D1718 PORTABLE 7" LCD MONITOR AND DVD PLAYER
Notice: This Product incorporates copyright protection technology that is protected by method claims of certain U.S. Patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
A. Introduction Thank you for selecting the D1718 portable DVD player. The main features include a 7" Screen (16:9 Aspect Ratio) Liquid Crystal Display (LCD) monitor and a DVD player. The unit applies the latest state of the art electronics and is designed for use in hotels, offices home or vehicle. The unit is constructed to provide years of reliable, trouble-free service, and is compact so that you can take it with you anywhere and is designed for quick and easy installation.
5. Cleaning Unit When cleaning, make sure the system is unplugged from the power source. Do not use liquid cleaners or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the system only. 6. Disc Do not use irregularly shaped discs such as heart or star-shaped discs as they may cause the unit to malfunction. Do not stick paper, tape or glue on the disc. Do not expose the disc to direct sunlight or heat sources such as hot air ducts. Do not touch the surface of disc.
2. Powering the system in a car Plug one end of the DC power adapter into the DC 9V jack on the unit, then plug the other end into the lighter socket. Figure 1 3. Powering the system with rechargeable Battery Please refer to Rechargeable Battery Installation and Use (Pages 32 and 33).
E. Controls, Indicators, and Connectors 1.
2. Remote Control View (Refer to Figure 3) 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15) 16) 17) 18) 19) Setup Button Up Button Previous Button Enter Button Reverse Scan /Left Button Down Button Numeric Keypad Display Button Zoom Button Subtitle Button Next Button A-B Repeat Button Forward Scan /Right Button 1/All Repeat Button Stop Button Menu Button Audio Button Angle Button Play/Pause Button Figure 3 F. Loading and Playing a Disc a.
G. SETUP Press ‘SETUP’ to display the Main screen of the SETUP Menu on the screen. Press ‘SETUP’ again to exit the SETUP Menu and the unit will resume it’s last playback mode. Figure 4. Main SETUP Menu Screen 1) Press “Setup”, the ‘GENERAL SETUP PAGE’ will display on screen. Figure 5. General SETUP Menu Screen a).Select TV DISPLAY using the DOWN button, and then press RIGHT to enter the submenu. Select the TV display mode on the screen using UP/DOWN, and press ENTER to confirm the setting.
* NORMAL/PS: When the player is connected to a normal TV, and a wide picture is shown on the full screen. * NORMAL/LB: When the player is connected to a normal TV, and a wide picture is shown on the screen with a black strip at both the top and bottom of the screen. * WIDE: When the player is connected to a wide screen TV, a wide picture is shown on the full screen. Figure 6. TV DISPLAY Screen Display b).Select ‘ANGLE MARK’ using the DOWN buttton, and then press the RIGHT button to enter the submenu.
c). Select ‘SCREEN SAVER’ using the DOWN button. Figure 8. SCREEN SAVER Display *ON: enables screen saver *OFF: disables screen saver (off) *NOTE: The DVD player will enter the Screen Saver mode after approximately five minutes if the same image remains on the screen. d). Select “ Last Memory” by using the DOWN button. Figure 9. LAST MEMORY Screen Display *ON: The unit will return to the last position on the disc. *OFF: The unit will not return to the last position on the disc.
a).Select “Brightness by using the UP or DOWN buttons ,then press “Enter”you can change the Brightness by pressing the LEFT or RIGHT buttons. To exit “Brightness Setting”, press “Enter”again to return the main Menu. Figure 11. BRIGHTNESS Screen Display b).Select “Contrast” by using the UP or DOWN buttons,then press “Enter” you can adjust the Contrast by pressing the LEFT or RIGHT butttons. Figure 12. CONTRAST Screen Display To exit “Contrast” Setting, press “Enter”again to return to the main Menu. c).
d).Select “Saturation “ by using the UP or DOWN buttons, then press “Enter” you can adjust the Saturation by pressing the LEFT or RIGHT buttons. Figure 14. SATURATION (Color) Screen Display To exit “Saturation” Setting, press “Enter”again to return to the main Menu 3).With no disc inside the player, select “password” using the LEFT or RIGHT buttons, then press the ENTER button, then press the right button to enter the submenu. Figure 15.
