D1708 PORTABLE 7" LCD MONITOR AND DVD PLAYER 128-6895
A. Introduction Thank you for choosing the 7” portable DVD player. The main features include a 7" Wide Screen (16:9 Aspect Ratio) Liquid Crystal Display (LCD) monitor and a DVD player. The unit applies the latest state of the art electronics and is designed for use in hotels, offices or your home. The unit is constructed to provide years of reliable, trouble-free service, and is compact so that you can take it with you anywhere and is designed for quick and easy installation.
is hazardous to replace the battery incorrectly. Replace the battery only with the same or equivalent type, in order to protect the enviromnent,please dispose the battery properly. Do not use the unit in temperatures higher than 140 degrees Fahrenheit or 40 degrees Celcius. 4.Disassemble Do not attempt to disassemble the cabinet. There is a risk of electric shock and/or exposure to Laser Radiation. Contact qualified service personnel if your system needs repair. 5.
C. Contents 1. 1 x 7’’ LCD Monitor & DVD Player Combo 2. 1 x AC to DC Adapter 3. 1 x Remote Control with battery (CR2025) 4. 1 x Instruction Manual 5. 1 x Audio/Video Cable 6. 1 x Cigarette Lighter Adapter 7. Rechargeable Battery D. Powering and installation 1. Powering the system indoors (Refer to Figure 1) Plug one end of the AC to DC adapter into the DC 9V jack on the left side of the main unit, then plug the other end into the 120V AC power outlet. 2.
1.
2. Remote Control View (Refer to Figure 3) 1) Display Button 2) Angle Button 3) Subtitle Button 4) Audio Button 5) Zoom Button 6) UP/DOWN/LEFT/RIGHT/ ENTER Buttons 7) Return Button 8) A-B Button 9) Forward Button 10) Reverse Button 11) Slow Button 12) Stop Button 13) Numeric Keypad 14) Setup Button 15) Menu Button 16) Repeat Button 17) SKIP18) SKIP+ 19) Play Button Figure 3 20) Pause Button F. Loading and Playing a Disc a. After connecting power to the unit, power on“DVD player” with the power switch.
G. SETUP Press ‘SETUP’ to display the Main screen of the SETUP Menu on the screen. Press ‘SETUP’ again to exit the SETUP Menu and the unit will resume it’s last playback mode. Figure 4. Main SETUP Menu Screen 1) Press “Setup”, the ‘GENERAL SETUP PAGE’ will display on screen. Figure 5. General SETUP Menu Screen a).Select TV DISPLAY using the UP/DOWN buttons, and then press RIGHT to enter the submenu. Select the TV display mode on the screen using UP/DOWN, and press ENTER to confirm the setting.
* NORMAL/PS: When the player is connected to a normal TV, and a wide picture is shown on the full screen. * NORMAL/LB: When the player is connected to a normal TV, and a wide picture is shown on the screen with a black strip at both the top and bottom of the screen. * WIDE: When the player is connected to a wide screen TV, a wide picture is shown on the full screen. Figure 6. TV DISPLAY Screen Display b).Select ‘ANGLE MARK’ using the UP/DOWN butttons, and then press the RIGHT button to enter the submenu.
c). Select ‘SCREEN SAVER’ using the UP/DOWN buttons, Figure 8. SCREEN SAVER Display *ON: enables screen saver *OFF: disables screen saver (off) *NOTE: The DVD player will enter the Screen Saver mode after approximately five minutes if the same image remains on the screen. d). Select “ Last Memory” by UP/DOWN button Figure 9. LAST MEMORY Screen Display *on: The unit will return to the last position on the disc. *off: The unit will not return to the last position on the disc.
a).Select “Brightness by using the UP or DOWN buttons ,then press “Enter”you can change the Brightness by pressing the LEFT or RIGHT buttons. To exit “Brightness Setting”, press “Enter”again to return the main Menu. Figure 11. BRIGHTNESS Screen Display b).Select “Contrast” by using the UP or DOWN buttons,then press “Enter” you can adjust the Contrast by pressing the LEFT or RIGHT butttons. Figure 12. CONTAST Screen Display To exit “Contrast” Setting, press “Enter”again to return to the main Menu. c).
d).Select “Saturation “ by using the UP or DOWN buttons, then press “Enter” you can adjust the Saturation by pressing the LEFT or RIGHT buttons. Figure 14. SATURATION Screen Display To exit “Saturation”Setting,press “Enter”again to return to the main Menu 3).With no disc inside the player ,select “password” using the LEFT or RIGHT buttons, then press the RIGHT button to enter the submenu . Figure 15. PASSWORD CHANGE Menu Press ‘ENTER’ to enter the Password Change Page.
