Model D2010 PORTABLE DVD PLAYER WITH 10.
Introduction Thank you for choosing the D2010 portable DVD Player. The unit applies the latest state of the art electronics and is designed for use in hotels, offices, vehicles or your home. The D2010 Player is constructed to provide years of reliable, trouble-free service, and is compact so that you can take it with you anywhere and is designed for quick and easy setup. Please read all documentation prior to using this product. The documentation will assist you in obtaining the best equipment performance.
-2-
Cautions and Warnings The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “Dangerous Voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Cautions and Warnings When you move it from a cold location to a warm location, wait for about one hour before operating the DVD Player, or remove the disc and leave the DVD Player turned ON until the moisture evaporates. 5. Caution Do not spill or spray liquid of any kind on or in the system (this may result in a fire or electric shock). Do not place anything heavy on the DVD Player.
Table Of Contents Introduction---------------------------------------------------------------------------------------------- 1 Cautions and Warnings------------------------------------------------------------------------------ 2 Table of Contents--------------------------------------------------------------------------------------- 4 Main Features--------------------------------------------------------------------------------------------5 Screen and System Panel Controls------------------------------------
Main Features High Quality Audio and Video Advanced Playing Function LCD (Liquid Crystal Display) Screen 10.2” Color LCD screen. Special Functions Supports Multi-angle, Multi-language and Parental-lock features. AV Input An external Audio/Video signal input can be connected to the AV input jacks. Compatibility Plays: DVD, DVD-R, CD, CD-R, CD-RW and JPEG discs are compatible. ON-Screen Display ON-screen displays in your choice of English /Spanish/French.
Screen and System Panel Controls Front Panel Controls 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. OPEN button Press to open the disc tray cover. Disc Tray Cover When the disc is loaded gently press the cover to close it. PLAY button Press to begin playback. Remote Sensor IR receiver for remote control operation. STOP button Press to stop playback. Power Indicator Lights green when the player is on. PAUSE button Press once to pause playback. Press again to activate step frame by frame playback.
System Side Panel Controls 22. MODE button Press to change the aspect ratio from 4:3, 16:9 and zoom modes. 23. Charge Indicator When charging the battery pack, the light on the control panel will turn red. When the battery is fully charged the light will go OFF 21. PICTURE button Press to enter the brightness, color or contrast adjustment mode. Infrared headphone emitter power ON or OFF, and selecting the LCD display ON or OFF. Right Side Panel Controls 1.
Remote Control Remote Control 5. ENTER button Press to confirm the selected menu items or settings. 1. PWR button Press to turn the unit ON or OFF. 2. INFO button Press to display detailed playback information. Keep pressing the button to display additional information or to turn the information display OFF. 6. SETUP button Press to access the DVD player’s setup menu. 7. Number buttons (0-9) Press to select Password Numbers or go to a specific Track or Time on a disc. (GOTO Function) 3.
Remote Control 9. NEXT button Press to go to next Track or Chapter. 17. STOP button Press once to stop playback. Press the PLAY/PAUSE button to resume normal playback. Press the button 10. SUBT button When a DVD with subtitles is twice to stop playback completely. playing, press to select a subtitle 18. PLAY/PAUSE button Press to start or pause playback. language or to turn subtitles OFF. 11. Angle button Press to access various camera angles, if the DVD disc contains multiple camera angles. 19.
System Connections Note: Before plugging the power cord into an AC outlet, make sure that all other connections have been made as described below. Power Supply Connection Connect the supplied adapter to the side of the DVD player in the jack marked “DC 12V IN”. Plug the two-prong end of the power cord to an AC100-240V outlet. If you have difficulty inserting the plug, turn it over and reinsert it. If the DVD Player will not be used for a long time, disconnect the plug from the outlet.
System Connections Connecting to an Amplifier The DVD player can be connected to an amplifier. Plug the supplied A/V cable into the audio jack on the right side of the unit and plug the other end into an audio input on the amplifier (White= left, Red=Right). Please refer to the equipment’s manual before connecting.
