FPE1907DV 19” HD FLAT PANEL LCD TV WITH BUILT-IN DVD PLAYER OWNER'S MANUAL FOR ASSISTANCE CALL CUSTOMER SERVICE AT 1-800-645-4994 OR VISIT US AT WWW. AUDIOVOX.
SAFETY PRECAUTIONS The lightning flash with an arrowhead within a triangle alerts you to uninsulated dangerous voltage within the product's enclosure that could cause an electric shock. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ÉLECTRIQUE NE PAS OUVRIR The exclamation point within a triangle alerts you to the presence of important operating, maintenance and servicing instructions in this user’s manual.
SAFETY PRECAUTIONS reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
TABLE OF CONTENTS SAFETY PRECAUTIONS ................. 2 – 3 SPECIAL FUNCTIONS ....................... Display Function (DVD) .................. Locating a Specific Title (DVD) ........ Locating a Specific Chapter/Track .... Locating a Specific Time ................... IMPORTANT SAFETY INSTRUCTIONS .......................................................... 4 DISC FORMATS .................................. 6 REMOTE CONTROL ........................... 7 CD/DVD PROGRAMMABLE MEMORY ..........................
DISC FORMATS This unit can playback: JPG-CD DVDS [8CM/12CM DISC] picture viewer CD-R/CD-RW AUDIO CDS [8CM/12CM DISC] Compatible REGION MANAGEMENT INFORMATION Region Management Information: This unit is designed and manufactured to respond to the Region Management Information that is encoded on DVD discs. If the region number printed on the DVD disc does not correspond to the region number of this unit, this unit cannot play that disc. 1 The region number of this unit is .
REMOTE CONTROL USING THE REMOTE CONTROL • • • Point the remote control at the REMOTE SENSOR located on the unit. When using this unit in very bright light, the infrared REMOTE CONTROL SENSOR may not work properly. The recommended effective distance for using the remote control is about 16 feet (5 meters). TO CHANGE THE REMOTE CONTROL BATTERY 1. Open the battery door. 2. Insert two “AA” batteries.
REMOTE CONTROL REFERENCE GUIDE 4) TV Button Press to select TV mode. 5) DVD Button Press to select DVD mode. 6) MTS Button Press to select MONO sound, STEREO sound and Secondary Audio Program (SAP). 7) CC Button Press to activate the Closed Captioning feature. This function only works on programs broadcast with captions. 8) SLEEP Button Press to set the SLEEP timer. The unit will remain on for the time that is set, and will automatically shut off afterwards.
REMOTE CONTROL REFERENCE GUIDE 25) DISPLAY Button Press to change disc status information displayed on the screen. 26) PICTURE Button Press to select from preset screen display settings to match the type of show you are watching (Standard, Dynamic, Personal, Soft & Movie) 27) EXIT Button Press to return to previous menu or exit the menu and return directly to normal viewing. 28) SETUP Button Press to enter and exit the SETUP menu of the DVD player.
UNIT REFERENCE GUIDE TOP, FRONT & SIDE VIEW 6 7 8 1 2 3 9 10 4 5 11 12 13 14 15 1) 2) 3) 4) 5) 6) 7) 8) 9) STANDBY/ON Button Turns the unit on and off. MENU Button Enters and exits the TV menu. FUNCTION Button Selects TV, AV IN, YUV IN, DVD or PC IN. – VOL + Controls Adjusts the volume level and highlight selections (Left & Right) on the menu screen. / Buttons Selects a TV channel and highlight selections (Up & Down) on the menu screen. PLAY Button Press to start or resume playback of a disc.
UNIT REFERENCE GUIDE BACK & BOTTOM VIEW 16 17 21 22 18 23 19 20 24 25 26 27 23) YUV IN Component Video Input Jacks (Y/PB/PR) 24) YUV IN Audio Input Jacks (Left/Right) 25) AV IN S-Video Input Jack 26) Headphone Jack 27) TV Antenna Cable Terminal - Coaxial TV Antenna Input 16) DC IN 12 – 24V 17) AV OUT Video Output Jack 18) AV OUT Audio Output Jacks (Left/ Right) 19) AV IN Video Input Jack 20) AV IN Audio Input Jacks (Left/Right) 21) PC IN MONITOR/VGA Jack 22) PC IN Audio Jack 11 PLV31190CS1-DC_IB
CONNECTIONS CONNECTING A TV ANTENNA/CABLE/SATELLITE To view television channels correctly, a signal must be received from one of the following sources: - An indoor or outdoor aerial antenna - A cable system - A satellite system Connecting a Digital Antenna The tuner in this TV receives ATSC TV signals from an antenna. This digital TV can receive standard (SDTV) and high definition (HDTV) over the air broadcasts.
