D1988 PORTABLE 9" LCD MONITOR AND DVD PLAYER WITH BUILT-IN BATTERY
An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is in “park” or when the vehicle’s parking brake is applied.
Content A. Introduction ............................................................................ 4 B. Cautions and Warnings ........................................................ 4 C. Contents ............................................................................... 6 D. Powering and installation ..................................................... 6 E. Controls, Indicators, and Connectors ................................... 7 F. Loading and Playing a Disc .....................................
A. Introduction Thank you for choosing the D1988 portable DVD player. The main features include a 9" wide Screen (16:9 Aspect Ratio) Liquid Crystal Display (LCD) monitor and a DVD player. The unit also contains a 3 in 1 card reader and a USB port. The unit is designed for use with SD/MMC, MS memory cards and USB memory devices. The unit applies the latest state of the art electronics and is designed for use in hotels, offices or your home.
or block the slots and openings with a cloth or other material. Keep the unit away from an open flame such as fire, candle etc. It is hazardous to replace the battery with one that is not designed for the DVD player. Replacement batteries must be the same model in order to prevent damage to the DVD player or the battery. In order to protect the environment, please dispose the battery properly. Do not use the unit in temperatures higher than 95 degrees Fahrenheit or 35 degrees Celsius.
C. Contents 1. 1 x 9’’ LCD Monitor and DVD Player 2. 1 x Remote Control with battery (CR2025) 3. 1 x Audio/Video Adapter Cable 4. 1 x AC to DC Adapter 5. 1 x DC Power Adapter 6. 1 x Instruction Manual D. Powering and installation 1. Powering the system indoors (Refer to Figure 1) Plug one end of the AC to DC adapter into the DC input jack on the left side of the main unit, then plug the other end into the 100~240V AC power receptacle. 2.
E. Controls, Indicators, and Connectors 1.
2. Remote Control (Refer to Figure 3) 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15) 16) 17) 18) 19) Setup Button Up Button Skip - Button Enter Button Reverse/Left Keypad Down Button Numeric Buttons Display Button Zoom Button DVD/SD-USB Button Skip + Button A-B Repeat Button Forward/Right Keypad 1/All Repeat Button Stop Button Menu Button Subtitle Button Audio Button Play/Pause Button Figure 3 F. Loading and Playing a Disc a.
G. Basic Operation POWER OPEN PAUSE STOP Turn the unit on/off Remove/load the disc Press to pause play and again to re-start play.
H. MENU A DVD is divided into sections called titles and chapters. When you play a DVD, a root menu of the disc will appear on the screen of your TV or Monitor. The contents of the menu vary from disc to disc. Press ‘MENU’ during playback to display the menu. Some DVDs only allow you to select disc playback options using the DVD root menu. I. DISPLAY (Display contents vary from disc to disc.) 1. PLAYING TIME AND REMAINING TIME a.
c. Press ‘DISPLAY’ a third time to display the Elapsed Time for the chapter. The heading will disappear automatically in 3 seconds. Chapter Elapsed Time Screen Display d. Press ‘DISPLAY’ a fourth time to display the Remaining Time for the chapter. The heading will disappear automatically in 3 seconds. Chapter Remaining Time Screen Display e. Press ‘DISPLAY’ a fifth time to exit, ‘DISPLAY OFF’ will be displayed and will disappear automatically in 3 seconds.
2. SUBTITLE During disc playback press ‘SUB’ to select the subtitle language you desire*, with the current Subtitle Language Number (1) and the total Number of Subtitle Languages (2) displayed. If there are multiple languages press ‘SUB’ again to select another subtitle language. To turn subtitles OFF, press the ‘SUB’ button until ‘SUB OFF’ is displayed. The Subtitle display will disappear automatically if the ‘SUB’ button is not pressed again within 3 seconds.
3. AUDIO During playback press ‘AUDIO’ to select the audio language you desire*, with the current Audio Channel Number (1) and the total number of Audio Channels (2) displayed. Press AUDIO again to select another audio language. The audio display will disappear automatically if the ‘AUDIO’ button is not pressed within 3 seconds. Audio 1 / 2 : Ac3 5. 1ch Audio Language Screen Display * Some DVDs only allow access to this function through the DVD menu. 4.
5. A-B REPEAT a. During playback press ‘A-B’ to set the Starting Point A. A-B Repeat Starting Point Screen Display b. Press ‘A-B’ a second time to set the Ending Point B and the player will repeatedly play the part between Point A and Point B. A-B Repeat Ending Point Screen Display c. Press A-B a third time to cancel A-B repeat and resume playback.
