OWNER'S MANUAL ELECTRONICALLY-TUNED AM/FM/MPX RADIO WITH AUTO-REVERSE CASSETTE PLAYER, CD CHANGER CONTROLS AND QUARTZ CLOCK Model FD-250
OPERATING INSTRUCTIONS 1 cl 3 b n 24567 b s b o u cr nc o ct c cs c bt m c m b 8 b u br b qb p 9c pc q bl RADIO AND CASSETTE CONTROLS 1 ON-OFF POWER BUTTON Press this button to turn the unit on or off. 2 VOLUME/LEVEL CONTROL To increase the volume level, press the side of the control. The volume will increase and the level will be shown by the bars on the display panel. To increase the volume quickly, keep the button pressed. To decrease the volume level, press the side of the control.
4 BASS CONTROL To adjust the bass level, first select the Bass mode by pressing the Menu button once so the “BAS” indication appears on the display panel. Within 5 seconds of choosing the Bass to adjust the bass response mode, press the or side of the Level control as desired. The level will be shown by the bars on the display panel from a minimum of to a maximum of (the diamond in the center of the display represents flat response).
bl AUTO-STORE SYSTEM (AS) PRE-SET SCAN TUNING (PS) Press this button momentarily to scan the 6 stations pre-set into the memories of the radio band in use. The unit will stop at each pre-set station for 5 seconds before continuing to the next pre-set station (the pre-set number on the display panel will flash during this operation). Press the button again momentarily to stop the Pre-Set Scan operation and remain on the selected frequency.
bq REWIND BUTTON (REW) Pushing the Rewind button will cause the tape to move rapidly in the reverse direction of play. until the mechanism To stop Rewind movement, lightly push the Fast-Forward button disengages and normal play resumes. bp br PROGRAM SELECTOR To manually reverse tape direction and play the other side (program) of the cassette, lightly and Rewind buttons at the same time.
CD CHANGER CONTROLS Built into this radio are controls to operate an optional 10-disc or 6-disc CD changer. Please check with your SPS/Audiovox or Prestige car stereo specialist for recommendations of the models that will work with this radio. Adjustments of the audio functions (volume, tone, balance, and fader) operate in the same manner during CD play as they do for radio/cassette play. The following controls will operate the CD changer when it is installed and connected to this radio.
play of the disc will continue (“DISC” and “SCAN” will disappear from the display panel). The Disc Scan mode will also be cancelled by activating any other disc function (Select, Cue, Review, Shuffle or Repeat).
CARE AND MAINTENANCE The radio portion of your new sound system does not require any maintenance. We recommend you keep this manual for future reference on how to set the clock and for general reference of the many features found in this unit. As with any cassette player, the cassette section of this sound system does require a minimum of maintenance to keep it in good working condition. The following simple care and maintenance suggestions should be followed to prevent malfunctions of the cassette system.