Figure 17. PASSWORD VERIFY Input Screen Display NOTE: The Default Password is 3308. This password is always effective even after you have selected your own password and changed it. To avoid the possibility of others using the default password to set the parental level and change the password, you can record this default password in another area and delete it from this manual. Some discs can be limited depending on the age of users while some discs cannot. 4).
b. Select ‘SUBTITLE’ using the DOWN button, then press RIGHT to enter the submenu. Select the desired subtitle language or SUBTITLE OFF using the UP or DOWN buttons , then press ‘ENTER’ to confirm the setting. Press ‘LEFT’ to return. Figure 19. Preference SUBTITILE LANGUAGE c. Select ‘DISC MENU’ using the DOWN button, then press ‘RIGHT’ to enter the submenu. Select the Disc Menu Language you desire using the UP or DOWN buttons , then press ‘ENTER’ to confirm the setting. Press ‘LEFT’ to return. Figure 20.
d. Select ‘PARENTAL’ using the DOWN button, then press RIGHT to enter the submenu. Figure 21. PARENTAL Preference Screen Display Select the parental level you desire using the UP or DOWN buttons for discs with lock-out function or multiple rating levels. These are listed from the lowest level (1 Kid Safe) to the highest level (Adult). Enter a 4 digit password, then press ‘ENTER’ to confirm the parental level setting. NOTE: The level of 8 Adult is the factory default. e.
1.
2. MENU A DVD is divided into sections called titles and chapters. When you play a DVD, a root menu of the disc will appear on the screen of your TV or Monitor. The contents of the menu vary from disc to disc. Press MENU during playback to display the menu. Some DVDs only allow you to select disc playback options using the DVD root menu. 3. DISPLAY (Display contents vary from disc to disc.) 1. PLAYING TIME AND REMAINING TIME a.
c. Press ‘DISPLAY’ a 3rd time to display the Elapsed Time for the chapter. The heading will disappear automatically in 3 seconds. Figure 25. Chapter Elapsed Time Screen Display d. Press ‘DISPLAY’ a 4th time to display the Remaining Time for the chapter. The heading will disappear automatically in 3 seconds. Figure 26. Chapter Remaining Time Screen Display e. Press ‘DISPLAY’ a 5th time to exit, ‘DISPLAY OFF’ will be displayed and will disappear automatically in 3 seconds. 2.
Figure 27. Angle Screen Display 3. SUBTITLE During disc playback press ‘SUB’ to select the subtitle language you desire*, with the current Subtitle Language Number (1) and the total Number of Subtitle Languages (2) displayed. If there are multiple languages press ‘SUB’ again to select another subtitle language. To turn subtitles OFF, press the ‘SUB’ button until ‘SUB OFF’ is displayed. The Subtitle display will disappear automatically if the ‘SUB’ button is not pressed again within 3 seconds. Figure 28.
4. AUDIO During playback press ‘AUDIO’ to select the audio language you desire*, with the current Audio Channel Number (1) and the total number of Audio Channels (2) displayed. Press AUDIO again to select another audio language. The audio display will disappear automatically if the ‘AUDIO’ button is not pressed within 3 seconds. Figure 29. Audio Language Screen Display * Some DVDs only allow access to this function through the DVD menu. 5.
6. A-B REPEAT a. During playback press ‘A-B’ to set the Starting Point A. Figure 31. A-B Repeat Starting Point Screen Display b.Press ‘A-B’ a second time to set the Ending Point B and the player will repeatedly play the part between Point A and Point B. Figure 32. A-B Repeat Ending Point Screen Display c. Press A-B a third time to cancel A-B repeat and resume playback. Figure 33.
7. REPEAT a. During playback press ‘REPEAT’ once to repeatedly play the current chapter. Figure 34. Chapter Repeat ON Screen Display b.During playback press ‘REPEAT’ again to repeatedly play the current title. Figure 35. Title Repeat ON Screen Display c. During playback press ‘REPEAT’ a 3rd time to repeat all Chapters and Titles. Figure 36.
d. Press “REPEAT” a 4th time, to resume normal play. Figure 37. Repeat Off Screen Display 4. PLAYING AUDIO CDS When playing an audio CD press the DISPLAY button on the remote to view time information. The options below show you what information is available using this function. a. The current track and playing time of that track will be displayed on the screen. Figure 38. SINGLE ELAPSED Screen Display b.
c. Press ‘DISPLAY’ two times and TOTAL ELAPSED appears along with the current track playing and the total time that the CD has been playing. Figure 40. TOTAL ELAPSED Screen Display d. Press ‘DISPLAY’ three times and TOTAL REMAIN appears along with the current track playing and the amount of time remaining on the CD. Figure 41. TOTAL REMAIN Screen Display e. Press ‘DISPLAY’ four times and “ DISPLAY OFF” will appear momentarily then disappear. The CD time Information will not be displayed.
