User Guide

Making Connections
With Your New FM Pro
Radio tuners and receivers can have different connections
for your new FM Pro antenna. Please find the connection
that best matches your tuner or receiver and follow the
listed instructions.
Power Connection:
Your FM Pro uses a power injector to send power to the
antenna through the antenna wire. This allows you to
install the antenna without a power line. Follow the steps
below to connect the power injector to your system.
See Fig. 4 on page 2.
1. Connect the antenna cable (not supplied) coming
from the FM Pro to the power injector on the terminal
labeled “TO ANTENNA”
2. Connect the short black cable on the power injector
labeled “TO RECEIVER” to your radio tuner or receiver
as listed in the FM Connections section located on
Page 4.
3. Plug the attached power supply into any working
electrical outlet.
FM-50
3
T0100-FMPRO-OM.qxp 3/26/03 12:45 PM Page C4