CONNECTIONS CONNECTING TO A/V DEVICES (VCR, PVR, Camcorder, Game System, etc.) Connecting to Devices with an S-Video Output To connect to A/V devices such as a VCR or camcorder: - Connect to a VCR Connect the right (red) and left (white) audio output from the VCR to the right (red) and left (white) input on this unit (Audio cable not included). Connect the S-VIDEO output from the VCR to the S-VIDEO input on this unit (S-VIDEO cable not included).
CONNECTIONS Connecting to Devices with a Composite (yellow RCA-type) Video Output To connect to A/V devices such as a VCR or camcorder: - Connect to a VCR Connect the right (red) and left (white) audio output from the VCR to the right (red) and left (white) input on this unit (Audio cable not included). Connect the video (yellow) output from the VCR to the video input on this unit (Video cable not included). Make sure you connect both audio and video from the same VCR to the same input (AV IN).
CONNECTIONS Connecting to Devices with a Composite (yellow RCA-type) Video Input To connect to A/V devices such as a VCR, PVR or camcorder: - Connect to a VCR/PVR Connect the right (red) and left (white) audio input from the VCR/PVR to the right (red) and left (white) output on this unit (Audio cable not included). Connect the video (yellow) input from the VCR/PVR to the video output on this unit (Video cable not included).
CONNECTIONS CONNECTING A HIGH-DEFINITION (HD) SOURCE High-Definition (HD) Devices with component video output must be connected to the YUV input. Connect the three video outputs (Y, Pb, Pr) from the source to the corresponding video inputs on this unit (Component video cable not included). Connect the right (red) and left (white) audio output from the source to the right (red) and left (white) input on this unit (Audio cable not included).
POWER SUPPLY USING THE CAR POWER ADAPTER The car power adapter allows the unit to be used with vehicles that have a 12 – 24V, negative ground electrical system. Cautions: • Use the provided car power adapter only. Use with other car power adapters could damage the unit. • The car power adapter included with this unit is for its use only. Do not use it with other equipment. • In the interest of traffic safety, do not operate this unit or view videos while driving a vehicle.
INSTALLATION REMOVING THE BASE STAND WARNING: The LCD Display is very fragile, and must be protected at all times when removing the base stand. Be sure that no hard or sharp, or anything that could scratch or damage the LCD display, come in contact with it. Do NOT place pressure on the front of the unit at any time because the screen could crack. 1. Disconnect any cables or cords connected to the unit. 2.
USING HEADPHONES • Turn down the volume before connecting headphones to the unit, then adjust the volume to your desired level. • When headphones are connected, no sound will come from the front speakers. Note: • Avoid listening to sound at high levels for prolonged periods of time. This may be harmful to you and may cause hearing loss. UNIT OPERATION TURNING THE UNIT ON When the AC power cord is connected, press the STANDBY/ON button on the top of the unit to turn it on.
CD/DVD OPERATION This owner’s manual explains the basic instructions of this unit. Some DVDs are produced to limit operation during playback. For example, many DVDs do not allow users to skip government warnings, or in some cases previews or other features. This is not a defect in the unit. Refer to the instruction notes of discs. ” may appear on the screen during operation. A “ “ operation is not permitted by the unit or disc. ” means that the desired PLAYING A DISC 1.
CD/DVD OPERATION AUDIO SELECTION (DVD) On some discs, the sound is recorded in two or more formats. Follow the directions below to select the type of playback. 1. While a disc is playing, press the AUDIO button to show the current audio format number. 2. Press the AUDIO button repeatedly to select the desired audio format. Note: • If only one audio format is recorded, the number does not change. • About two seconds later, playback continues in the new audio format. SUBTITLE SELECTION (DVD) 1.
SPECIAL FUNCTIONS DISPLAY FUNCTION (DVD) Using DISPLAY, you can check the current settings of the following items: ANGLE, AUDIO and SUBTITLE. • While the disc is playing, press the DISPLAY button to display the screen shown below. LOCATING A SPECIFIC TITLE (DVD) If a DVD video disc contains title numbers, you can locate a specific title by directly selecting a title number. 1. In stop mode, press the GOTO button. 2.
CD/DVD PROGRAMMABLE MEMORY PROGRAMMABLE MEMORY The two types of programmed playback provided by this Unit are title/chapter programmed playback and track programmed playback. TITLE/CHAPTER PROGRAMMED PLAYBACK (DVD) 1. Press the MEMORY button while the disc is stopped. 2. Enter the title numbers in . Use the or button to move the highlight to chapter and enter the chapter numbers in . 3. Use the , , or button to move to the other fields. 4. Repeat steps 2 to 3. 5.
REPEAT PLAYBACK REPEATING A SPECIFIC SECTION (DVD) (CD) You can play a specific section repeatedly. 1. While the disc is playing, press the REPEAT A-B button at the beginning of the section ( is displayed) you want to play repeatedly. is displayed) you want 2. Press the REPEAT A-B button again at the end of the section ( to play repeatedly. 3. The unit will immediately begin replaying your selection. TO RESUME NORMAL PLAYBACK 4.