5. PLAYING MP3 DISCS MP3 is a format for storing digital audio. An audio CD-quality song is compressed into the MP3 format with very little loss of audio quality while taking up much less disc space. CD-R /RW discs that have been encoded in MP3 format are compatible with this system.
Use the ( NEXT ) button to move to the next song. Press the (PREVIOUS) button to move to the beginning of the previous song. USING THE REPEAT FEATURE The default mode for the Repeat feature is OFF. Pressing REPEAT consecutively changes the repeat options: • REPEAT ONE • REPEAT FOLDER • REPEAT OFF Pressing REPEAT the 4TH time will resume normal playback. As you toggle through the options, the repeat option changes. The selected repeat option loops repeatedly until you turn it off.
6. Playing JPEG file 1) Load the JPEG Disc into tray. 2) Select JPEG file by pressing “UP/DOWN” button. 3) You can preview the JPEG file by pressing “Play” or “ENTER”. 4) Pressing the “Left Key“ will rotate the picture 90 degrees counterclocckwise. Pressing the “Right Key“ will rotate the picture clockwise. 5) When browsing the photos, you can reverse the photo horizontally by pressing “Up” key,or you can reverse the photos vertically by pressing “Down” key.
k. Press “display” 11th time, “COMPRESS TO CENTER H” will display on the screen, the picture will refresh from top and bottom to center. l. Press “display” 12th time, “COMPRESS TO CENTER V” will display on the screen, the picture will refresh from right and left to center. m. Press “display” 13th time, “WINDOW H” will display on the screen, the picture will refresh from four window’s top side to bottom side. n.
Figure 43 2. AV In Connecting to a Game or Camcorder. ( Refer to Figure 44) a. Slide the AV In/Out switch to In. b. Connect one end of the supplied audio/video adapter cable (1/8”) plug into the unit’s DVD’s AV jack, and connect the other end to the AUDIO OUTPUT jacks on your Game or Camcorder through an optional RCA cable (white = left channel, red = right channel, Yellow = Video).
1) Optional Game Controller ( Refer to Figure 45) Please refer to the operation manual provided with the Game Controller. Figure 45 *Note: Do not use the “AV Jack” and “E Port” at the same time when in “AV IN” mode. Unplug the game controller when using the A/V input jack.
3. Connecting Optional Headphones Simply plug the optional headphones into either Headphone 1 jack or Headphone 2 jack on the right side of the D1718. ( Refer to Figure 46) Figure 46 Plugging into Headphone jack 1 will disable the internal speakers. 9. Specifications Compatible DISC: DVD/CD/MP3 Signal system: NTSC Panel size: 7 inch Frequency response: 20 Hz to 20 kHz Video output: 1 Vp-p/75 Ohm, unbalanced Audio output: 1.
10. Rechargeable Battery Installation and Use The player utilizes a set of long-life Ni-Mh batteries for a portable power supply. Ni-MH batteries feature high storage capacity and low level of degradation. This means the Ni-MH batteries do not have “Memory Effect” and thus can be recharged safely regardless of whether the battery is fully or only partially discharged. Please fully charge the battery prior to first use.
Installing the Battery Pack: 1. First, make sure the player is off and that the AC power supply has been disconnected. 2. Close the player cover. 3. Align the battery pack pins with the holes on the rear of the unit. 4. Push the battery towards the rear of player until it locks into position. The lock position is indicated by a click. The unit will fit snugly to the player. 5. Push the battery plug into the DVD player DC input jack. Figure 47. Installing the Battery Removing the Battery Pack: 1.
90 DAY LIMITED WARRANTY Applies to Audiovox Video Products AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within ninety (90) days from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.
© 2007 Audiovox Electronics Corporation 128-7998
