charge the battery for at least 8 hours before you use it for the first time. 1) Switch the ON/OFF switch to the OFF position.
F. Using the DVD Player Travel Bag 1. Place the unit into the bag as shown in Figure 2. Close the cover on the bag. Connect the nylon carrying strap to the bag. 2. The front of the bag contains plastic pouches for discs as shown in Figure 3.
G.
H. Control Functions POWER Turns the unit on or off. OPEN Opens the DVD player disc tray to load or remove the disc. PLAY/OK Begin playback or confirm a selected setting. PAUSE Pause playback. NEXT Go to the next chapter, track, or scene during playback. PREVIOUS Go back to the previous chapter, track, or scene during playback. LEFT/RIGHT/UP/DOWN Provides navigation through the menus. OK Select item or confirm setting. MENU Displays the root menu of a disc.
K. Setup Press SETUP to display the main screen of the Setup Menu on the screen. Press SETUP again to exit the Setup Menu, and the unit will resume its last playback mode. Main Setup Menu Screen Note: To use some of the setup menu features, the unit must be in the STOP mode. 1) Press SETUP. The General Setup Page will be displayed on the screen. a) Select TV Display using the UP/DOWN joystick, and then press RIGHT to enter the sub menu.
b) Select Screen Saver mode on or off. Screen Saver Screen On: Enables screen saver Off: Disables screen saver Note: The DVD player will enter the Screen Saver mode after approximately five minutes if the same image remains on the screen. c) Select Last Memory mode On or Off. Last Memory Screen On: The player will return to the last position on the disc. Off: The player will not return to the last position on the disc. Note: The Last Memory function only works when power is on and the disc is not removed.
2) Select the Video Quality. Set Brightness, Contrast, Hue and saturation to the desired levels. Video Quality Setup Screen 3) Select the Password setup page, then input the Old Password or the Default Password and New password as prompted on the screen. Password Change Menu Screen Note: The Default Password is Left, Left, Menu, Right. This password is always effective even after you have selected your own password and changed it.
4) With no disc playing, select Preference to choose Audio language, Subtitle language, Disc Menu language, Parental level and Default setting. Preference setup Note: 1. Language and subtitle selections are available only for discs that are recorded in the languages listed above. If the selected language is not available, the player will play and display on the screen the original language recorded in the disc. 2.
L. Menu When you play a DVD, disc’s main menu will appear on the screen of your TV or Monitor. The contents of the menu vary from disc to disc. Press MENU during playback to display the main menu. Some DVDs only allow you to select disc playback options using the DVD’s main menu. M. Playing Audio CDs When playing an audio CD, the screen will display the elapsed playback time of the current track. Use Pause, Previous, and Next to navigate through the CD. CD Playing Screen N.
When an MP3 disc is inserted into the unit, the menu screen appears. Press the OK/PLAY button to begin playback. You can use the menu screen to change folders and songs. The system will play the songs in the order they were burned onto the disc. 1. Press the up or down button to choose a folder from the folder list on the left side of the screen. 2. Press OK to select the highlighted folder. The songs available under the folder will be listed. 3. Use the up and down buttons to choose a song from the list.
P. Input and Output Connections You can also connect the DVD player to a TV to enjoy high quality stereo audio and video on another monitor. To connect the DVD player to a monitor requires the purchase of an audio/video cable. The cable is readily available at most electronic retailers. The cable consists of three RCA jacks with the colors red and white corresponding to right and left audio channels and the yellow RCA connector is the video signal.
Connect the AV Cable 3.5mm jack into the DVD AV jack. Then, connect the three color-corresponding plugs to the AV Output Jacks on your game/camcorder or other equipment. Q. Specifications Compatible Discs: DVD/CD/MP3 Signal system: NTSC Panel size: 4.2 inch Resolution: 960 (RGB) x 234 Frequency response: 20 Hz to 20 kHz Video output: 1 Vp-p/75 Ohm, unbalanced Audio output: 1.
90 DAY LIMITED WARRANTY Applies to Audiovox Video Products AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 90 days from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.