CUSTOMIZING THE DVD FUNCTION SETTINGS LANGUAGE SETUP 1 . Press the SETUP button in stop mode. button to change the highlight cursor. Use the or button 2 . Use the to select a language, then press the ENTER button. The screen will change to your selected language immediately. 3 . To exit the SETUP MENU and return to the normal screen, press the RETURN or SETUP button. VIDEO SETUP 1 . Press the SETUP button in stop mode. or 2 .
TV SETUP VIDEO MENU 1. Press the TV MENU button. button to select Video. 2. Press the ENTER or or button to select the options (Picture Mode, Brightness, Contrast, Saturation, 3. Use the or button (The screen Tint, Sharpness or Color Temperature). Adjust them using the button to go into the detailed will change to your desired setting); or press the ENTER or settings. 4. Press the EXIT button to return to the previous menu. 5. Repeat steps 3 and 4 to adjust other options. 6.
TV SETUP VGA Settings in PC Mode Use the or button to select the options (Auto Adjust, H. Position, V. Position, Phase or Clock). Adjust them using the or button. The screen will change to your desired setting. (Press button to confirm Auto Adjust.) the ENTER or Video Auto Adjust Audio Setup H. Position 50 V. Position 50 Phase 3 Clock 127 Parental Best definition 1440 x 900 - Resolution : 1,440 x 900 max Refresh Frequency : 60Hz max • H.
TV SETUP TV MENU (For TV Mode Only) Video Tuner Mode Cable 1. Press the TV MENU button. Auto Scan Audio 2. Use the or button to select TV. Press the Auto Scan Add CH Channel Skip ENTER or button to go into the TV settings. TV MTS Stereo or button to select the options 3. Use the Setup Audio Language English (Tuner Mode, Auto Scan, Auto Scan Add CH, Parental Channel Skip, MTS or Audio Language).
TV SETUP TV MODE Video OSD Language AV / YUV / DVD MODE Video English Time Setup Audio TV OSD Language English Time Setup Audio Caption Restore setting Setup Setup Caption Restore setting Parental Parental Setup Select EXIT Exit Setup Select EXIT Exit PC MODE Video OSD Language • OSD Language : Select from English / Español / Français.
TV SETUP Caption Setting: Video Audio Analog Closed Caption Off Digital Closed Caption Off Video Audio Digital Caption Style TV TV Setup Setup Parental Parental Caption Caption Style As Broadcaster Font Size Small Font Style Style 1 Font Color Green Font Opacity Solid Background Color Black Background Opacity Translucent Window Color White Window Opacity Transparent Digital Caption Style Select EXIT Return Select EXIT Return • Analog Closed Caption : Select the analog close
TV SETUP Parental Control Setting: 4. Use the or button to select various Parental settings. Press the ENTER or button to go into the detailed settings. 5. Use the , , and buttons to move among the rating levels. Press the ENTER button to change the mode between Blocked and Allowed. 6. Press the EXIT button to return to the previous menu. 7. Repeat steps 4 - 6 to adjust other options. 8. To exit the MAIN MENU and return to the normal screen, press the EXIT button repeatedly.
LANGUAGE CODE LIST 32 PLV31190CS1-DC_IB_ENG_AUD.
MAINTENANCE CLEANING THE DISC A defective or soiled disc inserted into the unit can cause sound to drop out during playback. Handle the disc by holding its inner and outer edges. • Do NOT touch the surface of the unlabeled side of the disc. • Do NOT stick paper or tape on the surface. • Do NOT expose the disc to direct sunlight or excessive heat. • Clean the disc before playback. Wipe the disc from the center outward with a cleaning cloth. • NEVER use solvents such as benzine or alcohol to clean the disc.
TROUBLE SHOOTING GUIDE SYMPTOM CAUSE (AND REMEDY) No power. • Ensure the AC power cord is connected. • Turn on the unit. The remote does not function. • • • • Remove any obstacles between the remote and the unit. Use the remote near the unit. Point the remote at the remote sensor on the unit. Replace the batteries in the remote with new ones. DVD No sound or only a very low-level sound is heard. • Make sure that you've selected DVD mode. • The system is in pause mode.
TROUBLE SHOOTING GUIDE SYMPTOM CAUSE (AND REMEDY) TV Bad Picture (snow, multiple images, distortion, blurry) • Check the location of the antenna and adjust it if necessary. • Make sure the antenna cable is firmly connected. • Make sure all input cables are firmly connected. No sound. • Increase the volume. • Check whether the mute function has been activated on the remote control. Black and picture. white • Check the Video setting within the TV Menu.
Unit : INCH 4 7/8 22 1/4 15 1/2 7 3/8 12 3/4 8 3/4 8 1/2 12 1/2 Printed in China 811-311991W310 PLV31190CS1-DC_IB_ENG_AUD.