Owner's Manual

Troubleshooting
Mirror shows the video display and
reflection of vehicle interior. Mirror
has excessive glare in display mode.
Switch mirror back into mirror mode
by pushing toggle switch forward. Then
readjust mirror head so that driver
has a clear rearward view. When placed
back into display mode, the mirror head
will be tilted upward, removing the
interior reflection.
Mirror display is hazy, gray, or foggy.
Check rear glass to ensure it is clean.
During certain weather conditions the
rear vehicle glass can become foggy with
condensation. Switch to mirror mode until
camera view is clear again. Turning on the
rear defroster will usually solve this issue.
Mirror display appears obstructed
or out of focus.
Switch to mirror mode until it is safe to
examine the camera and rear of vehicle
for obstructions, dirt, water droplets, etc.
Mirror display appears grainy
at nighttime.
In order to display the best possible
image, the camera will automatically
adjust its frame rate during dark
conditions. A lower frame rate can
make the display appear grainy. The
camera is still operating as intended.