NOTE: The default password is 3308. Figure 17. PASSWORD VERIFY Input Screen Display 4).With no disc inside the player select ‘PREFERENCES’ using the LEFT or RIGHT buttons, then press ‘ENTER’ to enter the preferences page. Figure 18. Preference Audio Language a. Select ‘AUDIO’ using the UP/DOWN buttons, then press ‘RIGHT’ to enter the submenu. Select the audio language you desire using the UP or DOWNbuttons, then press ‘ENTER’ to confirm the setting. Press LEFT to return. b.
c. Select ‘DISC MENU’ using the UP or DOWN buttons, then press ‘RIGHT’ to enter the submenu. Select the Disc Menu Language you desire using the UP or DOWN buttons , then press ‘ENTER’ to confirm the setting. Press ‘LEFT’ to return. Figure 20. Preference DISC MENU LANGUAGE Note: Language and subtitle selection is only available for discs that are recorded in the above listed languages.
e. Select ‘DEFAULTS’ using the UP or DOWN buttons, then press RIGHT to enter the submenu. Press ENTER to make the setting return to the factory-set mode. NOTE: The parental setting is not affected by the default reset function. Figure 22. Loading Factory Setting NOTE: The Default Password is 3308. This password is always effective even after you have selected your own password and changed it.
1.
2. MENU A DVD is divided into sections called titles and chapters. When you play a DVD, a root menu of the disc will appear on the screen of your TV or Monitor. The contents of the menu vary from disc to disc. Press MENU during playback to display the menu. Some DVDs only allow you to select disc playback options using the DVD root menu. 3. DISPLAY (Display contents vary from disc to disc.) 1. PLAYING TIME AND REMAINING TIME a.
c. Press ‘DISPLAY’ a 3rd time to display the Elapsed Time for the chapter. The heading will disappear automatically in 3 seconds. Figure 21. Chapter Elapsed Time Screen Display d. Press ‘DISPLAY’ a 4th time to display the Remaining Time for the chapter. The heading will disappear automatically in 3 seconds. Figure 22. Chapter Remaining Time Screen Display e. Press ‘DISPLAY’ a 5th time to exit, ‘DISPLAY OFF’ will be displayed and will disappear automatically in 3 seconds. 2.
Figure 23. Angle Screen Display 3. SUBTITLE During disc playback press ‘SUBTITLE’ to select the subtitle language you desire*, with the current Subtitle Language Number (1) and the total Number of Subtitle Languages (2) displayed. If there are multiple languages press ‘SUBTITLE’ again to select another subtitle language. To turn subtitles OFF, press the ‘SUBTITLE’ button until ‘SUBTITLE OFF’ is displayed.
4. AUDIO During playback press ‘AUDIO’ to select the audio language you desire*, with the current Audio Channel Number (1) and the total number of Audio Channels (2) displayed. Press AUDIO again to select another audio language. The audio display will disappear automatically if the ‘AUDIO’ button is not pressed within for 3 seconds. Figure 25. Audio Language Screen Display * Some DVDs only allow access to this function through the DVD menu. 5.
6. A-B REPEAT a. During playback press first time ‘A-B’ to set the Starting Point A. Figure 27. A-B Repeat Starting Point Screen Display b.Press ‘A-B’second time to set the Ending Point B and the player will repeatedly play the part between Point A and Point B. Figure 28. A-B Repeat Ending Point Screen Display c. Press A-B a third time to cancel A-B repeat and resume playback. Figure 29.
