Operating Instructions Model No.: FPE1078 7.7” LCD TV/DVD Player For assistance, please call: 1-800-645-4994 Or Visit us at http://www.audiovox.
Thank you. . . . . . for choosing this tablet DVD player. For your own safety and in order to learn all about the functions available, please read this manual and keep it for future reference. Note: An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation.
Table of Contents A. Cautions and Warnings...........................................................................04 B. About This Manual............................................................................06 C. Desktop Base Installation............................................................................08 D. Prior to Operation.......................................................................09 E. Remote Control..........................................................................
A. Cautions and Warnings All operation and maintenance instructions must be followed and warnings adhered to. • Do not expose the unit to excessive moisture. • Do not place objects filled with liquids, such as vases, on the unit. • Do not use the unit where there are temperature extremes (below 41°F, 5°C or exceeding 95°F, 35°C). • Adjust the volume to prevent damage to speakers. • Sudden changes in the ambient temperature may cause condensation to form on the optical lens inside the unit.
• When replacement parts are required, be sure the service technician has used replacement parts that are specified. Unauthorised substitutions may result in fire, electric shock or other hazards. • Upon completion of any service or repairs to the unit, ask the service technician to perform operational checks to determine that the product is operating correctly. Handling the LCD panel Do not press hard or jolt the LCD panel. It may cause the LCD panel glass to break and injury may occur.
B. About This Manual The operations described mainly refers to the use of the remote control. Buttons with same or similar marking on the main unit have the same function as those on the remote control. If the symbol occurs on the screen during operation, the function requested is not supported by the media type inserted in the DVD player.
• In this manual, the language in the on-screen display is English. If you change the language, please follow the selected language in the on-screen display. • The screen shown as an example in this manual may be different from the actual screen. • On-screen displays subject to change without notice. Note: The types of functions and operations that can be used for a particular disc vary depending on the features of that disc.
C. Desktop Base Installation LCD Screen Unit Rear Unit Rear ThumbScrew Thumb Screw Unit Base 1. Place the tablet DVD player base on flat surface. 2. Align the thumb screw with the hole beneath the LCD Screen. 3. Thread the thumb screw into the hole beneath the LCD screen and turn the thumb screw counter-clockwise to tighten the base to the DVD player. Note: Referring to the illustration above, the thumb screw must be positioned facing the front of the DVD player or the unit will not be stable. 4.
D. Prior to Operation For setting up the unit please choose a location with sufficient air circulation to prevent overheating. The product must be positioned horizontally only. Do not place heavy objects on its housing. To protect the laser unit avoid dusty surroundings. If necessary, please use a cleaning disc carefully following its operating instructions. The unit was suddenly brought from a cold to a warm surrounding. => Please take out the disc and wait for about an hour, until the unit has warmed up.
Cleaning a Disc To clean a disc use a soft cloth without any cleaning agents. Only wipe from the center hole towards the outer edge, never in toward the center. Using the Remote Control Handset 1. The remote control uses a pre-installed Li-ion type battery. To prevent the battery from discharging, we’ve inserted an insulating strip. Please pull it out prior to first use. If the remote control should begin to operate unreliably replace the battery with a new battery of the same type.
E. The Remote Control Numeric Buttons Starts play or pauses the playback Navigation keys to operate the menu. ENTER confirms the selection Stops DVD playback Selects previous or next channel while in TV mode Selects the TV receiving mode (TV, IRC, HRC, STD) Skips channels that the user wishes not to view. Automatically searches for TV channels Used with “PICTURE” function to increase or decrease the item you select or the volume up or down Selects the picture adjust setting 10.
F. DVD Player 12 3 4 5 6 7 8 9 10 11 22 21 20 19 18 17 12 16 15 14 13 1. Power Button 12. Disk Slot 13. IR Remote Sensor 2. Program Button 3. Channel +/- Button 14. Power Indicated LED 15. Cable Antenna Connector 4. Volume +/- Button 5. Picture Button 16. SD/MMC Slot (512 max) 17. DC 12V Input Jack 6. TV/AV Button 7. Wide Button 18. AV In/Out Switch 19. Audio Right Jack 8. Previous/ Next Button 9. Play Button 10. Stop Button 20. Audio Left Jack 21. Video Jack 11. Eject Button 22.
