FPE1909DVDC
Dear Customers May we take this opportunity to thank you for purchasing this LCD TV .We strongly recommend that you carefully read the safety and operation instructions before operating your TV. FOLLOW INSTRUCTIONS AND HEED ALL WARNINGS on your LCD TV found in this manual. Safety Information Note: Before connecting the AC power cord to the DC adapter outlet, make sure the voltage designation of the DC adapter corresponds to the local electrical supply.
Precautions Please read these precautions before operating this unit. Power cord protection: Never use your LCD TV if the power cord has been damaged. Do not allow anything to rest on the power cord, and keep the cord away from where people can trip over it. Be sure to hold the plug, not the cord, when disconnecting the LCD TV from an electric socket. Locate your LCD TV near an easily accessible AC outlet.
Table of contents Safety Information……………………………………………………………….……………………..………..2 Precaution………….…………………………………………………………….……………………..………..3 Table of contents……………………………………………………………….……………………..………..4 View of the Unit……………………………………………………………….……………………...……..5-6 Remote Control……...…………………………………………………………….……………………...…..7-8 For TV operation Basic opeartion……...……………………………………………………………….………………….…..9-10 Menu.opeartion..……………………………………………………………….…………………………..11 P IC TU R E S etti ng s … … ...… …… … … …… … …… …… …… …… .
The View of the Unit STATUS LED The LED will turn red in standby mode, and turn green in the on mode IR Infrared Receiver VOL+/VOL- button Decrease and increase volume. MENU button Press once to display the OSD (on screen display), press again to turn the OSD off. CH+/CH- button Decrease and increase channels. SOURCE button Press this button to select TV, AV, S-Video, DVD, PC or SCART mode. STANDBY button Press this button to turn the LCD on or off.
The View of the Unit 6
Remote Control 1 POWER button 2 NUMERIC buttons (0-9 and -/--) 3 MENU button 4 DIRECTION and ENTER/PLAY button 5 INFO button 6 SLEEP button 7 MUTE button 8 PLAY/PAUSE button (DVD only) 9 STOP button (DVD only) 10 GOTO button (DVD only) 11 A-B button (DVD only) 12 TITLE button (DVD only) 13 ANGLE button (DVD only) 14 FAST REVERSE button (DVD only) 15 FAST FORWARD button (DVD only) 16 SOURCE button 17 CH+/CH- button 18 VOL+/VOL- button 19 RETURN button 20 DVD SETUP butt
Remote Control Battery installation Insert the batteries while observing the correct (+) and (-) polarities. Service life of batteries The batteries normally last for about one year although this depends on how often and for what operations the remote control is used. If the remote control unit fails to work even when it is operated near the unit, replace the batteries. Use 2 x “AA” type batteries Notes: Do not use rechargeable (NI-Cd) batteries.
Basic operation (For TV Opeartion) Connect the power supply. 1. Connect the power, then press the STANDBY button on the front panel to turn on the unit. 2. Press the SOURCE button to select TV mode, then press RIGHT button to confirm. 3. Adjust the volume. Adjust the volume Press VOL- button to decrease the volume. Press VOL+ button to increase the volume. Mute the volume Press MUTE on the remote control during playback to turn off the sound, press it again to turn on the sound.
Sleep function Press SLEEP button to set up the sleep time to shut down your monitor. You can select 15, 30, 45, 60, 90, or 120 minutes and off by pressing the SLEEP button continually. Viewing the AV SOURCE such as DVD\VCR\CAMCORDER Press the SOURCE button Select the suitable input to pickup the AV signal.
Navigating the Menu 1. Press MENU button on the remote control, the on-screen menu will appear on the screen. Use the UP/DOWN buttons to select your main menu option. 2. PICTURE MENU SOUND MENU Make agjustments to your picture settings. Customize the audio option and effects. TIME MENU SETUP MENU Set up a varity of time options. Set up a varity of features LOCK MENU CHANNEL MENU Set up a varity of features. Edit channels. Use the LEFT/RIGHT/UP/DOWN buttons to select an option of the sub-menu.
PICTURE Settings 1. Press the MENU button on the remote control to display the Main menu, and use the LEFT/RIGHT/UP/DOWN buttons to select the PICTURE menu. 2. Use the LEFT/RIGHT/UP/DOWN buttons to highlight an individual PICTURE option, use the LEFT and RIGHT buttons to change the setting, and press the MENU to exit . 3. The PICTURE menu includes the following options: Picture Mode Cycles among picture display modes: Personal, Standard, Dynamic, Soft.
SOUND Settings 1. Press the MENU button on the remote control to display the Main menu, and use the LEFT/RIGHT/UP/DOWN buttons to select the SOUND menu. 2. Use the LEFT/RIGHT/UP/DOWN buttons to highlight an individual SOUND option, use the LEFT and RIGHT buttons to change the setting, and press the MENU to exit 3. The SOUND menu includes the following options: Sound Mode Cycles among sound display modes: Personal, Standard, Music, Movie. Bass Controls the relative intensity of lower pitched sounds.