6. REPEAT a. During playback press ‘1/ALL’ once to repeatedly play the current chapter. Chapter Repeat ON Screen Display b.During playback press ‘1/ALL’ again to repeatedly play the current title. Title Repeat ON Screen Display c. During playback press ‘1/ALL’ a third time to repeat all Chapters and Titles.
d. Press ‘1/ALL’ a fourth time, to resume normal play. Repeat Off Screen Display 7. FORWARD/REVERSE SCAN a. During playback press XX to scan forward at 2x, 4x, 8x,16x, 32x and normal speed. b. During playback press WW to scan forward at 2x, 4x, 8x,16x, 32x and normal speed. J. PLAYING AUDIO CDS When playing an audio CD, press the DISPLAY button repeatedly on the remote control to view disc time information.
1. USING THE REPEAT FEATURE The default mode for the Repeat feature is OFF. Pressing ‘1/ALL’ consecutively changes the repeat options: • Track- repeats the track that is playing. • All- repeats the disc that is playing. • Repeat Off As you toggle through the options, the repeat option changes. The selected repeat option loops repeatedly until you turn it off. 2. A-B REPEAT a. During playback press ‘A-B’ to set the Starting Point A. b.
When an MP3 disc is inserted into the unit, the Menu Screen appears automatically. You can use the Menu Screen to change folders and songs. The system plays the songs in the order they were burned onto the disc. 1. Press the or button to choose a folder from the folder list. 2. Press ENTER to select the highlighted folder. The songs available under the folder will be listed. 3. Use or button to choose a song from the list. Press ENTER to select and begin playback of the highlighted song. 4.
L. Connecting to Other Equipment 1. Connecting to a TV or another monitor ( Refer to Figure 4) a. Set the AV In/Out Switch to the “Out” Position. b. Connect one end of the audio/video cable’s black (1/8” plug) plug into the unit’s DVD AV jack and connect the other end to the AUDIO INPUT jacks on your TV or Monitor using the AV adapter cable (white = left audio channel, red = right audio channel, yellow = video). NOT INCLUDED NOT INCLUDED Figure 4 2. Connecting to a Game or Camcorder (Refer to Figure 4) a.
* * Figure 5 *Plugging into Headphone jack 1 disables the internal speakers. 4. SD/MMC/MS Card and Thumb Drive/Digital Cameras With no disc in the unit, insert either an SD/MMC/MS card, Thumb Drive, or digital camera with JPEG or MP3 files into the appropriate input. 1) Insert an SD/MMC/MS Card into the SD/MMC/MS Slot on the front of the unit. 2) Insert a Thumb Drive into the USB jack on the left side of the unit.
N. SETUP Press ‘SETUP’ to display the Main screen of the SETUP Menu on the screen. Press ‘SETUP’ again to exit the SETUP Menu and the unit will resume it’s last playback mode. 1) Press “Setup”, the ‘GENERAL SETUP PAGE’ will display on screen. Main SETUP Menu Screen a).Select TV DISPLAY using the DOWN button, and then press RIGHT to enter the submenu. Select the TV display mode on the screen using UP/DOWN, and press ENTER to confirm the setting. Press LEFT to return.
b).Select ‘ANGLE MARK’ using the DOWN buttton, and then press the RIGHT button to enter the submenu. Choose Angle Mark on or off using the UP/DOWN buttons and then press ENTER to confirm the setting. Press the LEFT button to return. ANGLE MARK Screen Display * ON: The screen will show the angle mark icon. (*If an angle option is available). * OFF: The screen will not display the Angle Mark icon. NOTE: Not all discs contain above features.
c). Select ‘SCREEN SAVER’ using the DOWN button. SCREEN SAVER Display *ON: enables screen saver *OFF: disables screen saver (off) *NOTE: The DVD player will enter the Screen Saver mode after approximately five minutes if the same image remains on the screen. d). Select “ Last Memory” by using the DOWN button. LAST MEMORY Screen Display *ON: The unit will return to the last position on the disc. *OFF: The unit will not return to the last position on the disc.
