OWNER’S MANUAL ELECTRONICALLY TUNED AM/FM/MPX RADIO WITH AUTO-REVERSE CASSETTE PLAYER, CD PLAYER, CD CHANGER CONTROLS AND QUARTZ CLOCK Model GC-600
Operating Instructions 1) ON/OFF POWER BUTTON Press this knob to turn the unit on or off. 2) VOLUME CONTROL To increase the volume level, turn this knob clockwise. The volume will increase with each detent position of the control and level will be shown by the bars on the display panel. To decrease the volume level, turn the knob counter-clockwise.
4) BASS CONTROL To adjust the bass level, first select the Bass mode by pressing the Select knob (3) once so that the “BAS” indication appears on the display panel. Within 5 seconds of choosing the Bass mode, turn the knob clockwise to increase the bass response or counter-clockwise to decrease the bass response as desired. The level will be shown by the bars on the display panel from a minimum of to a maximum of (the diamond in the center represents flat response).
panel. The display will automatically return to the volume indication 5 seconds after the last adjustment is made. 8) FRONT/REAR FADER CONTROL To adjust the front-rear speaker balance, first select the Fader mode by pressing the Select knob (3) five times so the “FAD” indication appears on the display panel. Within 5 seconds of choosing the Fader mode, turn the knob clockwise to fade the sound to the rear speakers or counter-clockwise to fade the sound to the front speakers.
2. Select the first station to be pre-set using the Manual Up/Down or automatic Seek Tuning Controls (10). 3. Press the pre-set button to be set and continue to hold it in. The volume will be momentarily muted and the pre-set number will appear on the display panel indicating that the station is now set into that memory position and can be recalled at any time by pressing that pre-set button. 4.
18) TAPE PAUSE SELECTOR Pressing this button will temporarily stop play of the tape (the indication will flash on the display panel). Press the button again to resume play of the tape from the point at which it had stopped. 19) EJECT BUTTON ( ) Tape playback is stopped and the cassette is ejected by pushing this button. Radio, CD player, or CD changer operation will automatically resume when the cassette is ejected, depending on which mode was in operation prior to cassette play.
24) TRACK SCAN (SCAN) During disc play, press this button to play the first 10 seconds of each track on the disc (“SCAN” will appear on the display panel ). When a desired track is reached, press the Scan button again to cancel the function and play of the selected track will continue. The Track Scan mode will also be canceled by activating the Repeat Play (25), Shuffle Play (25), or Track Select (21) functions.
activated under the following circumstances as it will erase the time and station pre-set memories. 1. Upon initial installation after wiring is completed. 2. If there is a malfunction of any of the switches on the unit, pressing the Re-Set button may clear the system and return to normal operation. SETTING THE CLOCK 1. Switch the vehicle ignition “on” and the radio “off” (the time will be shown on the display panel). 2.
CD CHANGER CONTROLS Built into the radio are controls to operate an optional 10-disc or 6-disc CD changer. Please check with your SPS/AUDIOVOX or PRESTIGE car stereo specialist for recommendations of the models that will work with this radio. Adjustments of the audio functions (volume, tone, balance, and fader) operate in the same manner during CD changer play as they do for radio, CD, and cassette play. The following controls will operate the CD changer when it is installed and connected to this radio.
37) TRACK/DISC SCAN (SCAN) When the Scan button is pressed, the “SCAN” indication will appear on the display panel and the first 10 seconds of each track on the disc will be played in order. When a desired track is reached, press the Scan button again and play of that track will continue (“SCAN” will disappear from the display panel). The Track Scan mode will also be canceled by activating any other disc function (Select, Cue, Review, Shuffle, or Repeat).
CD CHANGER ERROR SIGNS If a problem should develop while operating the CD changer, the following error sign indications may appear on the display panel. E:01 Indicates abnormal disc changer function. Consult your car stereo specialist or service facility for further assistance. E:02 Indicates excessive temperature conditions. The error sign will go off and play will resume when the changer temperature returns to normal range. E:07 Indicated disc may be loaded in the magazine upside-down.
CARE AND MAINTENANCE The radio and CD player sections of your new sound system do not require any maintenance. We recommend you keep this manual for future reference on how to set the clock and for general reference of the many features found in this unit. As with any cassette player, the cassette section of this sound system does require a minimum of maintenance to keep it in good working condition.
Accessory List Description AVT-988 9” Color Television with Remote (12V) AVT-597 5” Color Television with Remote (12V) AVT-1498 13” Color Television with Remote (12V) AVP-7000 Video Cassette Player (12V) AVP-7285 Video Cassette Player (12V) Wireless Headphone Kit: Includes 2 sets Wireless Headphones and Transmitter BPA-501-12 4 Amp Adapter for use with AVT-988 9” and AVT-1498 13” Televisions AC2A- 2 Amp Adapter for use with AVT-597 5” TV and AVP-7000 Video Cassette Player Unified Remote Control VAC-21- 12 V