CHANNEL Settings 1. Press the MENU button on the remote control to display the Main menu, and use the LEFT/RIGHT/UP/DOWN buttons to select the CHANNEL menu. 2. Use the LEFT/RIGHT/UP/DOWN buttons to highlight an individual CHANNEL option, use the LEFT and RIGHT buttons to change the setting, and press the MENU to exit 3. The CHANNEL menu includes the following options: Antenna You can choose between Air and Cable. Auto Scan Auto scan the channel Favorite Choose your favorite channel. Channel NO.
SETUP Settings 1. Press the MENU button on the remote control to display the Main menu, and use the LEFT/RIGHT/UP/DOWN buttons to select the SETUP menu. 2. Use the LEFT/RIGHT/UP/DOWN buttons to highlight an individual SETUP option, use the LEFT and RIGHT buttons to change the setting, and press the MENU to exit. 3. The SETUP menu includes the following options: MENU Language Selects to display all on-screen menus in your language of choice Transparency Can choose on or off.
TIME Settings 1. Press the MENU button on the remote control to display the Main menu, and use the LEFT/RIGHT/UP/DOWN buttons to select the TIMEmenu. 2. Use the LEFT/RIGHT/UP/DOWN buttons to highlight an individual TIME option, use the LEFT and RIGHT buttons to change the setting, and press the MENU to exit 3. The TIME menu includes the following options: Sleep timer Choose the sleep timer. Time Zone Choose the time zone. Daylight Saving Time Choose on or off.
LOCK Settings 1. Press the MENU button on the remote control to display the Main menu, and use the LEFT/RIGHT/UP/DOWN buttons to select the LOCKmenu. 2. Use the LEFT/RIGHT/UP/DOWN buttons to highlight an individual LOCK option, use the LEFT and RIGHT buttons to change the setting, and press the MENU to exit. 3. The LOCK menu includes the following options: Change Password Choose a new password. System Lock Allow you to turn on or off.
Basic DVD Operation Connect the power supply. 1. Connect the power ,then press the STANDBY button to turn on the unit. 2. Press SOURCE button to select DVD input mode and press RIGHT button to confirm. 3. Press EJECT on the remote control to open the disc tray, then insert a disc correctly. 4. Press the PLAY button to start play. (some discs may play automatically) When a menu screen appears on the TV screen. In case of interactive DVDs with control, a menu screen appears on the screen.
Random playback Press RANDOM during playback. In random mode, if you press , it may be skip to a random chapter instead of next chapter. Press RANDOM again to return normal playback. To Scan at Fast Forward or Fast Reverse playback You can press or button on the remote control during playback. [Screen display] X2 X2 The speed of advance (reverse) is relatively slow at first. When the button is pressed again, the speed becomes faster.
Viewing from another Angle Some DVDs may contain scenes which have been shot simultaneously from a number of different angles. For these discs, the same scene can be viewed from each of these different angles using the ANGLE button. (The recorded angles differ depending on the disc used.) Press ANGLE repeatedly until the desired angle is selected. For your reference: This function only works for discs having scenes recorded at different angle. Repeat Play Press REPEAT during playback.
GENERAL Settings 1. Press the SETUP button on the remote control to display the Main menu, and use the LEFT/RIGHT/UP/DOWN buttons to select the GENERAL SETUP menu. 2. Use the LEFT/RIGHT/UP/DOWN buttons to highlight an individual GENERAL SETUP option and to change the setting. Press the SETUP to exit the menu. 3. The GENERAL menu includes the following options: TV SYSTEM Cycles among TV SYSTEM modes: AUTO,PAL,.NTSC SCREEN SAVER To turn on or off the SCREEN SAVER.
PREFERENCE Settings 1. Press the SETUP button on the remote control to display the Main menu, and use the LEFT/RIGHT/UP/DOWN buttons to select the PREFERENCE menu. 2. Use the LEFT/RIGHT/UP/DOWN buttons to highlight an individual PREFERENCE option and to change the setting. Press the SETUP to exit the menu. 3.
ANALOG AUDIO Settings 1. Press the SETUP button on the remote control to display the Main menu, and use the LEFT/RIGHT/UP/DOWN buttons to select the ANALOG AUDIO SETUP menu. 2. Use the LEFT/RIGHT/UP/DOWN buttons to highlight an individual ANALOG AUDIO option and to change the setting. Press the SETUP to exit the menu. 3.
Specifications Lcd panel INPUT Size 19 ’’ Resolution 1440 Brightness 300 Contrast ratio 800:1 Viewing angle 170/160 (H/V) VIDEO 1 COMPONENT 1 VGA/ VGA AUDIO 1 RF 1 AUDIO(L/R) 2 HDMI 1 POWER SOURCE DC-12V Standard Note : Design and specifications are subject to change without notice. Weight and Dimensions shown are approximate.
