Owner's Manual

Operation Display Adjustments
• Mirror Mode: After installation and
before driving, place the FDM in mirror
mode by pushing the toggle switch
at the base of the mirror away from
the driver (toward the windshield).
Adjust the mirror as necessary for
proper vision out of the rear window.
• Display Mode: To activate display
mode, pull the toggle switch toward
the driver. This illuminates the display
to provide a real-time, wide-angle video
feed from the rearward-facing camera.
• Reverse Mode (if equipped): To activate
reverse view, place vehicle in reverse.
This switches to reverse view to
provide a real-time view of the area
behind your vehicle.
Display Mode: To activate display mode,
pull the toggle switch toward the driver.
This illuminates the display to provide
a real-time, wide-angle video feed from
the rearward-facing camera. Activate the
display menu by pressing “Select” while
in display mode. Pressing “Select” one
or more times will navigate through the
menu options to the right.
Note: Changes may not be saved if the
FDM is switched to mirror mode.
Warning: The menus may block visibility.
It is not recommended to use the menu
to change settings unless the vehicle is OFF
or in PARK.