DKP102 UNDER COUNTER DOCKING STATION for DT102, DT85, DT7 MESSAGE POWER SOURCE AUTO PRO.
Cautions And Warnings RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dange The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous Voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric to persons.
Materials Included In This Package 1) DKP102 Under Counter Docking Station for DT102, DT85 & DT7 (P/N: 136-3960) ~ 1pc 2) Hardware Package 1.6” (40.5mm) Phillips Head Screws – (4 pcs) 1.4” (35mm) Phillips Head Screws – (4 pcs) 1” (25mm) Phillips Head Screws – (4 pcs) Washers – (4 pcs) Spacers – 3/4" (4 pcs) Spacers – 1/2" (4 pcs) Spacers – 1/4" (4 pcs) 3) Remote Control (P/N: 136-3956) ~ 1pc 4) Adaptor AC to DC 100V/240V DC 12V 2.
Main Features • Under Counter Docking Station for DT102, DT85, DT7 • 125 Channel Cable Ready TV Tuner • AM / FM Radio•Alarm Clock • AV Input • Personal Message Recorder • Bass Boost • Countdown Timer 2
Connections & Setup Mounting Instructions Before Mounting Empty contents from the selected counter which the unit will be mounted. Clean the underside of the counter. We recommend the unit be mounted to the front edge of the counter. Mounting Procedure (Refer Figure 1) 1) Choose an appropriate mounting location underneath a cabinet or shelf. Close proximity to an electrical outlet and a TV antenna or cable connection will facilitate a neat, easy installation. Do not mount the DKP102 above a range or oven.
1 2 Template 3a Cabinet surface Spacer 3 DKP102 Side View Mounting Screw 128-7424 To prevent heat damage, do not place heating or cooking appliances beneath this unit. Install the unit as far as possible from a source of noise. (For example refrigerator, microwave oven, flourescent lamp etc).
Main Features Front Panel Controls 12 3 4 5 SOURCE AUTO PRO. 6 7 8 PLAY REC MESSAGE POWER TV RADIO TUNE CHANNEL 20 VOLUME 19 18 BASS BOOST 17 OPEN RADIO BAND/AlARM OFF CLOCK SET 15 14 16 STORE CLOCK MODE 13 TIMER MESSAGE 12 11 10 MIC 9 1. Power Indicator– Bright red when power is on. 2. Power Button – To turn the DKP102 on or off. 3. Source Button – Press this button to select from the four available sources DVD, TV , AV, Radio. 4. Auto Pro.
Main Features Back Panel Controls 1 TV ANT 2 3 3 3 4 5 DC 12V AUDIO R AUDIO L VIDEO IN FM ANT AM ANT 1. TV ANT – Connect the coaxial cable from an antenna or cable TV system to this jack. 2. DC 12V – Connect the supplied AC to DC adapter to this jack. The shuttle is designed for negative ground 12V DC operation. 3. AV IN – The DKP102 will accept an AV input through the AV jacks located on the rear of the unit. The video device could be a video game system, video camera, or other input device.
Remote Control Operation Battery Installation Before attempting to operate your Remote Control, install the batteries as described below. 1) Turn the Remote Control face down. Using a fingernail, lift the battery cover off. 2) Install two “AAA” batteries. Make sure that proper polarity (+ or -) is observed. 3) Align the cover tabs with the remote control and press down until the cover clicks.
* Function control is available on the unit and the remote control. ** Used only when Shuttle (DT102, DT85 or DT7) is installed. 1. POWER Button* Press this button to turn the DTT7810FM ON. Press the button again to turn the DTT7810FM OFF. 2. SOURCE Button* Use to select one of the four sources (DVD, TV, AV, and Radio) 3.
15. BAND Button** Used to select the desired radio band (FM1/FM2/AM) 16. AUDIO Button** Press this button to display and select the desired AUDIO language. Each time the button is pressed, the language or track changes. NOTE: The languages & tracks you can select vary from disc to disc. 17. ZOOM Button ** Press this button to enlarge the picture. 18. PAUSE(;)Button** Allows the user to pause the playback.
31. A-B Button Allow the user to repeat playback of a DVD or CD from point A to point B. 32. REPEAT Button** Allows the user to repeat a chapter, title, track, or all of a DVD, CD or MP3. 33. SEEK / CHANNEL DOWN (6) Button Use this button to decrease the TV channel number or radio station to the desired channel and to scroll downward in the menu options. 34.
System Panel Controls DKP102 Operation SETTING THE CLOCK: NOTE: All settings are preformed in standby mode. 1.Selecting 12 or 24 hour display mode: a.) Press the “clock mode” button once. The 12H/24H and AM/PM indicator will flash. b.) Press the “radio tune/clock set” (-) or (+) button to toggle between 12 or 24 hour modes. 2. Setting the time: a.) Press the “clock mode” button twice. The hours and minutes will flash. b.) Press the “radio tune/clock set”(-) button to set the hour. This will also set AM/PM.
Screen And System Panel Controls RADIO MODE: AM / FM – Press the source button until “Radio” appears on the display. Press the “Radio Band” button to select the following: ( AM, FM1 and FM2) Tune Radio Channel – Press the “Radio Tune” button either Up (+) or Down (-) to manually tune through the frequencies. “-” Button to decrease the radio frequency and the “+” button to increase the radio frequency. Storing a Radio Station in Memory 1.) Press preset button 1 through 5 to select the preset channel number.
Screen And System Panel Controls DKP102 WITH DT102 Note: The DKP102 default source is the DVD shuttle. When power is turned OFF the DKP102 will default to the DVD shuttle. SOURCE SELECTION: 1. DVD mode – When power is turned ON the DKP102 will be in DVD mode. When one of the DVD shuttles is installed it will power ON a moment after the DPK102 is turned ON. 2. TV mode – Press the “Source” button once. – The DKP102 will be in TV tuner mode. 3. AV mode – Press the “Source” button twice.
Installing the Shuttle (DT102, DT85 and DT7 ) into the DKP102 Pressing the Open button will unlock the shuttle housing and it will drop down slightly. Pivot the housing downward until it is at a right angle to the main unit. 4 1 Shuttle Housing (Optional) 2 3 180° AV1 Input 1) Lift the shuttle clamp (1) up to the top. 2) Install the lower (2) portion of the shuttle into the bottom of the shuttle housing (3).
Troubleshooting PROBLEM SOLUTION The DVD Player will not play Make sure the AV IN/OUT switch on the side of the player is in the OUT position for standard play. Check the type of disc. This DVD Player only plays DVD's, Audio CDs and MP3s. Make sure that the shuttle is installed correctly. Make sure the correct source (DVD) has been selected. There is no sound from the Speakers Make sure the system settings are correct. Make sure the volume is turned UP. Make sure the sound setup of the DVD is correct.
® ELECTRONICS CORP . 90 DAY LIMITED WARRANTY Applies to Audiovox Video Products AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within ninety (90) days from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.
For Customer Service Visit Our Website At WWW.audiovox.com Product Information, Photos, FAQ’s Owner’s Manuals © 2005 Audiovox Electronics Corp.