20" LCD TV Operating Instructions

Basic Operations

Turning on

Turning off

Selecting input signal

1 Connect the power correctly, then the red indicator lights up and the

unit is in STANDBY mode. (See Page 14.)

2 Press the POWER ( )button on the remote control or on the unit to

turn on the TV set.The indicator LED will turn to yellow.

If you want to turn off the power completely, unplug the power cord

from the wall outlet.

Note: Do not switch the on/off state of the unit quickly. The interval of

the turning on and turning off should be more than 5 seconds.

With the power on, press the POWER ( ) button to turn off the TV and

put the TV in STANDBY mode, the indicator LED will turn to red.

1 Press the SOURCE button on the unit or

button on the remote control. The screen

displays the menu as shown on the right.

2 Press CH5/6 to highlight your desired

input signal source. Press VOL+/- or wait

for about 4 seconds and the desired signal

source will be selected.

SOURCE

SVIDEO

YPbPr/YCbCr

Note: All buttons shown in the manual are located on the

remote control unless otherwise indicated.

S.M