27” LCD TV with DVD Player Operating Instructions Model No. FPE2706DV For assistance, please call: 1-800-645-4994 Or visit us at WWW.AUDIOVOX.COM Before connecting, operating or adjusting this product, please read these instructions completely.
Table Of Contents Important Safety Instruction----------------------------------------------------------------------1 Product Features ------------------------------------------------------------------3 Disc Information -------------------------------------------------------------------4 Front Panel---------------------------------------------------------------------------5 Rear Panel----------------------------------------------------------------------------7 Remote Control---------------------------------
Important Safety Instructions The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Important Safety Instructions Note: 1. 2. 3. 4. 5. 6. 7. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. DANGER: Visible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 3. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit. Leave all servicing to qualified service personnel. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use near water. Clean only with dry cloth.
Product Features This product is designed with movable Disc Tray. The Disc Tray can be installed in two different positions. The movable Disc Tray offers you the flexibility to choose which direction to insert your DVD in order to maximize your space. The unit incorporates high-resolution LCD display, DVD player and TV receiver in one system. Multiple Mode High Resolution Adopt an MPEG2 decoding format to achieve horizontal resolution more than 500 lines.
Disc Information Discs Formats Supported By This Player DISC LOGO CONTENTS SIZE MAXIMUM TIME 133min(SS-SL) DVD Audio+Video (active picture) 12cm 242min(SS-DL) 266min(DS-SL) 484min(DS-DL) CD Audio 12cm JPEG Still high resolution 12cm 74min The operating method of some DVD discs is specified by the software maker. Please refer to the instruction manual of the disc.
Front Panel Front and Right View 1. Disc Tray Slot Insert disc into this slot. 2. SD/MS/MMC card port Insert SD/MS/MMC card into this slot. 3. USB Port Connecting to the USB device. 4. 27" Color TFT screen 27" color TFT screen clearly shows your picture. 5. SOURCE button Press to enter the Input menu and then use the buttons to select mode: TV, AV1 (Composite1), AV2 (Composite2), AV3 (Component1), AV4 (Component2), VGA, HDMI, then press the Enter button to enter the selected mode. 6.
Front Panel (Continued) 7. CH ▲/▼button In TV mode, press to select channels. In setup menu, the same function as ▲/▼ direction buttons. 8. VOL ▲/▼ button Press to decrease or increase the volume, the same function as ◄/► direction buttons in setup menu. 9. STOP button Press to stop playback in DVD mode. 10. PLAY button Press to start playback in DVD mode. 11. EJECT button Press to eject the disc out from the disc tray. 12. POWER button Press to enter or exit the standby mode. 13.
Rear Panel Rear View Open the back cover on the right side of the unit’s rear panel, all the jacks will appear, as shown on the figure below: 1. Y/Pr(Cr)/Pb(Cb) and L/R audio Input Jacks Connections for the Y/Pr(Cr)/Pb(Cb) inputs in AV3 (Component) mode. 2. Y/Pr(Cr)/Pb(Cb) and L/R audio Input Jacks Connections for the Y/Pr(Cr)/Pb(Cb) inputs in AV4 (Component) mode. 3. Video and L/R audio Input Jacks Connections for the audio and video signal input in AV1 (Composite) mode. 4.
Remote Control Remote Control Buttons Functions HDMI, DVD, press the Enter button to enter the selected mode. 7. Direction buttons ▲▼◄► In the setup menu, press the ▲▼button to select the desired items, press the ◄► button to adjust or set. 8. Enter button Press to confirm selection or exit the setup in the setup menu. 9. Sleep button Press to set the sleep time. 10. TV button Press to shift to TV mode. 11. Signal button Press to display the ATSC signal status. 12.
Remote Control (Continued) button to adjust or set. 7. Enter button Press to confirm selection or exit the setup in the setup menu. 8. Audio button In DVD mode, press to select audio language when the DVD disc with multiple audio languages is played. 9. Angle button In DVD mode, Press to select various camera angles (if the DVD disc contains multiple camera angles). 10. Dvdmenu button Press to access the disc menu in DVD mode. 11. Setup button Press to access the DVD setup menu under DVD mode.
