Owner's Manual

Adjust camera image using mirror settings. Adjust the tilt up

or down so the image is centered. The image may still appear

rotated, however the product is equiped with an auto rotate

feature. You will notice the screen shift periodically for the  rst

30-60 minutes of driving. After that time the image will be level.

Please refer to quick reference guide for full menu instructions.

Adjust camera up or down on the window bracket so the image

(in display mode) has the horizon in the upper third of the mirror.

Tighten both set screws on camera mounting bracket. Do not over

tighten.

Install the wire cover over the two harnesses by seating the

bottom of the cover into the mirror mount and then sliding the

top of the cover up to the headliner.

Install camera cover. Secure camera cover with the two T-15

screws provided. Do not over tighten.

Mirror settings

R B