G. Applying Power to the Unit a. Using AC adaptor Connect the supplied AC adaptor. AC adaptor INPUT: AC 100 ~ 240V, 50/60Hz, 0.7A OUTPUT: DC 12V, 1.5A b • Use the unit only the supplied AC adaptor. Use with non supplied AC adaptors may damage the unit. a • Do not touch the AC adaptor with wet hands. Doing so is dangerous which could result in an electric shock. • Do not use with a voltage other than the voltages displayed. Improper voltage could cause fire, electrical shock, or damage. b.
After connecting the unit to power, press the “POWER” button, and the logo picture will appear on the screen and the LED power indicator located on lower left front of the unit will be light. H. Connections Although this unit has its own screen, the unit can also be connected to an external television set as well. 1. Playing a Video Game 1) Slide the AV in/out button to the “In” position.
1) Connect the supplied AV (RCA) cables into the Audio L+ R and video input jack on the left side of the unit following the corresponding colors: (AudioLeft= White, Audio Right= Red, Video=yellow). 2) Connect the supplied AV cables on the other end to your TV. Match the cable by color code. I. Receiving TV Programs 1. Press “DVD/TV/AUX” until the word “TV” appears on the top right. 2. Press “AUTO”, the unit will search TV channels automatically. 3.
K. Playing DVDs DVD Playback 1. Press “DVD/TV/AUX” until the word “DVD” appears on the top right of the screen.; 2. Insert the disk in the right side of the unit with label facing to you. Then the disk will be pulled into the unit and play will begin automatically. DVD discs will usually show a menu to choose from. Use the navigation buttons on the remote control. Highlight the desired menu item and press the ENTER button to activate it. This starts the playback of the selected title.
Display Press the “DISPLAY” button. The picture below will appear . You can change all the items (except r ) in the table with and ENTER buttons if the functions are included in the disk. 1/17 2/32 0:01:45 1.ENG D 3/21 OFF 1/1 Normal DVD Camera Angles The movies on some DVDs have been recorded from various camera positions. This feature lets you enjoy the same scene from different perspectives. The function will be on the DVD case if it is available on the DVD .
Titles and Chapters During DVD playback you can skip through the DVD to 1/ 17 certain chapters. Press “DISPLAY” and enter 2/ 32 Ent er t he Chapt er Number di r ect l y 0: 01: 45 1. ENG D 3/ 21 the desired chapter number directly. The playback will OFF continue with that chapter. (Refer to the illustration to 1/ 1 the right “Display Mode” ) Nor mal Skip & Search Press , to playback the beginning of the previous or next chapter (DVD) or audio track (CD). To pause the DVD, press the button.
Playback Speeds [FF ] [REW ] Press the REW or FF ( ) buttons repeatedly to select the fast forward or reverse play speeds during playback. The display will change at the following speeds: 4X 2X 16X 100X Press the PLAY button to return to normal play. Repeat Modes Repeat Modes Press the REPEAT button during playback. Each time the button is pressed, the repeat mode changes as per the illustration .
CD Track: Repeats the track being played All: Repeat all tracks Off: Turns the repeat function off. Change Soundtrack Language During DVD playback press the AUDIO button to select a different audio language (if the DVD contains various audio languages). Change Subtitle Language During DVD playback press the SUBTITLE button to select the language for subtitles (if the DVD contains subtitle languages) or to deactivate that function.
L. Playing CDs During play back of an audio CD the following menu will appear: 1 0:03:08 01/05 2 3 1. Current file elapsed playing time 2. Playing Mode: , , , and so on. 3. Current file/ Total number of files in the folder. USING THE REPEAT FEATURE The default mode for the Repeat feature is OFF. Pressing REPEAT consecutively changes the repeat options: • Track- repeats the track that is playing. • All- repeats the disc that is playing.
M. PLAYING MP3-CDs MP3 is a format for storing digital audio. CD-quality songs are compressed into the MP3 format with very little loss of audio quality while taking up much less disc space. CD-R/RW discs that have been encoded in MP3 format are compatible with this system. 1 2 0:03:08 01/05 \...\F1: 032KBPS\TO1_AAAA AA 3 4 MP3 Playback Display 1. Current file elapsed playing time 2. Playing Mode: , , , and so on. 3. The current file’s position. 4.