Remote Control(Continued) Preparation of Remote Control Using Remote control Softly push the back cover plastic latch to open Point the remote control from no more than the battery compartment. about 20 feet (7m) from the remote control sensor and at an angle of 60 degrees from the front of the unit. Insert two batteries (1.5V, size AAA), please make sure the polarity matches the marks inside the compartment. The Softly press the back cover to close it.
Special Features of the DVD Module Note: before removing or installing the DVD module, unplug the unit from the AC power source. The supports to install the extended functional modules are located in two different positions (above and to the side) and supports the installation of two functional modules at the same time. Please follow the below steps to remove or install a function module.
System Connections Do not connect the power cord until all other connections have been made. Ensure that you observe the color cables when connecting audio and video cables. Before connecting, open the cover on the right side of the unit’s rear panel. Connecting To External AV Signal Source (AV1) Use the audio and video cable to connect the input jacks on the right side of the unit’s rear panel to the external AV signal source.
System Connections Connecting To External AV Signal Source (AV2) Use the audio and video cable to connect the input jacks on the right side of the unit’s rear panel to the external AV signal source. Also use the S-Video cable to connect the S-Video input jack on the right side of the unit’s rear panel to the external AV signal source. Note: S-VIDEO cable will produces higher quality images.
System Connections Connecting to External AV Signal Source (AV3/AV4) Use the audio and video cables to connect the Y/Pb (C b) /Pr (Cr) input Jacks on the right side of the unit’s rear panel to the external AV signal source. After connecting, turn on the power of the unit and the external AV signal source, press the Input button to activate the Input menu, then select AV3 (Component) or AV4 (Component) and press the Enter button to enter the selected mode.
System Connections Connecting to HDMI Output Device This unit can be connected to an AV device with HDMI output. See the below figure for details: After connecting, turn on the power to the unit and the external HDMI output device, press the Input button to activate the Input menu, then select HDMI and press the Enter button to enter the HDMI mode.
System Connections Connecting to External AV Device (AV Out) Use the audio/video cables to connect the audio and video output Jacks on the right side of the rear panel to the external AV device. Special Notes: The features of this A/V equipment allows you to connect to other A/V equipment. Care should be taken when connecting the A/V outputs of this device to the A/V inputs of the other device. For example, composite output of this device needs to be connected to composite inputs of the other device.
System Connections Connecting to Digital Amplifier The unit is equipped with an optical digital audio jack that can be connected to a digital amplifier, (see the figure below) - 18 -
System Connections Connecting to PC The unit can be connected to a PC (personal computer) via a VGA cable. Follow the instructions and figure below to connect to a PC: 1. Connect one end of the VGA cable to the VGA input connector on the right side of the unit’s rear panel. 2. Connect the other end to the PC VGA output connector. 3. Connect one end of the audio cable to the PC audio input jacks on the right side of the unit’s rear panel. 4. Connect the other end to the PC audio output jack. 5.
System Connections (Continued) Connecting to TV Signal Input This unit can be connected to a TV signal output source via the 75Ω antenna jack on the rear panel. After connecting, turn on the power to the unit, press the Input button and select TV mode. Connecting to AC Power One end of the AC power cord gets connected to the AC power connector on the rear panel of the unit. The other end of the AC power cord gets connected to a 110 ~220V AC outlet.
System Connections (Continued) Connecting to Headphone This unit can be connected to a headphone for private listening. See the below figure for details: Note: Turn down the volume before connecting the headphone.
Input Source Selecting The unit supports multiple video modes, which the user selects via the input menu. Press the Input button to activate the Input menu, the screen will display the following: Press the direction button to select the desired video mode, followed by pressing the Enter button to activate the selected mode.
System Setup and Operation Preparations 1. Connect the unit to the required power, antenna and video sources then press the POWER button to turn on the unit. 2. Press the Input button to display the Input menu, then press the or button to select TV. Follow by pressing the Enter button to activate the TV mode.