7. REPEAT a. During playback press ‘REPEAT’ once to repeatedly play the current chapter. Figure 30. Chapter Repeat ON Screen Display b.During playback press ‘REPEAT’ again to repeatedly play the current title. Figure 31. Title Repeat ON Screen Display c. During playback press ‘REPEAT’ a 3rd time to repeat all Chapters and Titles. Figure 32.
d. Press “REPEAT” a 4th time, to resume normal play. Figure 33. Repeat Off ON Screen Display 4. PLAYING AUDIO CDS When playing an audio CD press the DISPLAY button on the remote to view time information. The options below show you what information is available using this function. a. The current track and playing time of that track will be displayed on the screen. Figure 34. SINGLE ELAPSED Screen Display b.
c. Press ‘DISPLAY’ two times and TOTAL ELAPSED appears along with the current track playing and the total time that the CD has been playing. Figure 36. TOTAL ELAPSED Screen Display d. Press ‘DISPLAY’ three times and TOTAL REMAIN appears along with the current track playing and the amount of time remaining on the CD. Figure 37. TOTAL REMAIN Screen Display e. Press ‘DISPLAY’ four times and “ DISPLAY OFF” will appear momentarily then disappear. The CD time Information will not be displayed.
5. PLAYING MP3 DISCS MP3 is a format for storing digital audio. An audio CD-quality song is compressed into the MP3 format with very little loss of audio quality while taking up much less disc space. CD-R /RW discs that have been encoded in MP3 format are compatible with this system.
Use the ( NEXT ) button to move to the next song. Press the (PREVIOUS) button to move to the beginning of the previous song. USING THE REPEAT FEATURE The default mode for the Repeat feature is OFF. Pressing REPEAT consecutively changes the repeat options: • SINGLE • REPEAT ONE • REPEAT FOLDER • FOLDER Pressing REPEAT the 5TH time will resume normal playback. As you toggle through the options, the repeat option changes. The selected repeat option loops repeatedly until you turn it off.
6. Playing JPG file 1) Load the JPG Disc into tray. 2) Select JPG file by pressing “UP/DOWN” button. 3) You can preview the JPG file by pressing “Play” or “ENTER”. 4) Pressing the “Left Key“ will rotate the picture90 degrees counterclocckwise. Pressing the “Right Key“ will rotate the picture clockwise. 5) When browsing the photos, you can reverse the photo horizontally by pressing “Up” key,or you can reverse the photos vertically by pressing “Down” key.
k. Press “display” 11th time, “COMPRESS TO CENTER H” will display on the screen, the picture will refresh from top and bottom to center. l. Press “display” 12th time, “COMPRESS TO CENTER V” will display on the screen, the picture will refresh from right and left to center. m.Press “display” 13th time, “WINDOW H” will display on the screen, the picture will refresh from four window’s top side to bottom side. n.
7. Connecting to a TV or another monitor ( Refer to Figure 39) You can also connect the DVD player to a TV to enjoy high quality stereo sound and picture on another monitor. 1. Connect one end of the audio/video cable’s black (1/8” stereo plug) plug into the unit’s DVD AUDIO OUT jack, and connect the other end to the AUDIO INPUT jacks on your TV or Monitor (white = left channel, red = right channel). 2.
9. Specifications Supported Media formats: DVD/CD/MP3 Color system: NTSC Screen size: 7’’ DVD video format: Horizontal 720 pixel, vertical 480 pixel (NTSC) Frequency response: DVD (PCM 96 kHz/24 bits ): 20 Hz to 44 Hz DVD (PCM 48 kHz): 20 Hz to 22 kHz CD: 20 Hz to 20 kHz Video output: 1.0 Vp-p/75 Ohm, unbalanced Video S/N: Better than 35 dB Audio output: 2 x 0.
battery in optimum condition. Under no circumstances short the battery terminals, store the battery in a metal container, or leave the battery in a humid or damp environment. Ideally, store the battery in an airtight container with desiccant or other dehumidifying agent. Each full recharge takes approximately five-hours and one full charge can provide power to the player for approximately 3 hours. During recharge, the red indicator will stay on. Once fully recharged, the red light will turn off.
Installing the Battery Pack: 1. First, make sure the player is in “Stop” mode and that the AC power supply has been disconnected. 2. Close the player cover. 3. Align the battery pack with the player module’s front edge. 4. Push the battery towards the rear of the player until it locks into position. The lock position is indicated by a click. The unit will fit snugly to the player. 5. Push the battery plug into the DVD player DC input jack. Figure 40.
90 DAY LIMITED WARRANTY Applies to Audiovox Video Products AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 90 days from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.