Limitations on display • The following letters are available display: capital or small letters A through Z, “_”(underscore), “-” (hyphen), and numbers 0 through 9. Note: • WMA files cannot be played back. 1. Load the MP3 CD with the label facing front. A folder list appears on the screen. 2. Press the or button to select the desired folder. • Press the ENTER button (or the selected folder. button) to display a table of contents in the 3. Press the or button to select the file to be played back. 4.
10. USING THE REPEAT FEATURE The default mode for the Repeat function is OFF. Pressing REPEAT consecutively will access the following repeat options: • Track- repeats the track that is playing. • All- repeats the disc that is playing.
b. Choose “ ” and press and to choose the speed of picture slide show. c. Press ENTER on the file you want to view and the unit will display the complete picture. Note: a. “1/20” stands for the current file and total file number. b.Press “ ” one time to rotate the picture for 90 degrees counterclockwise and press “ ” to rotate the picture for 90 degrees clockwise. c. Press will return to the previous picture. Press d. Press to stop playback. 25 will go to the next picture.
O. Initial Settings Once the initial settings have been completed, the settings will be retained in the unit’s memory until they are changed, even if the power to the unit is turned off. Setting “ Language ” page 1. Press the SETUP button. The setup screen and “LANGUAGE” appear. At the same time, “ ” is highlighted. Note: To close the setup screen, press the SETUP button. L ANG UAG E > English > English > Off >English Menu Language Disc Audio Disc Subtitle Disc Menu 2.
Disc Menu: Disc Subtitle: Select the desired disk menu language. Select the desired subtitle language. Note: a. There are five languages to select from: English, French, Spanish, German and Japanese. b. Not all disks have five languages for audio, subtitle and menu language. Setting “ Display” page 1. Press the SETUP button. The setup screen appears. 2. Press the button to select “ ”. “DISPLAY” screen appears. 3. Press the button, “TV Aspect” is highlighted. 4.
WIDE: 16:9 This setting is used with a wide screen TV set. Use“FULL” size. (Setting the wide screen TV to “FULL” mode is also necessary.) Note: • The screen size may differ depending on the DVD discs. • If you select “WIDE” to remove the black bands on screen when a wide screen disc is played, the picture may be slightly distorted. • In some discs, even if “Normal/PS” is selected, the black bands may remain on the screen. Setting “Lock” page 1. Press the SETUP button. The setup screen appears. 2.
When selecting the rating level, a message appears. Please follow the instructions displayed on the screen. 5. Press to enter “ ” page . 6. Enter the 4 digital password and press ENTER to confirm. 7.Press the or button to select the rating levels and press the ENTER to confirm your selection. Note: a. If you forget your password, enter 3308. b. DVD discs may or may not respond to the parental lock settings. Make sure this function works with your DVD discs.
3. Press the button, “Load Default” is highlighted. 4. Press the or button to select the other menus in “OTHER” page. OTHERS Loa d Default Sc reen Sav er Las t Mem ory > S e lec t > On > On 5. Press to enter the sub menu. 6. Press the or button to select the sub menu and press the ENTER to confirm your selection. 7. Repeat steps 3-5 for other menus. Note: Press to return the previous menu. Load Default: This will return the unit to the default settings. Note:The password doesn’t change.
Specifications: Model Number: FPE1078 Ver: 00 UPC number: 0-44476-02741-3 Display Features Display type Screen Size Aspect Ratio Panel Resolution Brightness Contrast ratio Viewing Angle Backlight life TFT-LCD 7.
Playback Media Compatibility Audio CD CD-R CD-RW DVD-R DVD-RW DVD-Video Picture CD VCD SVCD SD/MMC YES YES YES YES YES YES YES YES YES YES* Playable Format (Codec) MP3 CD-DA VCD 1.1 VCD 2.
Power Requirements Power Source Unit input power Power ON consumption 100-240 VAC 50/60Hz 0.7~0.3A 12VDC 2.5A 13W Dimension (WxHxD) Unit W/stand 10.75 x 8.5 x 4.6 (in) Unit W/O stand 10.75 x 7 x 3 (in) Weight (N.W.) Unit W/stand 4.2 (lb) Unit W/O Stand 3.
90 DAY LIMITED WARRANTY Applies to Audiovox Video Products AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within ninety (90) days from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.