System Preparations Using of Remote Control 1. Remove the battery holder. Refer to the figure above. 2. Insert the battery into the battery holder (observe correct polarity) and insert the battery holder into the remote. 3. For best results, aim the remote directly at the player’s IR receiver window, within 15 feet, and angles not exceeding 60 degrees. The path between the remote control and remote sensor should be free of obstructions. 4.
System Preparations Disc Formats Supported By This Player DISC LOGO DIAMETER PLAYBACK TIME/ PLAYABLE SIDES 133 min (SS-SL) 12cm DVD DVD-R 242 min (SS-DL) 266 min (DS-SL) 484 min (DS-DL) 41 min (SS-SL) 8cm 75 min (SS-DL) 82 min (DS-SL) 150 min (DS-DL) CD CD-R CD-RW 12cm 74 min 8cm 20 min The disc maker specifies the operation of some DVD discs. instruction manual with the disc. Please refer to the Care of Discs Cleaning of Discs Do not touch the playing surface of the disc.
Power Supply Rechargeable Battery Pack Your portable DVD player comes with a lithium ion rechargeable battery that attaches to the rear of the DVD player. Charge the battery fully before initial use. Charging time is normally about 5 hours. A fully charged battery delivers about 2-1/2 to 3 hours of use, but playing time varies from disc to disc. If the battery will not be used for a long period of time, fully charge the battery prior to storage.
Power Supply Attaching the Battery Pack Refer to the following steps for attaching the Battery Pack: 1. Place the DVD Player on a soft and smooth surface with the bottom of the unit facing UP (chassis up see the Fig.1). 2. With one hand on the DVD Player to prevent it from moving, take the battery and align the four (4) plastic tabs on the battery pack with holes on the player, and push the battery pack into the DVD Player. (see the Fig.1). 3.
Power Supply Detaching the Battery Pack If the DVD Player is not going to be used for long periods of time, the battery pack should first be fully charged and the Battery Pack should be detached. When the DVD Player is turned OFF, the DVD Player is still consuming some power in STANDBY mode. This will eventually discharge the battery. Make sure the power is turned OFF before detaching the Battery Pack. 1. Place the player on a soft and smooth surface with the bottom of the unit facing 2.
Power Supply Using the DC Adapter To use the supplied Vehicle DC Adapter, disconnect the Battery pack and connect the Vehicle Power Plug Adapter into the DVD Player’s Power Jack and the other end into the Vehicle DC outlet (Cigarette Lighter Socket) as shown below. Vehicle Power Plug Quick Tips: • Do not operate the unit while driving a vehicle. • Place the unit in a secure position for viewing. • Do not leave battery attached when using car adaptor as power source.
Installing The System Onto Vehicle Seat Back 1. 2. 3. Take one of the supplied straps from the carrier bag. Connect the latch to one of the upper metal rings on the mounting bag. Connect the “S” hook to the other upper metal ring and place the loop over the headrest. Adjust the strap until the bag is firmly secured. Take another strap from the carrier bag, and connect the latch to the lower metal ring on the left side of the bag.
Installing The System Between Vehicle Seats 1. 2. 3. Take one strap and connect the latch to the upper metal ring on the left side of the bag. Attach the “S” hook to the same ring after looping the strap around the headrest of the driver’s seat. Repeat this process for the right side (Passenger Seat). Take another strap and connect the latch to lower metal ring on the left side of the bag. Attach the “S” hook to the same ring after looping the strap around the driver’s seat rail.
Using Headphones Using Wired Headphone Connect headphones into the headphone Jack on the left or right side of the unit. Quick Tips: Excessively loud volume could damage your hearing. Turn down the volume before you connect the headphones, and then raise the volume to a comfortable level. Sound from the DVD Player’s external speaker will stop when headphones are connected. Using Wireless Headphone (Optional) 1.