2) Select ‘VIDEO’ by using the LEFT/RIGHT buttons, press ‘ENTER’ to enter the VIDEO SETUP PAGE. Video Quality Setup Screen Display a).Select ‘BRIGHTNESS’ by using the UP or DOWN buttons ,then press ‘ENTER’. Adjust the Brightness by pressing the LEFT or RIGHT buttons. To exit Brightness Setting, press ‘ENTER’ again to return to the VIDEO SETUP PAGE. Brightness Screen Display b).Select ‘CONTRAST’ by using the UP or DOWN buttons, then press ‘ENTER’. Adjust the Contrast by pressing the LEFT or RIGHT buttons.
3). Select ‘Password’ using the LEFT or RIGHT buttons, then press the ‘ENTER’ button to enter the submenu. Password Setup Page Screen Display Press ‘ENTER’ twice to enter the PASSWORD CHANGE PAGE. Input the Old Password or the Default Password, the New Password, and the Confirmed New Password. Press ‘ENTER’ to confirm the change. Password Change Page Screen Display NOTE: The Default Password is 3308. This password is always effective even after you have selected your own password and changed it.
4).With no disc inside the player select ‘PREFEREN’ using the LEFT or RIGHT buttons, then press ‘ENTER’ to enter the PREFERENCES PAGE . Preference Page Audio Language a). Select ‘AUDIO’ using the DOWN button, then press ‘ENTER’ to enter the submenu. Select the audio language you desire using the UP or DOWN buttons, then press ‘ENTER’ to confirm the setting. Press LEFT to return.
b). Select ‘SUBTITLE’ using the DOWN button, then press ‘ENTER’ to enter the submenu. Select the desired subtitle language or SUBTITLE OFF using the UP or DOWN buttons, then press ‘ENTER’ to confirm the setting. Press LEFT to return. Preference Subtitle Language c). Select ‘DISC MENU’ using the DOWN button, then press ‘ENTER’ to enter the submenu. Select the Disc Menu Language you desire using the UP or DOWN buttons, then press ‘ENTER’ to confirm the setting. Press LEFT to return.
d). Select ‘PARENTAL’ using the DOWN button, then press ‘ENTER’ to enter the submenu. Parental Preference Screen Display Select the parental level you desire using the UP or DOWN buttons for discs with lock-out function or multiple rating levels. These are listed from the lowest level (1 KID SAFE) to the highest level (ADULT). Enter a 4 digit password, then press ‘ENTER’ to confirm the parental level setting. NOTE: The level of 8 ADULT is the factory default. e).
O. Specifications Compatible DISC: DVD/CD/MP3 Signal system: NTSC Panel size: 9 inch Frequency response: 20 Hz to 20 kHz Video output: 1 Vp-p/75 Ohm, unbalanced Audio output: 1.4Vrms/10kOhm Audio S/N: Better than 60 dB Dynamic range : Better than 85 dB Laser: Semiconductor Laser, Wave Length: 650 nm/795 nm Power source: DC 9-12V Power consumption: 12 W Operating temperature: 41~95°F (5~35°C) Weight : 2.22 lb (1.013 kg) Dimensions (W x D x H): 9.41 X 6.33 X1.
Each full recharge takes approximately five-hours and one full charge can provide power to the player for at least 2.5 hours. During recharge, the red indicator will stay on. Once fully recharged, the LED on the right side of the unit will turn off. At this point you may remove the wall plug and stop charging. Precautions related to Battery Recharge: 1. Once the battery is fully discharged, immediately recharge (regardless of whether you plan to use battery or not) in order to maximize battery life. 2.
Q. Troubleshooting PROBLEM No sound or distorted sound SOLUTION • Make sure your DVD is connected properly. Make sure all cables are securely inserted into the appropriate jacks. Can’t advance through a movie • You can’t advance through the opening credits and warning information that appears at the beginning of movies because the disc is programmed to prohibit that action. The icon ( ) appears on screen The feature or action cannot be completed at this time because: 1.
Troubleshooting (Cont) PROBLEM IR sensor inoperative Disc won’t play Play starts, but then stops immediately SOLUTION • Verify that the batteries in the remote are fresh. • Verify that the remote sensor eye is not obstructed. • Insert a disc with the label side facing up. • Check the type of disc you put into disc tray. This DVD only plays digital video discs, audio CDs and MP3s. • Both the unit and the disc are coded by region. If the regional codes don’t match, the disc can’t be played.
90 DAY LIMITED WARRANTY Applies to Audiovox Video Products AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 90 days from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.
© 2008 Audiovox Electronics Corporation 128-8386