System Setup and Operation (Continued) Manual Ch Search Press the ▲ or ▼ button to select the Manual Ch Search, then press the Enter button to activate the Manual Channel Set Menu, refer to the figure to the right : In the menu, press the direction buttons to select items, press the Enter button to confirm or set, press the Exit button to exit.
System Setup and Operation (Continued) Brightness Press the ▲ or ▼ button to select the Brightness then press the Enter button to activate the adjustment mode. Press the ◄ or ► button to adjust the brightness. Press the Enter button to confirm and return. Sharpness Press the ▲ or ▼ button to select the Sharpness then press the Enter button to activate the adjustment mode. Press the ◄ or ► button to adjust the sharpness. Press the Enter button to confirm and return.
System Setup and Operation (Continued) Selecting an Audio Parameter for Setup Press the Menu button to activate the main setup menu, as shown on the right: Press the ▲ or ▼ button to select the Audio then press the ◄ or ► button to enter the setup menu. Press the ▲ or ▼ button to select one of the Audio parameters for setting. Press the ◄ or ► button again to return to the previous menu. Press the Exit button to exit the setup menu.
System Setup and Operation (Continued) Selecting a Feature for Setup Press the Menu button to activate the main setup menu, as shown on the right: Press the ▲ or ▼ button to select the Feature then press the ◄ or ► button to enter the setup menu. Press the ▲ or ▼button to select one of the features for setting. Press the ◄ or ► button again to return to the previous menu. Press the Exit button to exit the setup menu.
System Setup and Operation (Continued) Selecting an Advanced Video Menu Item for Setup Press the ▲ or ▼ button to select Advanced Video Menu then, press the Enter button to activate the Advanced Video Menu Setup Screen. See the figure to the right. Press the ▲ or ▼direction buttons to select items then press the Enter button to cycle through the available settings. Once the desired setting is selected, press the Exit button to exit.
System Setup and Operation (Continued) Parental Control Menu When the correct password is inputted, the parental control menu will be displayed on the screen, see the below figure: Fantasy violence [FV], adult languages [L], sexual situations [S], violent scenes [V] and suggestive dialogues [D] In the parental control menu, press the direction buttons to position the blue box at the desired MPAA or TV rating then press the Enter button to set the rating. Press the Exit button to exit the setup menu.
DVD Player Operation Disc Loading Steps: 1. Press the POWER button to turn on the power. Press the Input button and select DVD mode, press the Enter button to select DVD mode. 2. Insert the disc with its printed side facing you into the disc tray. (Refer to the figure below.) 3. Disc will automatically be pulled into the disc player. While the disc is loading, “Loading” will appear on the liquid crystal display and playback will begin. Warning: Do not play poor quality discs that may damage the player.
DVD Player Operation (Continued) Pause Press the Pause button once to pause the playback, press it repeatedly to start step-by-step playback, press the Play button to resume normal playback. Previous and Next Press the button to go to the next chapter. Press the button once to return to the beginning of the current chapter, press it twice to go to the previous chapter. Fast Playback Press the or button on the remote control to activate fast forward or backward playback.
DVD Player Operation (Continued) CD Playback The player will play all tracks on a CD disc by default. You can use the and (PREV/NEXT skip) buttons, or number buttons to select a specific track. Stop ■ Press the ■ Stop button once to stop playback and then press Play button to resume. Press this button twice to stop playback completely. Pause Press the Pause button to pause the playback and then press the Play button to resume normal playback.
DVD Player Operation (Continued) JPEG Playback JPEG is a common picture format that requires small amounts of storage per image and has low loss in resolution. Hundreds of pictures can be stored on a disc in this format. In order to view JPEG photo albums, you can ask your film development company to make a ”PICTURE CD” when they develop your film. Normal Playback Insert a JPEG disc into the player and allow it to load. Upon completion of the load process the root menu will be displayed on the screen.
USB and SD/MS/MMC Card Function USB and SD/MS/MMC Card Function Preparation: 1. Press POWER to turn on the unit. 2. Press the Input button and select DVD, press the Enter button to shift to DVD mode. 3. Insert the USB memory stick into the unit’s USB slot, or insert the SD/MS/MMC card into the SD/MS/MMC card slot on the right side of the unit. Please see the below figure: Make sure that files are stored on the USB and the SD/MS/MMC card before the installation. 4.