DVD Player Operation Preparation 1. Turn on the player’s power by switching the POWER switch on the side of the player to “ON”. 2. Unlatch the LCD panel and lift it up. 3. Press the OPEN button on front panel to open the disc cover. 4. Load disc with the label facing up. 5. Close the disc tray cover, pressing the area of the disc cover that says “Press”. The player will automatically search for the disc and start playback.
System Setup You can customize the set up menu to your own preference. Press the “SETUP” button on the remote control to display the setup menu. The menu will include “General Setup”, “Speaker Setup”, “Dolby Digital Setup”, “Video Setup”, and “Preference Setup”. Press the direction button ( ) on the remote control to select a category. All the items in the category will appear on the screen. Press the “ENTER” button to enter the category.
System Setup Captions You can choose captions ON or OFF during playback. Screen Saver When activated, the unit will go into screensaver mode if the same image remains on the screen for 3 minutes. Last Memory Select on, and the unit will resume playback from the point where playback was stopped. Speaker Setup Downmix Select “LT/RT” in DOWNMIX, the player will output the audio signal IN MIXED MONO. Select “Stereo”, then the player will output a stereo signal.
System Setup Preference Page Audio, Subtitle, Disc Menu This setting allows you to hear or read the subtitles of a DVD in your choice of English, Spanish and French etc. if the disc contains multiple languages. Parental DVD discs equipped with the child lock function are rated according to their contents and settings vary from disc to disc. Depending on the disc, you can lock out playback of the disc altogether.
Playback Functions Forward and Reverse Scan Press the and buttons to Forward or Reverse scan a disc during playback (x2, x4, x8, x16 x32). Slow Forward Press the SLOW button to Slow Scan a track on a disc during playback (1/2, 1/4,1/8, 1/16). Repeat Repeat a Title, Chapter or Track. Press the REP button on the remote control. Continually pressing the REP button will display a menu as follows: Repeat Chapter, Title, All.
Playback Functions Search by time During DVD disc playback, press the GOTO button on the remote control once, there will be a menu displayed on the screen. Use the direction buttons to select the desired item and press the Enter button. Select Title or Chapter and use the number buttons to input the desired title or chapter number. Press the direction button to return. Note: some DVD discs may not support this function.
Playback Functions Playing a JPEG JPEG is a common picture format. Hundreds of pictures can be stored in a disc in this format and viewed on the LCD screen. Normal Playback Load a JPEG disc into the DVD Player. After reading the disc, the DVD Player will display the JPEG file on the left side of the screen and the preview picture on the right side of the screen. Use the direction buttons to select the picture you wish to view and then press the ENTER button to confirm and start playback.
Troubleshooting Symptom How To Check The player cannot play. • Make sure the AV IN/OUT switch on the right side of the player unit is in the OUT position for standard play. • Make sure the disc door is completely closed. • Make sure a disc is loaded. • Make sure the disc is loaded with label side up. • Disc should be clean, not dirty or warped. • Player’s region code should be the same as the region code of the DVD disc.
Specifications Screen resolution 800 x 480 TFT screen size 10.2 inches (259.08mm) (16:9) Laser Wavelength Wavelength: 780/650nm Video System NTSC Frequency Response 20Hz - 20kHz ±2.5dB Audio Signal-to-Noise ≥ 85 dB Audio distortion + noise ≤ -70dB (1KHz) Channel Separation ≥ 70dB (1KHz) Dynamic Range ≥ 80dB (1KHz) 0.2 Audio Out Analog Audio Out Video Out Video Out Power AC100-240V 50/60Hz Power Consumption Dimension w (o) battery Weight w/o battery Output Level: 1.5V±1.
WARRANTY 90 DAY LIMITED WARRANTY Applies to Audiovox Video Products AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within ninety (90) days from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.
For Customer Service Visit Our Website At WWW.audiovox.com Product Information, Photos, FAQ’s Owner’s Manuals © 2005 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, N.Y.