DVD System Setup Preparations 1. Press the Input button and select DVD, press the Enter button to activate DVD mode. 2. Press the Setup button on the remote control to display the settings menu. The menu includes General setup, Audio setup, Video setup, Preference. 3. Press the direction buttons on the remote control to select a category. All the items in the category will appear on the screen. 4. Press the Setup button again to exit the setup.
DVD System Setup (Continued) OSD Lang 1. Press the ▲ or ▼ direction buttons to select OSD Lang. 2. Press the Enter button to enter the setup. 3. Use the ▲ or ▼ direction buttons to select a language. 4. Press the Enter button again to confirm selection and return. Captions 1. Press the ▲ or ▼ direction buttons to select Caption. 2. Press the Enter button to enter the setup. 3. Use the ▲ or ▼ direction buttons to select on or off. 4. Press the Enter button again to confirm selection and return.
DVD System Setup (Continued) Media Center 1. Press the ▲ or ▼ direction buttons to select Media Center. 2. Press the Enter button to enter the setup. 3. Use the ▲ or ▼ direction buttons to select DVD, USB, SD/MMC or MS. 4. Press the Enter button again to confirm selection and return.
DVD System Setup (Continued) Dynamic 1. Press the ▲ or ▼ direction buttons to select Dynamic. 2. Press the Enter button to enter the setup, the screen will display as shown on the left: 3. Use the ▲ or ▼ direction buttons to adjust. 4. Press the Enter button again to confirm setting and return. 5. Press the button to return. Hdcd Setup In the Audio Setup Page, use the ▲ or ▼ direction buttons to select Hdcd Setup, press the Enter button to enter the setup mode, the screen shown will be displayed; 1.
DVD System Setup (Continued) HD Mode Use the ▲ or ▼ direction buttons to select HD Mode, press the Enter button to enter the menu. The following screen will be displayed: 1. Press the Enter button to enter the setup. 2. Use the ▲ or ▼ direction buttons to select items. 3. Press the Enter button again to confirm selection and return. 4. Press the button to exit. Video Quality Setup Select Quality then press the Enter button to enter the setup mode. The screen shown below will be displayed: 1.
DVD System Setup (Continued) Contrast 1. Press the ▲ or ▼ direction buttons to select Contrast. 2. Press the Enter button to enter the setup mode, the screen will display as shown on the left: 3. Use the ◄ or ► direction buttons to adjust the level. 4. Press the Enter button to confirm setting and return.
DVD System Setup (Continued) Subtitle 1. Press the ▲ or ▼ direction buttons to select Subtitle. 2. Press the Enter button to enter the setup mode, see the left figure: 3. Press the ▲ or ▼ direction buttons to select Subtitle language. 4. Press the Enter button again to confirm setting and return. Disc Menu 1. Press the ▲ or ▼ direction buttons to select Disc Menu. 2. Press the Enter button to enter the setup mode, see the figure to the left: 3. Press the ▲ or ▼ direction buttons to select Menu language. 4.
Troubleshooting SYMPTOM CHECK ITEM The player does not play. Make sure disc is loaded in. Make sure disc is loaded with label facing you. Make sure disc is not dirty or warped. Make sure the player’s region code is the same as region code of DVD disc. Make sure water condensation has not occurred. If it occurs, take out disc and leave the player on for at least one hour. There is no sound. Make sure system connection is correct. Make sure the sound setup of DVD disc is correct.
Specifications TFT-LCD Resolution 1366x768 TFT-LCD Screen Size 27 inches Laser Wavelength 780/650 nm Video System NTSC Frequency Response 20Hz 20kHz Audio Signal-to-noise Rate ≥85dB Audio distortion+noise ≤ 70dB (1kHz) Channel Separation ≥70dB (1kHz) Dynamic Range ≥80dB (1kHz) ±2.5dB Audio Out Analog Audio Out Out Level: 1.5V±0.2 1.0 , Load: 10KΩ Video Out Video Out Out Level: 1VP-P±0.
